Essex · England
Fire Rated Sealant in Hullbridge
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Hullbridge, with a 12-month guarantee on every job. Ask us for a quote.
- Linear gaps at the head of walls
- New service routes left unsealed after building work
- Ordinary sealant used where a fire-rated product was needed
What happens on the day
The work is kept neat and contained to the area we are working on, so you can get on with your day. Expect the work to take a few hours for a handful of gaps, and longer for a whole building, and we explain the cure time before we leave. Parking around Hullbridge is usually easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
- Mention any leaks or damp you’ve noticed
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or drop us an email.
Read more
Fire rated sealant in Hullbridge, done properly
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. It gives you a list to keep with the building’s fire safety documents. If you have gaps filled with a product that isn’t fire-rated and gaps where walls meet ceilings or slabs, we can put it right, whatever the surface.
In a smaller place like Hullbridge, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. Each needs the same care with its sealant as any larger building.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.

- Where
- Hullbridge (SS5)
- Wider area
- Essex
- Cover
- A year, on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Also near Hullbridge
Other services in Hullbridge
Landlords, agents and businesses in Hullbridge
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
When something else is needed
A few problems are outside what sealant work can do:
- Walls or floors that weren’t built to resist fire
- Sign-off of the building, which sits with building control or your assessor
- Big openings where sealant alone is not the tested solution
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
Where we work in Hullbridge
- Door frames
- Flats & HMOs
- Plasterboard & masonry
- Linear gaps
- Service penetrations
- Pipe & cable gaps
Fire rated sealant in Hullbridge: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a building such as Riverside Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. Rented homes near South Woodham Ferrers station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Hullbridge is about 2 miles north of Rayleigh, in Essex. Jobs in Hullbridge get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 644 places in Essex are on our list, large and small. You can also see our page for Chelmsford, about 10 miles away.
Postcode districts we cover here for fire rated sealant: SS5. Whether your property is on Ferry Road, Ambleside Gardens and Mayfield Avenue or a nearby road, we can help. Neighbouring places we cover for fire rated sealant include Brandy Hole (1 mile north-east), South Woodham Ferrers (1 mile north), Hockley (2 miles south-east), South Fambridge (3 miles east) and North Fambridge (3 miles north-east). Within a short drive, we also cover Chelmsford (10 miles north-west), Basildon (8 miles south-west), Brentwood (13 miles west), Maldon (8 miles north), Canvey Island (7 miles south) and Billericay (8 miles west).
Local landmarks in Hullbridge
We work in homes and buildings around Kendal Park and William de Ferrers School and the streets around them. Hullbridge’s nearest station is South Woodham Ferrers station, roughly 1.8 miles north of the centre. Well-known places in the area include Battlesbridge Motorcycle Museum (1.8 miles west) and Chartwell Private Hospital (5.3 miles south). Open spaces near Hullbridge include Woodham Fen.
Your questions about fire rated sealant in Hullbridge
Can you do fire rated sealant in Hullbridge?
Yes. Our work covers London and the South East, and Hullbridge is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we will send you a clear quote.
Do you cover smaller places like Hullbridge?
Yes. Hullbridge is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
What does fire rated sealant cost?
Every job is different, so each one gets its own quote. To get one, call 0345 464 0079 or drop us an email and tell us what needs doing and where.
What’s the difference between intumescent and fire-rated sealant?
Intumescent describes a material that swells in heat. Many fire-rated sealants work this way, but not all, and the choice depends on the gap.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
Can I do it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Can you fill the gap behind a fire door frame?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame, and we’ll mention anything we notice about the door.
Do you need fire rated sealant in Hullbridge?
Lots of unsealed gaps appear long after the building was completed. New cables, pipes and data runs go through walls and ceilings and the hole they leave doesn’t always get resealed.
These are the problems we are asked about most:
- Gaps filled with a product that isn’t fire-rated
- Linear gaps at the head of walls
- Gaps around pipes and cables through fire-resisting walls
- Holes left by a change of layout
For buildings such as St Thomas' Church, gaps around pipes and cables are worth checking after any building work there.
Comparing quotes
- Whether all the old sealant comes out first
- How much experience the applicator has
- The length of the guarantee
- Which sealant they’ll use, and why
Why act early in Hullbridge
Paying for fire stopping that has to be redone is a false economy. Work that doesn’t follow the tested detail may have to come out again when the building is next checked. Homes in smaller places like Hullbridge can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
Why Hullbridge customers choose us
- Sanitary silicone with an anti-fungal additive in wet areas
- 20+ years of sealant experience
- Neat joints and a tidy finish
- Quality sealants from Arbo and Everbuild
Take a look at what affects the cost and our reviews.
Looking after it afterwards
Looking after new joints is easy:
- Ask which product was used before you paint
- Keep pictures of seals that will be hidden
- Flag any open gap you spot round a pipe or cable
- Never patch a fire seal with standard sealant
Include fire stopping in your regular building checks. Watch for cracking, gaps or seals that have been disturbed and have them put right.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is generally a straightforward job.
