Scottish Borders · Scotland
Fire-rated sealant in Romannobridge, Scottish Borders
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Romannobridge and across the Scottish Borders. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Seals cut through by electricians, plumbers or data installers
- Holes left by a change of layout
- Old fire sealant that has split or come away
How to look after the new joints
So the new joints stay in good condition:
- Get damaged fire seals looked at promptly
- Include hidden areas like risers in routine checks
- Take photos of fire stopping before ceilings or boxing go back
- Keep general-purpose foam and caulk away from fire-stopping gaps
Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record so the item can be closed.
How we handle fire rated sealant in Romannobridge
Door frame gaps, linear joints and holes around services all have their own details. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. We are often asked to deal with fire seals that have cracked with movement and gaps around pipes and cables through fire-resisting walls, on pipe & cable gaps, service penetrations and plasterboard & masonry.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Romannobridge (EH46)
- Region
- Scottish Borders
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
What the job involves on each surface
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each.
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
When it isn’t the sealant
We’d rather tell you now than do work that will not last, so these are the limits:
- Walls or floors that weren’t built to resist fire
- Doors that aren’t fire doors in the first place
- Large holes that need a different fire-stopping system
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think.
Surfaces we seal
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
- Linear gaps
- Pipe & cable gaps
- Door frames
FAQs for Romannobridge
Is Romannobridge in your area for fire rated sealant?
Yes, Romannobridge is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear quote.
How do Scotland’s building regulations apply to fire-rated sealant in Romannobridge?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can new sealant go over the old?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Can I choose the sealant colour?
Yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before work begins.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Is there a guarantee?
Yes. Each job is guaranteed for twelve months, wherever you are.
How long does fire rated sealant take?
As a guide, most jobs take from a few hours to a few days, depending on the number of gaps and the access. Larger jobs naturally take longer, and we’ll tell you how long to expect.
The process
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Romannobridge may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Let us know about stairs, lifts or work at height
- Keep pets and children clear of the area while we work
How to get a quote
We quote each job on its own. Simply drop us a line at info@mrmastic.co.uk and describe the job and send photos if you have them.
Advice
Signs you need fire rated sealant in Romannobridge
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
If you can see any of these, it’s time to have the joints looked at:
- Cracked or shrunken fire-rated sealant
- Gaps left after a refit or conversion
- Unsealed gaps where pipes and cables go through a wall
- Sealant items on a fire risk assessment action list
In and around Romannobridge, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
What to look for in a quote
- Which colour the sealant will be
- Are they insured?
- What happens if they find a problem under the old sealant
- How the joint is cleaned and prepared
Fire rated sealant around Romannobridge
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
For jobs in and around Romannobridge, choosing the right material for each joint is as important as a tidy finish.
Romannobridge is about 9 miles south-west of Penicuik, in the Scottish Borders. Anywhere in EH46, we cover fire rated sealant for homes and businesses. Romannobridge is one of 89 places in the Scottish Borders where we work for fire rated sealant. There’s also a page for Edinburgh, roughly 16 miles from Romannobridge.
Here we cover the EH46 postcode area for fire rated sealant. Nearby, we also carry out fire rated sealant in West Linton (2 miles north-west), Blyth Bridge (3 miles south-west), Kirkurd (4 miles south-west), Dolphinton (4 miles west) and Eddleston (5 miles east).
Around Romannobridge
A little further out are Drochil Castle (3.3 miles south) and Castle Craig Hospital (3.4 miles south-west). The countryside around Romannobridge includes Whiteside Hill and Slipperfield Loch.
Places near Romannobridge
What else we do in Romannobridge
Landlord and commercial work in Romannobridge
We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.