Kent · England
Floor & skirting joints in Aylesford, Kent
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homeowners, landlords and businesses in Aylesford. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Perimeter joints in tiled floors filled with grout
- Open joints that fill with dirt
- Threshold joints that have opened or worn
How we handle floor joint sealing in Aylesford
Good floor joints come down to the right product and clean, prepared edges. We remove what’s there first, the joint is cleaned and backed where needed, then the new sealant goes in. If you are dealing with threshold joints that have opened or worn and skirting caulk that keeps splitting, we can help, on concrete floor joints, wet room & bathroom floors and commercial floors alike.
For a new home in or near Aylesford, it’s worth checking the sealant early. Gaps at skirtings, shower seals pulling away and missing mastic around frames are common snags.
Our work is backed for twelve months.
- Where
- Aylesford (ME20)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What sealant work can’t fix
It helps to know what we can’t do too:
- Failed waterproofing under a wet room floor
- Tiles that have lifted or broken
- Movement too big for a sealant joint
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Where we work in Aylesford
- Commercial floors
- Tiled floors
- Skirting boards
- Concrete floor joints
- Thresholds
- Wet room & bathroom floors
Floor joint sealing in Aylesford: local notes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Community buildings like Aylesford Church are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. For site and facilities teams at buildings such as Aylesford Primary School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Aylesford is about 3 miles north-west of Maidstone, in Kent. For floor joint sealing in and around Aylesford, please ring 0345 464 0079 or email us for a quick quote. We cover Kent from our Crawley base, Aylesford included. Our area takes in 922 places across Kent. You can also see our page for London, roughly 28 miles from Aylesford.
Every address in ME20 is within our area for floor joint sealing, from the main roads to the quietest streets. Whether your property is on Station Road, High Street and Hall Road or a nearby road, we can help. Nearby, we also carry out floor joint sealing in Ditton (1 mile west), Allington (1 mile south-east), East Malling (2 miles west), Well Street (2 miles south-west) and Fant (2 miles south). Further out, we also cover Maidstone (3 miles south-east), Sittingbourne (12 miles east), Dartford (15 miles north-west), Sevenoaks (12 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (10 miles north-west).
Near you in Aylesford
In Aylesford, that means homes and buildings near Aylesford School, The Chequers pub and Ditton Quarry. Aylesford has its own railway station: Aylesford station. Nearby you’ll also find Allington Castle (1.7 miles east) and Medway megaliths (1.7 miles north-east). Open spaces near Aylesford include Burham Down and Blue Bell Hill.
Aftercare tips
Good habits help new joints last longer. Our tips:
- Do not fill floor joints with caulk where they move or get wet
- Don’t slide heavy items over sealed joints
- Sweep along the edges of the floor
- Keep heavy wheels off new concrete joints until cured
Mop with a well-wrung mop rather than flooding the floor. Less water at the edges helps the joints last.
A gap under the skirting collects dust and lets draughts through. Sealing it keeps the room tidier and the edges sound.
How we quote for floor joint sealing
The quote reflects the job in front of us. We take into account:
- Whether there’s mould to deal with
- How much there is to do
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
What to tell us for a quote
To make quoting easier, let us know:
- If someone has resealed it before
- Photos by email, if that’s easy
- The problem you’ve noticed
- If it’s domestic, commercial or a hotel
We don’t publish a price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or email us.
Aylesford questions
Do you cover smaller places like Aylesford?
Yes. Aylesford is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Aylesford station?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.
Why does the gap under my skirting keep coming back?
Movement from drying timber and settling floors. Rigid fillers split, so we use a flexible sealant.
Can you seal where the floor meets the bath panel?
Yes. Wet-area floor joints are sealed with a flexible, water-resistant silicone.
How long does floor joint sealing take?
Typically it takes a few hours for most rooms, longer for large commercial floors. Larger jobs naturally take longer.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.
Can you reseal concrete floor joints in an industrial unit?
Yes. We reseal concrete floor joints in commercial and industrial units. The product is chosen for the traffic the floor takes.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Leave it or put it right?
The right product depends on the floor and the traffic: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Using the wrong one is why many floor joints fail. In an older home around Aylesford, damp from a failed joint can get into timber and plaster, and that’s a much bigger job than renewing the sealant.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What you get with us
- Trusted Arbo and Everbuild sealants
- Approved under the ARBOMaster scheme
- You choose the colour before work begins
- A 12-month guarantee on all work
Take a look at how sealant jobs are priced and our reviews.
Towns and villages near Aylesford
What else we do in Aylesford
How the visit works
Every visit runs the same way: we check the joints, protect the area around them, carry out the job and clear up. Most jobs take a morning or an afternoon for most homes. A visit to Aylesford is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- The room is cleared along the joints so we can reach them.
- We take out the cracked caulk, grout or old sealant.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied.
- Finally, we check the work and talk you through aftercare.
How to prepare
- Clear the area around the work
- Tell us about any water getting in
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Simply phone 0345 464 0079 or email us and describe the job.
Related advice
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Signs you need floor joint sealing in Aylesford
Grout is rigid, so a tiled floor with nowhere to move cracks along a grout line. You will see a crack running along the grout, showing where a movement joint was needed.
It’s worth asking for a quote if you see:
- Failed seals where bathroom floors meet baths and panels
- Grout used at the floor edge instead of sealant
- Cracked grout where a tiled floor needs a movement joint
- Cracked caulk along skirting in bathrooms and kitchens
If you let a flat or house near Aylesford station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
What your quote should include
- How the joint is cleaned and prepared
- Whether they’re fully insured
- The length of the guarantee
- Is the old sealant removed completely?