Essex · England
Fire-rated sealant in Shalford, Essex
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Shalford. Fully insured, ARBOMaster approved and guaranteed for a year.
- Open joints along the top of partitions
- Gaps left after a refit or conversion
- Sealant items on a fire risk assessment action list
Commercial buildings in Shalford
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Managing a site like Shalford Primary School? Then service openings in fire-resisting walls need checking after any refurbishment. For buildings such as Parish Church of St Andrew, older buildings that have had new heating or wiring often have service gaps worth checking. If you let a flat or house near Braintree station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Shalford is about 5 miles north-west of Braintree, in Essex. From the centre of Shalford to the outskirts, fire rated sealant is available for homes and businesses alike. Our Essex coverage runs to 644 places, and Shalford is one of them. There’s also a page for Chelmsford, roughly 14 miles from Shalford.
All of CM7 is covered for fire rated sealant. Streets in the area include The Street, Wethersfield Road and Braintree Road, all of which we cover. Neighbouring places we cover for fire rated sealant include Sand Hill (1 mile north), Church End (1 mile south), Beazley End (1 mile south-east), Almshouse Green (3 miles north-east) and Bocking Churchstreet (3 miles south-east). Within a short drive, we also cover Chelmsford (14 miles south), Braintree (5 miles south-east), Witham (11 miles south-east), Saffron Walden (12 miles north-west), Halstead (6 miles east) and Great Dunmow (7 miles south-west).
Around Shalford
Typical jobs here are in homes near The George Public House, among other places. The nearest railway station is Braintree station, roughly 4.9 miles south-east of the centre. Other landmarks nearby include Braintree Community Hospital (4.2 miles south).
Fire rated sealant in Shalford
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. Each gap is sealed to the product maker’s tested detail for its size and substrate. If you have cracked or shrunken fire-rated sealant and open gaps behind door architraves, we can help, on flats & HMOs, linear gaps and service penetrations alike.
Work in a small place like Shalford is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
Our work is backed for twelve months, in Shalford and everywhere else we cover.
- Where
- Shalford (CM7)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Can I do it myself?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Flag any open gap you spot round a pipe or cable
- Keep the record of products and locations with your fire safety documents
- Include fire stopping when you schedule refits
- Keep pictures of seals that will be hidden
Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.
How the visit works
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Shalford needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Mention any parking rules near the property
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
Getting a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work.
Related advice
Landlords, agents and businesses in Shalford
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- The product the joint needs
- How many rooms, windows or areas are involved
- The number and length of the joints
- Any working-time requirements on site
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Helping us quote
Before you ask for a quote, have a think about:
- What’s wrong with the joints now
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
Want a quote for fire rated sealant? Please call 0345 464 0079 or email us and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Surface by surface
Flats and HMOs
In occupied buildings, we plan the order of work with you. Access to flats and common areas is agreed in advance so residents know what to expect.
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before the sealant goes in.
Shalford: your questions answered
Can you help a landlord with a rental near Braintree station?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
Do you cover smaller places like Shalford?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How do I get a quote for fire rated sealant in Shalford?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Do you provide details of the products used?
Yes. When the job is done, we give you the locations and products. If you need photos or a set layout, ask when you get a quote.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
Are you fully insured?
Yes, we are fully insured for every job we do.
How long does the job take?
As a guide, most jobs take a few hours for a handful of gaps, and longer for a whole building. Bigger jobs take longer, and we will tell you how long to expect.
Can I use normal mastic around a pipe through a fire wall?
No. A gap that needs fire stopping needs a tested fire-rated product, installed to its details.
Why deal with it now?
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. A proper seal lets the wall do its job again, and the work involved is often modest. Around Shalford, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
Why book with us
- Domestic, commercial and hotel work
- Full insurance on every job
- More than 20 years in sealant work
- Arbo and Everbuild products
Take a look at what affects the cost or our reviews.