Kent · England

Fire Rated Sealant in Potter's Forstal

Fire rated sealant in Potter's Forstal from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Open holes round services passing through fire walls
  • Ordinary sealant used where a fire-rated product was needed
  • Joints picked up in a fire-stopping survey

Fire rated sealant near Potter's Forstal

Fire rated sealant in Potter's Forstal, done properly

In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. If you’re dealing with linear gaps at the head of walls and fire stopping disturbed by later work, we can put it right, whatever the surface.

Work in a small place like Potter's Forstal is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.

Whatever the size of the job, you get the same 12-month guarantee in Potter's Forstal and across Kent.

Place
Potter's Forstal (TN27)
Region
Kent
Guarantee
A year, on every job
Quotes
A clear price before work begins
Telephone
0345 464 0079
Page updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

DIY sealant or a professional job?

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

Why act early in Potter's Forstal

Sealant isn’t the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap isn’t suitable for sealant, we will tell you. In a small place like Potter's Forstal, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.

Why us?

  • Old sealant always removed completely
  • A 12-month guarantee on all work
  • Homes, businesses and hotels
  • ARBOMaster approved applicator

Read what affects the cost or what customers say.

Different surfaces, different methods

Flats and HMOs

In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We seal the gaps your assessor has identified, flat by flat if needed.

Door frames

The gap between a door frame and the wall around it needs sealing as well as the door itself. We fill it with a fire-rated product suited to the materials either side.

When something else is needed

We will not take on work that won’t last, so here’s what sealant cannot put right:

  • Doors that aren’t fire doors in the first place
  • Construction that doesn’t provide fire resistance on its own
  • Fire risk assessments, which need a qualified assessor

If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.

Surfaces we seal

  • Service penetrations
  • Plasterboard & masonry
  • Flats & HMOs
  • Linear gaps
  • Door frames
  • Pipe & cable gaps

For landlords and businesses

We work for landlords and letting agents as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.

For anyone letting property in or around Potter's Forstal, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.

Fire rated sealant in Potter's Forstal: local notes

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

Rented homes near Pluckley station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Egerton Church of England Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.

Potter's Forstal is about 8 miles north-west of Ashford, in Kent. Across the TN27 area, our applicators can take on fire rated sealant. Potter's Forstal is one of 922 towns and villages in Kent where we work. You can also see our page for Crawley, roughly 39 miles from Potter's Forstal.

Every address in TN27 is within our area for fire rated sealant, from the main roads to the quietest streets. Nearby, we also carry out fire rated sealant in Egerton Forstal (1 mile south-east), Pembles Cross (1 mile north), Newland Green (1 mile south-east), Mundy Bois (1 mile south-east) and Egerton (1 mile east). Further out, we also cover Maidstone (9 miles north-west), Ashford (8 miles south-east), Sittingbourne (11 miles north), Faversham (12 miles north-east), Kings Hill (14 miles north-west) and Davington (12 miles north-east).

Landmarks near Potter's Forstal

The closest station to Potter's Forstal is Pluckley station, about 2.9 miles south-east. Nearby you’ll also find Coldbridge Castle (0.8 miles north-west).

Map of Potter's Forstal © OpenStreetMap contributors

How we quote for fire rated sealant

We don’t publish a price list. What we look at:

  • How much there is to do
  • Mould in or behind the old joints
  • Access and height
  • The product the joint needs

Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.

What we need to know

Photos by email are helpful but not essential. Try to tell us:

  • The address or postcode of the job
  • The type of property
  • If someone has resealed it before
  • Roughly how big the job is

We quote each job on its own, so the first step is telling us about yours. Just phone 0345 464 0079 or drop us an email with the details and send pictures if you have them.

FAQs for Potter's Forstal

Can you do fire rated sealant in Potter's Forstal?

Yes, Potter's Forstal is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or email us and tell us what needs doing.

I let a flat near Pluckley station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or email us with the details for a clear quote.

How long will you be here?

Most jobs take a few hours for a handful of gaps, and longer for a whole building. Your quote will say how long we expect yours to take.

Is intumescent sealant the same as fire-rated sealant?

Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent ones swell in heat, and they’re one of the options. We use whichever the specification and tested details call for.

Are you ARBOMaster approved?

Yes. We hold ARBOMaster approved applicator status.

Can you quote for more than one area?

Of course. Combining jobs makes good use of the visit.

Where are you based?

Our base is Crawley. Our area covers South East England, London and Scotland.

Do you take on fire stopping in schools and offices?

Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we’ll plan the work to suit.

What happens on the day

Before we leave, we go over the finished joints with you and explain the cure time. The visit itself generally takes from a few hours to a few days, depending on the number of gaps and the access, depending on how much there is to do. Somewhere like Potter's Forstal needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. We plan the order of work and access, floor by floor or flat by flat.
  2. We take out any damaged or unsuitable sealant.
  3. Gaps are cleaned of dust and loose material.
  4. We apply and tool the sealant to the product’s tested detail.
  5. Locations and products are written up and any gaps unsuitable for sealant are flagged.

Getting ready for the visit

  • Clear the area around the work
  • Where the joints are inside, avoid wetting them before we arrive
  • Tell us about any water getting in

How to get a quote

For fire rated sealant in Potter's Forstal, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.

Get a price

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job