Essex · England
Steventon End Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Steventon End. Fully insured, ARBOMaster approved and guaranteed for a year.
- Open joints along the top of partitions
- Gaps flagged on a fire risk assessment
- Open holes round services passing through fire walls
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Photograph sealed gaps before they’re covered up
- Check whether a sealant can be painted before decorating over it
- Look in service cupboards and ceiling voids from time to time
- Never patch a fire seal with standard sealant
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the list grows.
How we handle fire rated sealant in Steventon End
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. We work on service penetrations, plasterboard & masonry and linear gaps, and the jobs we see most are open joints along the top of partitions and new service routes left unsealed after building work.
If you have holiday lets, a converted barn used for business or a community building near Steventon End, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Steventon End (CB10)
- Region
- Essex
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Workplaces and buildings in Steventon End
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
In and around Steventon End, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint. Managing a site like Ashdon Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Steventon End is about 4 miles north-east of Saffron Walden, in Essex. If you need fire rated sealant in Steventon End, please ring 0345 464 0079 or email us for a quick quote. We are based in Crawley and cover Essex, Steventon End included. We cover 644 towns and villages across Essex, from the larger towns to small villages. For nearby work, see our Chelmsford page (23 miles or so).
Work in CB10 is quoted and booked the same way as anywhere else. Other places close to Steventon End include Ashdon (1 mile west) and Church End (1 mile south-west). Within a short drive, we also cover Saffron Walden (4 miles south-west), Halstead (15 miles south-east), Great Dunmow (13 miles south), Stansted Mountfitchet (12 miles south-west), Bocking (15 miles south-east) and Elsenham (11 miles south-west).
Local landmarks in Steventon End
Typical jobs here are in homes near The Bricklayers Arms Public House. Nearby you’ll also find Saffron Walden Community Hospital (3.9 miles south-west) and Castle Camps (1.7 miles east). Open spaces near Steventon End include Hales and Shadwell Woods and Rivey Hill.
What happens on the day
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and clear up. It usually takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Steventon End needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products for your records.
How to prepare
- Clear items away from the joints we’re working on
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
How to get a quote
Want a quote for fire rated sealant? Please ring 0345 464 0079 or email us with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Read more
What happens if it’s left?
For some gaps, sealant isn’t the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We will say so if a gap needs something other than sealant. Around Steventon End, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- Trusted Arbo and Everbuild sealants
- Old sealant always removed completely
- Anti-fungal silicone where joints get wet
- 20+ years of sealant experience
See our cost guide and customer reviews.
Also near Steventon End
Other services in Steventon End
Different surfaces, different methods
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
When something else is needed
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- A wall that isn’t a fire-resisting element to begin with
- Problems with the door itself rather than the gap around the frame
- Issuing a fire rating or certificate for a building
If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.
Where we work in Steventon End
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Flats & HMOs
FAQs for Steventon End
Is fire rated sealant in Steventon End guaranteed?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Is Steventon End in your area for fire rated sealant?
Yes. We work across London and the South East, and Steventon End is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
Where do you work from?
Our base is Crawley. Our area covers South East England, London and Scotland.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or send us an email.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Are you insured?
Yes, we’re fully insured.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Landlord and commercial work in Steventon End
Landlords and agents in Steventon End can book us as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.