West Berkshire · England
Fire-rated sealant in Earlstone Common, West Berkshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Earlstone Common. Fully insured, ARBOMaster approved and guaranteed for a year.
- Door frames with gaps between frame and wall
- New service routes left unsealed after building work
- Gaps around pipes and cables through fire-resisting walls
Fire rated sealant in Earlstone Common
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. We work on linear gaps, pipe & cable gaps and plasterboard & masonry, and common reasons people get in touch are old fire sealant that has split or come away and fire stopping disturbed by later work.
If you have holiday lets, a converted barn used for business or a community building near Earlstone Common, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
All our work is covered by a 12-month guarantee.
- Place
- Earlstone Common (RG20)
- Region
- West Berkshire
- Guarantee
- One year on every job
- Quotes
- A clear price before work begins
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Places near Earlstone Common
Other services in Earlstone Common
How the visit works
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It usually takes a few hours for a handful of gaps, and longer for a whole building. Somewhere as small as Earlstone Common, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Finally, we list where we worked and what we used, for your records.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Move anything stored near the joints
- Let us know about parking restrictions
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Advice
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Make resealing part of every contractor’s brief
- Keep pictures of seals that will be hidden
- Include hidden areas like risers in routine checks
- Plan fire stopping into any work that goes through walls or floors
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the list grows.
When to call us in Earlstone Common
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it is not installed as tested. We see plenty of fire stopping that was hurried, especially where it was squeezed in at the end of a project.
Most people get in touch when they notice one of these:
- Joints picked up in a fire-stopping survey
- Open holes round services passing through fire walls
- Gaps filled with a product that is not fire-rated
- Cracked or shrunken fire-rated sealant
Community buildings like Church of the Ascension are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- How the surfaces are prepared before sealing
- Is the old sealant removed completely?
- The length of the guarantee
- Who does the work, and how experienced they are
Surface by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We seal them along their full length leaving no stretch unsealed.
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.
Landlords, agents and businesses in Earlstone Common
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
When it isn’t the sealant
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- A wall that isn’t a fire-resisting element to begin with
- Issuing a fire rating or certificate for a building
- Assessing a building’s fire safety
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly before booking.
Where we work in Earlstone Common
- Linear gaps
- Door frames
- Flats & HMOs
- Plasterboard & masonry
- Service penetrations
- Pipe & cable gaps
FAQs for Earlstone Common
Can you do fire rated sealant in Earlstone Common?
Yes, Earlstone Common is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Do you cover smaller places like Earlstone Common?
Yes. Earlstone Common is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is there a guarantee?
Yes. Each job is guaranteed for twelve months.
How long does fire rated sealant take?
It depends on the size of the job, but as a guide it takes a few hours for a handful of gaps, and longer for a whole building. We will tell you when we quote.
What do you need from me for a quote?
A short description and the location. We will ask anything else we need to know.
Will you leave a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Fire rated sealant around Earlstone Common
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Newbury station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. Schools such as The Clere School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Earlstone Common is about 3 miles south of Newbury, in West Berkshire. Earlstone Common gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Earlstone Common is one of 155 places in West Berkshire we cover for fire rated sealant. Reading is on our list too, around 16 miles away.
Here we cover the RG20 postcode area for fire rated sealant. Nearby, we also carry out fire rated sealant in Burghclere Common (1 mile north), Burghclere (1 mile south-west), Newtown Common (1 mile north), Wash Water (2 miles north-west) and Sandleford (2 miles north). Further out, we also cover Newbury (3 miles north), Thatcham (4 miles north-east), Burghfield Common (12 miles east), Speenhamland (4 miles north), Hungerford (9 miles north-west) and Spencers Wood (15 miles east).
Around Earlstone Common
Locally, jobs take us to homes and businesses close to Burghclere Primary School, Horris Hill School and Sandleford Priory, among other places. Earlstone Common’s nearest station is Newbury station, roughly 3 miles north of the centre. Well-known places in the area include Old Chapel Textile Centre (2.2 miles north-east) and West Berkshire Community Hospital (3.8 miles north). Open spaces near Earlstone Common include Beacon Hill and Audrey's Meadow.