Kent · England
Fire-rated sealant in Eccles, Kent
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Eccles, backed by a one-year guarantee. Call for a quick quote.
- Ordinary sealant used where a fire-rated product was needed
- Gaps left after a refit or conversion
- Unsealed gaps where pipes and cables go through a wall
Fire rated sealant in Eccles
Ordinary silicone or decorators’ caulk in a fire-stopping gap is not a fire-rated seal. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. Common call-outs are for damaged fire sealant left by other trades and door frames with gaps between frame and wall, on door frames, linear gaps and pipe & cable gaps.
In a village or hamlet like Eccles, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Eccles (ME20)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Eccles: your questions answered
Can you do fire rated sealant in Eccles?
Yes, Eccles is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we’ll send you a clear quote.
Do you work for landlords with property near New Hythe station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.
Can you tell me which gaps need fire stopping?
No. Your fire risk assessor, designer or building control decides that. Our job is applying the sealant to their specification.
Can you match the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
What information do you need?
Let us know what needs doing and where. We’ll ask anything else we need to know.
Are you insured?
Yes, we’re fully insured.
Towns and villages near Eccles
What else we do in Eccles
What we can’t put right
To be straight with you, some problems need a different trade:
- A wall that is not a fire-resisting element to begin with
- Big openings where sealant alone isn’t the tested solution
- Assessing a building’s fire safety
If you’re not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Service penetrations
- Linear gaps
- Plasterboard & masonry
Looking after it afterwards
Aftercare is simple:
- Photograph sealed gaps before they’re covered up
- Include fire stopping when you schedule refits
- File the fire-stopping record where your assessor can find it
- Never patch a fire seal with standard sealant
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and get them seen to.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Fire rated sealant in Eccles: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
If you look after a church, hall or community building such as Church of St Peter and St Paul, gaps around pipes and cables are worth checking after any building work there. For landlords with property near New Hythe station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Eccles is about 3 miles south-west of Chatham, in Kent. For fire rated sealant in and around Eccles, please call 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Kent. Our area takes in 922 places across Kent. You can also see our page for London, about 28 miles away.
Work in ME20 works the same way as everywhere else we cover. That includes homes and businesses on Bull Lane, Springett Close and Jenner Way and the roads around them. We also cover Burham (1 mile north), Pratling Street (1 mile south-east), Forstal (1 mile south-east), New Hythe (1 mile south-west) and Scarborough (2 miles north). Within a short drive, we also cover Maidstone (4 miles south-east), Sittingbourne (11 miles east), Dartford (14 miles north-west), Sevenoaks (13 miles west), Gravesend (9 miles north-west) and Tonbridge (12 miles south-west).
Around Eccles
Typical jobs here are in homes near Burham Marsh, The Red Bull Public House and Aylesford School and the streets around them. Eccles’s nearest station is New Hythe station, roughly 1.1 miles south-west of the centre. Other landmarks nearby include Fremlin Walk (3.5 miles south-east) and Allington Castle (2.2 miles south-east). The countryside around Eccles includes Burham Down and Blue Bell Hill.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Why it’s worth doing now in Eccles
Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Around Eccles, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or send us an email and we will talk you through it.
Why choose Mr Mastic in Eccles
- 4.9 on Google from 180+ five-star reviews
- A 12-month guarantee on all work
- ARBOMaster approved applicator
- Over 20 years’ experience
Surface by surface
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We fill it with a fire-rated product suited to the materials either side.
Masonry and concrete
Preparation counts on brick, block and concrete. We brush and vacuum the gap and use backing where the detail needs it before applying the sealant.
When to call us in Eccles
In some buildings the gap was filled with the wrong thing in the first place: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It looks sealed, but it is not fire-rated.
Any of these means the joints need attention:
- Fire seals that have cracked with movement
- Fire stopping disturbed by later work
- Standard silicone or caulk in a fire-stopping gap
- Gaps flagged on a fire risk assessment
If you look after a building such as St Mark's Church of England Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Questions to ask before you book
- Whether they seal over old material or remove it
- How hidden problems are handled
- How the colour is chosen
- What the cure time is
The process
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on how much there is to do. For a village or hamlet like Eccles, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
Preparing for the visit
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.