Oxfordshire · England
Fire-rated sealant in Sunnymead, Oxfordshire
We cover Sunnymead for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Unsealed gaps where pipes and cables go through a wall
- Open gaps behind door architraves
- Fire stopping disturbed by later work
What happens if it’s left?
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job. In an older home around Sunnymead, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- Full insurance on every job
- We leave the area clean and tidy
- 20+ years of sealant experience
- Homes, businesses and hotels
See what affects the cost and our reviews.
How we handle fire rated sealant in Sunnymead
We can work through a building room by room or floor by floor. It gives you a list to keep with the building’s fire safety documents. If you have ordinary sealant used where a fire-rated product was needed and gaps around pipes and cables through fire-resisting walls, we can put it right, whatever the surface.
Community buildings, schools and small businesses around places like Sunnymead have washrooms and kitchens that see a lot of use. Their sealant and fire-rated joints are as important as those in any bigger building.
We stand behind the work with a 12-month guarantee.
- Place
- Sunnymead (OX2)
- Wider area
- Oxfordshire
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Make resealing part of every contractor’s brief
- Never patch a fire seal with standard sealant
- Include fire stopping when you schedule refits
- Flag any open gap you spot round a pipe or cable
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the job gets bigger.
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes anything from a few hours to several days, depending on how many gaps there are, including the tidy-up. Parking around Sunnymead is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Plan for the work area to be out of bounds to pets and children
- Mention any leaks or damp you’ve noticed
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, ring 0345 464 0079 or drop us an email.
Related advice
What affects the cost of fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The old material and how stubborn it is
- How much there is to do
- The type of sealant required
- Mould in or behind the old joints
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
When you contact us, it’s useful to know:
- A few photos by email, if you can
- If someone has resealed it before
- Any access issues, like height or stairs
- How many joints, rooms or windows are involved
For fire rated sealant in Sunnymead, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before any work starts.
Landlords, agents and businesses in Sunnymead
If you manage several properties in or around Sunnymead, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Hotels need rooms back in use, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Assessing a building’s fire safety
- Sign-off of the building, which sits with building control or your assessor
- Openings too large for sealant, which need batts, boards or another system
If you’re not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before you book.
Where we work in Sunnymead
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Door frames
- Flats & HMOs
- Linear gaps
What fire rated sealant looks like in Sunnymead
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details. There are hotels and other places to stay in and around Sunnymead. Hotel work can be planned room by room, with out-of-hours working where needed.
For landlords with property near Oxford Parkway station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. If you look after a building such as Cutteslowe Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Sunnymead is about 3 miles north-west of Oxford, in Oxfordshire. Across the OX2 area, we cover fire rated sealant for homes and businesses. Sunnymead is one of 443 places in Oxfordshire we cover for fire rated sealant.
Work in OX2 works the same way as everywhere else we cover. If you need fire rated sealant at a property on Wren Road, Scott Road and Wyatt Road or a nearby road, we can help. You will find Sunnymead on the A4165, which makes it straightforward to reach with everything needed for fire rated sealant. If you are just outside Sunnymead, we cover Cutteslowe (1 mile north), Summertown (1 mile south), North Oxford (1 mile south), Wolvercote (1 mile west) and Park Town (1 mile south). Further out, we also cover Oxford (3 miles south-east), Didcot (12 miles south), Bicester (9 miles north-east), Abingdon-on-Thames (7 miles south), Witney (10 miles west) and Carterton (14 miles west).
Near you in Sunnymead
Around Sunnymead, our work takes us to homes and buildings near St Hugh's College Main Building Including Library, Oxford University Parks and Dew Drop Inn, among other places. Other local landmarks include Summer Fields School (0.5 miles south) and Oxford Academy (0.7 miles south). The nearest railway station is Oxford Parkway station, about 1.4 miles north of the centre. A little further out are Oxford Castle (2.3 miles south) and Oxford University Museum of Natural History (1.8 miles south). The countryside around Sunnymead includes Hook Meadow and The Trap Grounds and Headington Hill.
Also near Sunnymead
More services for Sunnymead
Questions from Sunnymead
Will you come out to Sunnymead?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Oxford Parkway station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.
Can ordinary silicone be used in a fire-stopping gap?
No. A gap that needs fire stopping needs a tested fire-rated product.
Where are you based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Will you assess my building’s fire safety?
No. We work from the specification you give us and install to the manufacturer’s details.
Do you remove the old sealant?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
What fire rating will the seal have?
We do not certify fire stopping or quote ratings. Our part is installing the specified product to its tested details and giving you a record of where it went.
Can you do several jobs on one visit?
Of course. Doing several areas at once is usually more efficient.
Common problems we fix in Sunnymead
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
Any of these means the joints need attention:
- Damaged fire sealant left by other trades
- Ordinary sealant used where a fire-rated product was needed
- Gaps flagged on a fire risk assessment
- Open gaps behind door architraves
Community buildings like Roman Catholic Church of St Gregory and St Augustine are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- Is VAT in the price?
- Is the old sealant removed completely?
- What guarantee comes with the work