Oxfordshire · England
Fire-rated sealant in Fringford, Oxfordshire
Fire-stopping gaps in Fringford need attention? We cut out the old, prepare the joints and apply the right sealant.
- Holes left by a change of layout
- Open gaps behind door architraves
- Gaps where walls meet ceilings or slabs
How the visit works
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes from a few hours to a few days, depending on the number of gaps and the access from start to finish. In a small place like Fringford, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us if parking is tricky
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you’re ready, call 0345 464 0079 or drop us an email.
Advice
Fire rated sealant in Fringford, done properly
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That detail is what we take care over. We work on service penetrations, pipe & cable gaps and flats & HMOs, and the jobs we see most are damaged fire sealant left by other trades and gaps flagged on a fire risk assessment.
If you have holiday lets, a converted barn used for business or a community building near Fringford, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Whatever the size of the job, you get the same one-year guarantee in Fringford and across Oxfordshire.
- Location
- Fringford (OX27)
- Wider area
- Oxfordshire
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Fire rated sealant around Fringford
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
If you look after a church, hall or community building such as Church of St Michael and All Angels, older buildings that have had new heating or wiring often have service gaps worth checking. Letting a property close to Bicester North station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Managing a site like Fringford Church of England Primary School? Then service openings in fire-resisting walls need checking after any refurbishment.
Fringford is about 4 miles north of Bicester, in Oxfordshire. Whether you are in the middle of Fringford or further out, fire rated sealant is available for homes and businesses alike. Across Oxfordshire, we cover 443 places, and Fringford is one of them. For nearby work, see our Oxford page (15 miles or so).
Here we cover the OX27 postcode area for fire rated sealant. If you need fire rated sealant at a property on Main Street, Crosslands and Church Close or a nearby road, we can help. Other places close to Fringford include Hethe (1 mile north-west), Stratton Audley (2 miles south), Hardwick (2 miles west), Stoke Lyne (2 miles west) and Caversfield (3 miles south-west). Further out, we also cover Oxford (15 miles south), Banbury (12 miles north-west), Bicester (4 miles south), Kidlington (12 miles south-west), Headington Quarry (14 miles south) and Bure Park (4 miles south-west).
Local landmarks in Fringford
Around Fringford, our work takes us to homes and buildings near Whitmore Arms Public House. For rail, the closest station is Bicester North station, about 3.8 miles south. Nearby you’ll also find Beaumont Castle (3.2 miles north) and Bicester Community Hospital (4.4 miles south).
Questions from Fringford
Do you cover Fringford for fire rated sealant?
Yes. We work across London and the South East, and Fringford is part of that. You can call 0345 464 0079 or email us and let us know what needs doing, and we will give you a clear quote.
Do you cover smaller places like Fringford?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Is intumescent sealant the same as fire-rated sealant?
Intumescent means it swells when heated to help seal the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Will we have a record of what was sealed?
Yes. Every gap we seal is listed with the product used.
Can ordinary silicone be used in a fire-stopping gap?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. We cut it out and reseal with a fire-rated product.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
What happens if it’s left?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own and needn’t wait for anything else. Around Fringford, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
Why Fringford customers choose us
- Old sealant always removed completely
- Trusted Arbo and Everbuild sealants
- ARBOMaster approved applicator
- More than 20 years in sealant work
Surface by surface
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point against the product’s tested range.
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Take pictures of fire stopping before ceilings or boxing go back
- Check whether a sealant can be painted before decorating over it
- Check risers, ceiling voids and cupboards during building checks
Include fire stopping in your regular building checks. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Landlords, agents and businesses in Fringford
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Towns and villages near Fringford
Other services in Fringford
Honest limits
Before booking, it’s worth knowing the limits too:
- Openings too large for sealant, which need batts, boards or another system
- A wall that isn’t a fire-resisting element to begin with
- Fire risk assessments, which need a qualified assessor
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before you book.
Joints and surfaces we work on
- Pipe & cable gaps
- Flats & HMOs
- Plasterboard & masonry
- Linear gaps
- Door frames
- Service penetrations