Scottish Borders · Scotland
Fire-rated sealant in Stow, Scottish Borders
Our applicators work in Stow on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps where pipes and cables go through a wall
- Gaps left after a refit or conversion
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Problems with the door itself rather than the gap around the frame
- Walls or floors that weren’t built to resist fire
- Deciding what fire stopping a building needs
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before you book.
Where we work in Stow
- Plasterboard & masonry
- Linear gaps
- Service penetrations
- Pipe & cable gaps
- Flats & HMOs
- Door frames
How we handle fire rated sealant in Stow
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. We work on linear gaps, service penetrations and pipe & cable gaps, and common reasons people get in touch are old fire sealant that has split or come away and holes left by a change of layout.
For a place like Stow, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
Each job carries a 12-month guarantee, whatever its size.
- Place
- Stow (TD1)
- Wider area
- Scottish Borders
- Cover
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What fire rated sealant looks like in Stow
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
If you look after a church, hall or community building such as St Mary's Church, service openings in its walls need the right fire-rated sealant, as in any building.
Stow is about 6 miles north of Galashiels, in the Scottish Borders. Every kind of property in Stow is covered for fire rated sealant, old or new, large or small. Every job comes with our one-year guarantee. 89 places in the Scottish Borders are on our list, large and small. You can also see our page for Edinburgh, about 22 miles away.
Postcode districts we cover here for fire rated sealant: TD1. Fire rated sealant is available to properties on Station Road, Townfoot and Galashiels Road. Other places close to Stow include Killochyett (1 mile north-west), Fountainhall (3 miles north-west), Lauder (5 miles north-east), Clovenfords (5 miles south) and Nether Blainslie (5 miles east). Larger places within reach include Peebles (13 miles west), Selkirk (10 miles south), Innerleithen (9 miles south-west), Melrose (8 miles south-east), Earlston (8 miles south-east) and Langlee (6 miles south-east).
Around Stow
There’s a railway station in Stow itself: Stow station.
Common problems we fix in Stow
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
Signs it’s time to call us include:
- Open gaps behind door architraves
- Damaged fire sealant left by other trades
- Fire seals that have cracked with movement
- Gaps around pipes and cables through fire-resisting walls
For landlords with property near Stow station, any gap left by new services in shared walls should be closed with a fire-rated product.
Questions to ask before booking
- What preparation is included
- Whether all the old sealant comes out first
- What the quote includes, VAT included or not
- What guarantee comes with the work
More services for Stow
How it works
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes anything from a few hours to several days, depending on how many gaps there are. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any leaks or damp you’ve noticed
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Advice
Why it’s worth doing now in Stow
A quick fill with any sealant to hand isn’t fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
Why book with us
- Tidy, careful work
- Quality sealants from Arbo and Everbuild
- 20+ years of sealant experience
- We are fully insured
Take a look at how sealant jobs are priced or customer reviews.
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
If you manage several properties in or around Stow, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
How to look after the new joints
To keep the joints looking good and working properly:
- Ask which product was used before you paint
- Flag any open gap you spot round a pipe or cable
- Include fire stopping when you schedule refits
- Keep pictures of seals that will be hidden
Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the job gets bigger.
Questions from Stow
How do Scotland’s building regulations apply to fire-rated sealant in Stow?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you work for landlords with property near Stow station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Can I add another job to the visit?
Yes. More than one area can be quoted together.
Will we have a record of what was sealed?
Yes. You get a list of where we worked and what we used for your files.
Can you tell me how many minutes the seal will last?
We don’t issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then drop us a line at info@mrmastic.co.uk.
Is the work guaranteed?
Yes. Each job is guaranteed for twelve months, large or small.
Do you take out the old sealant first?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.
How the job changes by surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. The sealant is chosen for what passes through and how wide the gap is.
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both, following the tested detail.