Hampshire · England
Rogate Fire Rated Sealant
Fire rated sealant for Rogate, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Unsealed gaps around fire door frames
- New service routes left unsealed after building work
- Open holes round services passing through fire walls
Questions from Rogate
Can you do fire rated sealant in Rogate?
Yes. Our work covers London and the South East, and Rogate is part of that. Just ring 0345 464 0079 or email us with a few details of the job.
Do you cover smaller places like Rogate?
Yes. Rogate is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you quote for more than one area?
Yes, we can. More than one area can go on one quote.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
Can you match the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
Can new sealant go over the old?
No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Will we have a record of what was sealed?
Yes. We record the locations we have sealed and the products used.
Are you insured?
Yes. Full insurance covers our work.
Fire rated sealant in Rogate
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap, and we can record what went where. If you are dealing with linear gaps at the head of walls and door frames with gaps between frame and wall, we can put it right, whatever the surface.
In a village or hamlet like Rogate, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
All our work comes with our one-year guarantee, wherever you are in Hampshire.
- Location
- Rogate (GU31)
- Region
- Hampshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Workplaces and buildings in Rogate
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as The Parish Church of St Bartholomew, older buildings that have had new heating or wiring often have service gaps worth checking. If you let a flat or house near Liss station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Rogate CofE Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Rogate is about 4 miles east of Petersfield, in Hampshire. Across the GU31 area, we cover fire rated sealant for homes and businesses. Rogate is one of 683 towns and villages in Hampshire we cover. You can also see our page for Portsmouth, about 17 miles away.
We cover every part of GU31 for fire rated sealant. Whether your property is on Red House Court, Habin Hill and Parsonage Estate or anywhere close by, our applicators can take on the job. We also cover Borden (1 mile north-east), Trotton Marsh (2 miles north-east), Hill Brow (2 miles north-west), Chithurst (2 miles east) and Durford Wood (2 miles north-west). We also work in nearby towns such as Havant (12 miles south-west), Horndean (10 miles south-west), Alton (11 miles north-west), Waterlooville (12 miles south-west), Petersfield (4 miles west) and Purbrook (12 miles south-west).
Near you in Rogate
The nearest railway station is Liss station, roughly 3.2 miles north-west of the centre. Well-known places in the area include Bear Museum (3.7 miles west) and Petersfield Community Hospital (4 miles west). Open spaces near Rogate include Iping and Stedham Commons and Wheeler's Down.
Looking after it afterwards
So the new joints stay in good condition:
- Include fire stopping when you schedule refits
- Make resealing part of every contractor’s brief
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Flag any open gap you spot round a pipe or cable
Include fire stopping in your regular building checks. Watch for cracking, gaps or seals that have been disturbed and have them put right.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
Honest limits
In fairness, there are a few things sealant will not fix:
- Problems with the door itself rather than the gap around the frame
- A wall that isn’t a fire-resisting element to begin with
- Certifying a building or signing off its fire safety
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before you book.
Where we work in Rogate
- Pipe & cable gaps
- Flats & HMOs
- Linear gaps
- Plasterboard & masonry
- Door frames
- Service penetrations
Why act early in Rogate
For some gaps, sealant is not the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We will say so if a gap needs something other than sealant. In a small place like Rogate, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
Why choose Mr Mastic in Rogate
- Every job guaranteed for a year
- Arbo and Everbuild products
- Full insurance on every job
- An ARBOMaster approved applicator
Take a look at what affects the cost and what customers say.
Also near Rogate
Other services in Rogate
The process
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Rogate, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any leaks or damp you’ve noticed
- On commercial sites, let us know about site rules
Getting a quote
For fire rated sealant in Rogate, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Advice
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Rogate and across Hampshire. We can quote a run of properties together, and we are fully insured for the work.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Quotes for fire rated sealant in Rogate
Call for a quick quote. What matters most is:
- Which sealant suits the joint
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
Doing several joints on one visit normally makes better use of the time than several visits. We’ll send you a clear quote for the lot.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- Pictures of the joints, sent by email
- The problem you’ve noticed
- Whether it has been sealed before
- Where the job is, and your postcode
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.