Kent · England
Fire Rated Sealant in Leigh Green
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Leigh Green, with a one-year guarantee on every job. Call for a quick quote.
- Gaps where walls meet ceilings or slabs
- Fire stopping disturbed by later work
- Gaps left after a refit or conversion
Fire rated sealant in Leigh Green: local notes
There are hotels and other places to stay in and around Leigh Green. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Appledore (Kent) station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Tenterden Church of England Junior School, service openings in fire-resisting walls need checking after any refurbishment. For buildings such as Parish Church of St Mildred, older buildings that have had new heating or wiring often have service gaps worth checking.
Leigh Green is about 8 miles south-west of Ashford, in Kent. From the centre of Leigh Green to the outskirts, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. We cover 922 towns and villages across Kent, from the larger towns to small villages. We also work in Crawley, about 39 miles from Leigh Green.
All of TN30 is within our area for fire rated sealant. Nearby, we also carry out fire rated sealant in Reading Street (2 miles south-east), Brook Street (2 miles east), Stone Corner (3 miles south), Woodchurch (3 miles east) and Brattle (3 miles east). Within a short drive, we also cover Ashford (8 miles north-east), Park Wood (14 miles north-west), Kennington (10 miles north-east), New Romney (11 miles south-east), Staplehurst (10 miles north-west) and Stanhope (8 miles north-east).
Landmarks near Leigh Green
Locally, jobs take us to homes and businesses close to Turners Field and Homewood School and Sixth Form Centre. Leigh Green’s nearest station is Appledore (Kent) station, about 5 miles south-east. Nearby you’ll also find Benenden Hospital (4.5 miles west) and Tenterden and District Museum (1.3 miles west).
Fire rated sealant in Leigh Green
We don’t assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on door frames, service penetrations and plasterboard & masonry, and common reasons people get in touch are unsealed gaps where pipes and cables go through a wall and joints picked up in a fire-stopping survey.
If you have holiday lets, a converted barn used for business or a community building near Leigh Green, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Big or small, it’s backed by our 12-month guarantee.
- Location
- Leigh Green (TN30)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Common questions in Leigh Green
Do you take on hotel work around Leigh Green?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Can you help a landlord with a rental near Appledore (Kent) station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
What do you put in the joint?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
How much does fire rated sealant cost in Leigh Green?
Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or drop us an email and let us know what needs doing and where.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures.
Can you do several jobs on one visit?
Yes, we can. More than one area can be quoted together.
Do you seal gaps around fire door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself, and we’ll mention anything we notice about the door.
Can you tell me how many minutes the seal will last?
We do not issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer; we install to those details and record what we did.
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
Keeping the joints in good condition
So the new joints stay in good condition:
- Flag any open gap you spot round a pipe or cable
- Ask every contractor to reseal any fire stopping they disturb
- Check whether a sealant can be painted before decorating over it
- Look in service cupboards and ceiling voids from time to time
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
What the job involves on each surface
Plasterboard walls
We check that the board around the gap is sound. Loose material is removed so the sealant has a firm edge.
Flats and HMOs
Conversions generally leave a mix of old and new service holes. We seal the ones on your specification with a tested product and the locations noted.
How we quote for fire rated sealant
We quote each job individually. This is what makes a difference:
- The product the joint needs
- Whether the work is at height
- How many rooms, windows or areas are involved
- When we can work, for business premises
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- What’s wrong with the joints now
- How we’d reach the joints
- The address or postcode of the job
- The type of property
Every job is quoted individually, so start by telling us what you need. Simply ring 0345 464 0079 or email us and describe the job.
Why it’s worth doing now in Leigh Green
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now means you can show the action was taken. Around Leigh Green, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Why us?
- Every job guaranteed for a year
- Anti-fungal sanitary silicone in wet areas
- We never seal over old sealant
- More than 20 years in sealant work
See our cost guide or our reviews.
Nearby places to Leigh Green
What else we do in Leigh Green
When something else is needed
We’d rather tell you now than do work that will not last, so these are the limits:
- Big openings where sealant alone isn’t the tested solution
- Certifying a building or signing off its fire safety
- Problems with the door itself rather than the gap around the frame
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before you book.
Surfaces we seal
- Pipe & cable gaps
- Plasterboard & masonry
- Door frames
- Service penetrations
- Flats & HMOs
- Linear gaps
How the visit works
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Leigh Green, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work before giving you a price.