Essex · England
Fire Rated Sealant in Horsley Cross
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Horsley Cross, backed by a one-year guarantee. Call for a quick quote.
- Holes left by a change of layout
- Standard silicone or caulk in a fire-stopping gap
- Sealant items on a fire risk assessment action list
Why act early in Horsley Cross
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own and needn’t wait for anything else. Around Horsley Cross, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Why us?
- One-year guarantee on every job
- We never seal over old sealant
- Approved under the ARBOMaster scheme
- Rated 4.9 stars on Google
See what affects the cost and what customers say.
Fire rated sealant for homes and businesses in Horsley Cross
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. That record is useful for your files and for whoever looks at the building next. We work on service penetrations, pipe & cable gaps and door frames, and common reasons people get in touch are ordinary sealant used where a fire-rated product was needed and seals cut through by electricians, plumbers or data installers.
Somewhere as small as Horsley Cross, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
There’s a 12-month guarantee on every job.
- Where
- Horsley Cross (CO11)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Aftercare tips
So the new joints stay in good condition:
- File the fire-stopping record where your assessor can find it
- Include fire stopping when you schedule refits
- Ask every contractor to reseal any fire stopping they disturb
- Never patch a fire seal with standard sealant
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record.
Fire rated sealant around Horsley Cross
For seaside hotels, guest houses and holiday lets around Horsley Cross, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Around Horsley Cross, as everywhere, fire rated sealant is only as good as the preparation behind it. For landlords with property near Mistley station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Horsley Cross is about 8 miles north of Clacton-on-Sea, in Essex. Every kind of property in Horsley Cross can book us for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Horsley Cross is one of 644 places in Essex we cover for fire rated sealant. We also work in Chelmsford, about 28 miles from Horsley Cross.
Every address in CO11 is within our area for fire rated sealant, from the main roads to the quietest streets. We also cover Horsleycross Street (1 mile north), Little Bromley (2 miles north-west), Mistley (3 miles north), Manningtree (3 miles north) and Lawford (3 miles north-west). We also work in nearby towns such as Colchester (8 miles west), Clacton-on-Sea (8 miles south), Harwich (8 miles east), Camulodunum (9 miles west), Greenstead (6 miles west) and Wivenhoe (6 miles south-west).
Near you in Horsley Cross
Typical jobs here are in homes near The Cross Inn. For rail, the closest station is Mistley station, roughly 2.7 miles north of the centre. Open spaces near Horsley Cross include Wrabness Nature Reserve.
What happens on the day
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a handful of gaps, and longer for a whole building and we leave things clean and tidy. Somewhere like Horsley Cross needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
How to prepare
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
For fire rated sealant in Horsley Cross, call 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Read more
How the job changes by surface
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the seal has something sound to bond to.
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
What sealant work cannot fix
New sealant can’t fix everything, and we’ll tell you before work begins. Sealant will not put right:
- A wall that isn’t a fire-resisting element to begin with
- Openings too large for sealant, which need batts, boards or another system
- Fire risk assessments, which need a qualified assessor
If in doubt, call 0345 464 0079 or send us an email and we will say what we think before booking.
Surfaces we seal
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Service penetrations
- Plasterboard & masonry
Horsley Cross questions
Is Horsley Cross in your area for fire rated sealant?
Yes, Horsley Cross is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or email us and let us know what needs doing.
Do you cover smaller places like Horsley Cross?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Intumescent sealants are a type of fire-rated sealant.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Can you seal over the old sealant?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
How long will you be here?
That depends on how much there is to do, but most jobs take anything from a few hours to several days, depending on how many gaps there are. We will give you a better idea when we quote.
Do you offer different sealant colours?
We’ll suggest a colour to suit the surroundings. The product needed can limit the range.
What affects the quote in Horsley Cross
We don’t publish a price list, because jobs vary so much. What we look at:
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
- The type of sealant required
- Whether the work is at height
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and give you a clear quote before work begins.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- How many joints, rooms or windows are involved
- Photos by email, if that is easy
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or send us an email.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.