Kent · England
Lamberhurst Fire Rated Sealant
Fire rated sealant for Lamberhurst and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Gaps around pipes and cables through fire-resisting walls
- Gaps filled with a product that isn’t fire-rated
- Holes left by a change of layout
Fire rated sealant for homes and businesses in Lamberhurst
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That is the part we focus on, one gap at a time. We work on plasterboard & masonry, door frames and linear gaps, and common reasons people get in touch are old fire sealant that has split or come away and gaps left after a refit or conversion.
If you have holiday lets, a converted barn used for business or a community building near Lamberhurst, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Lamberhurst (TN3)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Fire rated sealant in Lamberhurst: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For landlords with property near Wadhurst station, any gap left by new services in shared walls should be closed with a fire-rated product.
Lamberhurst is about 6 miles south-east of Royal Tunbridge Wells, in Kent. Anywhere in TN3, we can carry out fire rated sealant at your property. 922 places in Kent are on our list, large and small. Our Crawley page covers work nearby (25 miles or so).
We cover every part of the TN3 postcode area for fire rated sealant and the streets around it. You’ll find streets such as High Street, Church Road and Clivedon Court, and we cover them all. Other places close to Lamberhurst include Lamberhurst Quarter (2 miles north-west), Key's Green (3 miles north-west), Petteridge (3 miles north), Brenchley (4 miles north) and Matfield (4 miles north). We also work in nearby towns such as Maidstone (13 miles north-east), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (6 miles north-west), Tonbridge (8 miles north-west), Kings Hill (12 miles north) and Foley Park (14 miles north-east).
Around Lamberhurst
Typical jobs here are in homes near Horse And Groom Public House and the streets around them. The nearest railway station is Wadhurst station, roughly 3.9 miles south-west. Other landmarks nearby include Ticehurst House Hospital (3.5 miles south) and Old Scotney Castle (1 mile south-east). For a walk, there’s Bewl Water.
When to call us in Lamberhurst
Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole they leave does not always get resealed.
These are the problems we’re asked about most:
- Ordinary sealant used where a fire-rated product was needed
- Door frames with gaps between frame and wall
- Gaps flagged on a fire risk assessment
- Fire stopping disturbed by later work
For buildings such as Church of St Mary, older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- Whether the sealant suits the joint
- What the cure time is
- Is the old sealant removed completely?
- How hidden problems are handled
Landlords, agents and businesses in Lamberhurst
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
How the job changes by surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. The sealant is chosen for what passes through and how wide the gap is.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We seal them along their full length leaving no stretch unsealed.
Why act early in Lamberhurst
A quick fill with any sealant to hand isn’t fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. In a small place like Lamberhurst, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
Why us?
- More than 20 years in sealant work
- Experience in homes, commercial sites and hotels
- 12-month guarantee on every job
- Any old sealant cut out fully, not covered over
Read our cost guide or customer reviews.
How the visit works
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take anything from a few hours to several days, depending on how many gaps there are. In a small place like Lamberhurst, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Before we arrive
- For business premises, tell us about site rules or sign-in
- Let us know about earlier repairs to the joints
- Keep pets and children clear of the area while we work
Ask for a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Advice
Nearby places to Lamberhurst
Also in Lamberhurst
Honest limits
New sealant cannot fix everything, and we will tell you before any work starts. It will not solve:
- Openings too large for sealant, which need batts, boards or another system
- Sign-off of the building, which sits with building control or your assessor
- Fire risk assessments, which need a qualified assessor
If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Door frames
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Service penetrations
Your questions about fire rated sealant in Lamberhurst
Do you cover Lamberhurst for fire rated sealant?
Yes, Lamberhurst is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Do you cover smaller places like Lamberhurst?
Yes. Lamberhurst is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Will we have a record of what was sealed?
Yes. You get a list of where we worked and what we used to keep with your fire safety documents.
Are you insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.
Do you certify the fire stopping?
We don’t certify fire stopping or quote ratings. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
What should I tell you?
A short description and the location, plus photos if you have them. If we need more, we will ask.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Aftercare tips
A little care helps the new joints last. We recommend:
- Store the list of sealed gaps with your building paperwork
- Ask which product was used before you paint
- Take photos of fire stopping before ceilings or boxing go back
- Ask every contractor to reseal any fire stopping they disturb
File the record of locations and products with your fire safety paperwork. It helps whoever checks the building next.
Open gaps don’t only matter in a fire: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.