Essex · England
Elmstead Market Fire Rated Sealant
Fire rated sealant in Elmstead Market from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Gaps filled with a product that is not fire-rated
- Damaged fire sealant left by other trades
- Unsealed gaps where pipes and cables go through a wall
How we handle fire rated sealant in Elmstead Market
Door frame gaps, linear joints and holes around services all have their own details. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. We work on linear gaps, service penetrations and pipe & cable gaps, and common reasons people get in touch are cracked or shrunken fire-rated sealant and open holes round services passing through fire walls.
For a pub, café, guest house or shop in or near Elmstead Market, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or email us.
- Location
- Elmstead Market (CO7)
- Region
- Essex
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
Housing providers, facilities teams and property managers book us too in Elmstead Market and across Essex. We can quote a run of properties together, and we are fully insured.
We work for letting agents and landlords as well as householders. Sealant work between tenants keeps a property looking cared for.
How the job changes by surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement.
Masonry and concrete
Preparation counts on brick, block and concrete. We brush and vacuum the gap and use backing where the detail needs it before the sealant goes in.
What we do, step by step
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. It usually takes a few hours for a handful of gaps, and longer for a whole building. A visit to Elmstead Market is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Before we arrive
- Clear items away from the joints we’re working on
- Mention any tricky access
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
We quote each job on its own, so the first step is telling us about yours. Just phone 0345 464 0079 or drop us an email with the details.
Read more
Common questions in Elmstead Market
Will you come out to Elmstead Market?
Yes, Elmstead Market is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Alresford station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
What information do you need?
Tell us what needs doing and where, plus pictures if you have them. If we need more, we’ll ask.
Do you work in flats, HMOs and commercial buildings?
Yes. Occupied flats, HMOs, offices and schools are all fine. Early starts or out-of-hours work can be arranged where it’s needed.
Do you carry out fire risk assessments?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
Do you certify the fire stopping?
We do not issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.
Can you fill the gap behind a fire door frame?
Yes, where the gap suits a sealant detail. Our work is the gap around the frame, and we’ll mention anything we notice about the door.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Keep the record of products and locations with your fire safety documents
- Ask every contractor to reseal any fire stopping they disturb
- Never patch a fire seal with standard sealant
- Plan fire stopping into any work that goes through walls or floors
Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
Leave it or put it right?
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing when the building is next checked. Homes in smaller places like Elmstead Market can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Combining jobs into one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
What you get with us
- Tidy, careful work
- A 12-month guarantee on all work
- Domestic, commercial and hotel work
- Rated 4.9 stars on Google
See how sealant jobs are priced and our reviews.
What we are called out for in Elmstead Market
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
These are the problems we are asked about most:
- Sealant items on a fire risk assessment action list
- Damaged fire sealant left by other trades
- Holes left by a change of layout
- Open gaps behind door architraves
Rented homes near Alresford station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What your quote should include
- How the colour is chosen
- What preparation is included
- When the joint can take water or movement
- Is the old sealant removed completely?
Commercial buildings in Elmstead Market
If you run a hotel, guest house or holiday let in a coastal place like Elmstead Market, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
For site and facilities teams at buildings such as Elmstead Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. Community buildings like Church of St Anne and St Lawrence are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Elmstead Market is about 4 miles east of Colchester, in Essex. Jobs in Elmstead Market get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 644 places across Essex, large and small. There’s also a page for Chelmsford, about 24 miles away.
Jobs for fire rated sealant in CO7 is quoted and booked the same way as anywhere else. Whether your property is on Church Road, Chapel Lane and School Road or a nearby road, our applicators can take on the job. Other places close to Elmstead Market include Elmstead (1 mile south-west), Wivenhoe Cross (2 miles south-west), Crockleford Heath (2 miles north-west), Alresford (2 miles south) and Wivenhoe (2 miles south-west). We also work in nearby towns such as Colchester (4 miles west), Clacton-on-Sea (9 miles south-east), Harwich (12 miles east), Camulodunum (5 miles west), Greenstead (3 miles west) and Tiptree (11 miles south-west).
Around Elmstead Market
We work in homes and buildings around Wivenhoe Park and Colchester Academy and the streets around them. The closest station to Elmstead Market is Alresford station, roughly 1.9 miles south. Well-known places in the area include Essex County Hospital (4.5 miles west) and Wivenhoe Chapel Museum (1.8 miles south-west). Green spaces nearby include Cockaynes Wood.
Places near Elmstead Market
Other services in Elmstead Market
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.