Highland · Scotland
Floor & skirting joints in Aultbea, Highland
Floor joints in Aultbea need attention? We cut out the old, prepare the joints and apply the right sealant.
- Failed joint filler in concrete floors
- Threshold joints that have opened or worn
- Perimeter joints in tiled floors filled with grout
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Cone off fresh joints until they’re ready
- Get cracks along tile grout lines looked at early
- Check skirting joints after the heating season
- Do not slide heavy items over sealed joints
Keep heavy traffic off resealed concrete joints for the cure time we give you. Mark the area off so drivers avoid it.
Once concrete joint edges start to break, wheels make it worse. Early resealing helps keep the joint intact and the surface smoother.
Floor joint sealing in Aultbea, done properly
Good floor joints come down to the right product and clean, prepared edges. We remove what’s there first, the joint is cleaned and backed where needed, then the new sealant goes in. We work on skirting boards, thresholds and concrete floor joints, and people most often call us about worn sealant at door thresholds and rigid edge joints in tiled floors.
Timber frame is common in newer Scottish homes, and it settles over the first years, so skirting and floor joints can open up. In older homes, timber floors move through the year too.
Each job carries a 12-month guarantee.
- Location
- Aultbea (IV22)
- Wider area
- Highland
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
More services for Aultbea
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours, depending on the length of joint. For a place like Aultbea, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we check the joint and the floor and agree which sealant suits it.
- Old caulk, grout or sealant is removed from the joint.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Let us know about earlier repairs to the joints
- Clear the area around the work
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Read more
When it is not the sealant
We will not take on work that will not last, so these are the limits:
- Water getting under the tiles from elsewhere
- Floors that are uneven or need levelling
- Movement too big for a sealant joint
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before booking.
What we seal
- Skirting boards
- Thresholds
- Tiled floors
- Concrete floor joints
- Commercial floors
- Wet room & bathroom floors
Your questions about floor joint sealing in Aultbea
Is Aultbea within the area you cover?
Yes, we do. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is there a guarantee on floor joint sealing in Aultbea?
All our work, in Aultbea and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Is it OK to seal over old sealant?
No. New silicone will not bond to old silicone, and it traps any mould or water underneath. We remove it all first.
Can tenants book the work?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
What do you need from me for a quote?
Tell us what needs doing and where, with photos by email if possible. If we need more, we will ask.
Do you seal floor joints in bathrooms and kitchens?
Yes. Floor edges in bathrooms and kitchens get wet at every clean, so a flexible silicone is the right choice.
Will the old sealant be removed?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
How long will you be here?
Typically it takes a morning or an afternoon for most homes. Bigger jobs take longer.
Leave it or put it right?
Water that gets past a floor joint can damage the floor beneath. Sealing them now keeps the problem at the surface. In a place like Aultbea, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why Aultbea customers choose us
- Any old sealant cut out fully, not covered over
- Anti-fungal sanitary silicone in wet areas
- Neat joints and a tidy finish
- Rated 4.9 stars on Google
Take a look at what affects the cost and our reviews.
What affects the quote in Aultbea
You will get a clear quote before work begins. It takes into account:
- Mould in or behind the old joints
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- The number and length of the joints
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Asking for a quote
Photos help, but a description is a good start. Try to tell us:
- The rough size of the job
- Whether it has been sealed before
- The address or postcode of the job
- Any access issues, like height or stairs
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we will talk you through the work and give you a clear quote.
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Common problems we fix in Aultbea
Wheels crossing an unfilled concrete joint chip its edges. Hard wheels damage the joint edges and the joint gets wider.
Keep an eye out for these signs:
- Chipped and open joints in warehouse floors
- Cracked caulk along skirting in bathrooms and kitchens
- Cracked grout where a tiled floor needs a movement joint
- Dirt and water collecting in open floor joints
Community buildings like Aultbea Church are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Comparing quotes
- Whether they’re fully insured
- What preparation is included
- How long to leave it before use
- Who does the work, and how experienced they are
Floor joint sealing around Aultbea
Across Highland, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That’s why the skirting and threshold joints need a flexible seal. Timber frame is common in newer Scottish homes, so skirting and sealant joints can open up as the building settles.
Around Aultbea, as everywhere, floor joint sealing is only as good as the preparation behind it.
Aultbea is in Highland. Anywhere in IV22, we cover floor joint sealing for homes and businesses. 253 places in Highland are on our list, large and small.
Our applicators cover all of IV22 for floor joint sealing. We also cover the places around Aultbea: Àird (1 mile west), Laide (2 miles north-east), Inverasdale (4 miles south-west), Poolewe (5 miles south) and Gairloch (9 miles south-west). For island and remote addresses, a little more planning is needed.
Landmarks near Aultbea
Nearby you will also find Arctic Convoy Museum (under half a mile north-west). Open spaces near Aultbea include Loch a' Bhaid-luachraich.