Oxfordshire · England
Cutteslowe Fire Rated Sealant
Fire rated sealant for Cutteslowe and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- New service routes left unsealed after building work
- Gaps filled with a product that isn’t fire-rated
- Linear gaps at the head of walls
Fire rated sealant for homes and businesses in Cutteslowe
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. That record is useful for your files and for whoever looks at the building next. Common call-outs are for gaps flagged on a fire risk assessment and ordinary sealant used where a fire-rated product was needed, across linear gaps, door frames and pipe & cable gaps.
For a pub, café, guest house or shop in or near Cutteslowe, the washrooms and kitchen need the same attention as a big site, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
A one-year guarantee comes as standard, so you are not left on your own once the job is done.
- Place
- Cutteslowe (OX2)
- Region
- Oxfordshire
- Cover
- A year, on every job
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Your questions about fire rated sealant in Cutteslowe
I let a flat near Oxford Parkway station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Do you cover smaller places like Cutteslowe?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
How long will you be here?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including the preparation. Your quote will say how long we expect yours to take.
Does someone need to be in?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
What’s the difference between intumescent and fire-rated sealant?
An intumescent sealant expands when it gets hot to help seal the gap. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
What information do you need?
A short description and the location, with photos by email if possible. If we need more, we’ll ask.
Do you take out the old sealant first?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Can you do several jobs on one visit?
Yes. More than one area can go on one quote.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a handful of gaps, and longer for a whole building, including the tidy-up. In a smaller place like Cutteslowe, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
- Mention any sign-in or site rules at work premises
Ask for a quote
To get a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Related advice
How we quote for fire rated sealant
Jobs vary more than people expect. The main factors:
- Which sealant suits the joint
- The amount of work
- How many areas need sealing
- Any working-time requirements on site
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Pictures of the joints, sent by email
- Roughly how big the job is
- What’s wrong with the joints now
- Where the property is
If you’re in Cutteslowe and need fire rated sealant, ring 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Take photos of fire stopping before ceilings or boxing go back
- Flag any open gap you spot round a pipe or cable
- Make resealing part of every contractor’s brief
- Ask which product was used before you paint
Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.
Open gaps do not only matter in a fire: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Commercial buildings in Cutteslowe
There are hotels and other places to stay in and around Cutteslowe. Hotel work can be planned room by room, with out-of-hours working where needed. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For buildings such as Roman Catholic Church of St Gregory and St Augustine, service openings in its walls need the right fire-rated sealant, as in any building. Schools such as Cutteslowe Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Cutteslowe is about 3 miles north-west of Oxford, in Oxfordshire. We provide fire rated sealant to homeowners, landlords and businesses in Cutteslowe, as part of our work across Oxfordshire. Cutteslowe is one of 443 places in Oxfordshire we cover.
Here we cover the OX2 postcode area for fire rated sealant. Fire rated sealant is available to properties on Wren Road, Scott Road and Wyatt Road and the roads around them. You’ll find Cutteslowe on the A4165, so it’s easy for us to get to with everything needed for fire rated sealant. If you are just outside Cutteslowe, we cover Sunnymead (1 mile south), Summertown (1 mile south), North Oxford (1 mile south), Wolvercote (1 mile west) and Godstow (2 miles south-west). We also work in nearby towns such as Oxford (3 miles south-east), Didcot (12 miles south), Bicester (9 miles north-east), Abingdon-on-Thames (8 miles south), Witney (10 miles west) and Carterton (14 miles west).
Landmarks near Cutteslowe
We work in homes and buildings around Oxford University Parks, St Hugh's College Main Building Including Library and The Plough pub, among other places. Other local landmarks include Oxford Academy (1.1 miles south) and Summer Fields School (0.8 miles south). For rail, the closest station is Oxford Parkway station, about 1 mile north of the centre. Other landmarks nearby include Acland Hospital (2 miles south) and Oxford University Museum of Natural History (2.2 miles south). Not far away are Headington Hill and Hook Meadow and The Trap Grounds.
Common problems we fix in Cutteslowe
Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole they leave does not always get resealed.
It’s worth asking for a quote if you see:
- Old fire sealant that has split or come away
- Open gaps behind door architraves
- Unsealed gaps where pipes and cables go through a wall
- Linear gaps at the head of walls
Rented homes near Oxford Parkway station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Comparing quotes
- Is the old sealant removed completely?
- What happens if they find a problem under the old sealant
- Which colour the sealant will be
- Whether they’re fully insured
Surface by surface
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run leaving no stretch unsealed.
Places near Cutteslowe
More services for Cutteslowe
Landlord and commercial work in Cutteslowe
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.