Oxfordshire · England

Crowell Hill Fire Rated Sealant

Specialist fire rated sealant for Crowell Hill: the right sealant, proper preparation and a neat finish. Call for a quick quote.

  • Joints picked up in a fire-stopping survey
  • Fire stopping disturbed by later work
  • Fire seals that have cracked with movement

Fire rated sealant for Crowell Hill homes and businesses

Signs you need fire rated sealant in Crowell Hill

Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.

If you can see any of these, it’s time to have the joints looked at:

  • Old fire sealant that has split or come away
  • Ordinary sealant used where a fire-rated product was needed
  • Unsealed gaps around fire door frames
  • Holes left by a change of layout

For buildings such as Church of the Nativity of the Blessed Virgin Mary, service openings in its walls need the right fire-rated sealant, as in any building.

What to look for in a quote

  • What happens if they find a problem under the old sealant
  • Whether the sealant suits the joint
  • Whether they seal over old material or remove it
  • How the surfaces are prepared before sealing

Choosing a sealant specialist

Fire rated sealant in Crowell Hill, done properly

Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment. Send us the list or the survey and we will quote for the fire-rated sealant work on it. We work on plasterboard & masonry, door frames and service penetrations, and people most often call us about fire seals that have cracked with movement and joints picked up in a fire-stopping survey.

For holiday lets, converted business premises or a community building near Crowell Hill, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.

Where
Crowell Hill (OX39)
Region
Oxfordshire
Cover
One year on every job
Quotes
Quoted before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

Fire rated sealant in Crowell Hill: local notes

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.

Rented homes near Saunderton station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.

Crowell Hill is about 5 miles south-east of Thame, in Oxfordshire. Wherever you are in the OX39 postcode area, we cover fire rated sealant for homes and businesses. Across Oxfordshire, we cover 443 places, Crowell Hill among them. For nearby work, see our Oxford page.

We work across OX39 for fire rated sealant and the streets around it. Close by, we work in Crowell (1 mile north-west), Kingston Blount (1 mile north-west), Oakley (1 mile north-west), Aston Rowant (2 miles west) and Lewknor (3 miles west). Larger places within reach include Oxford (15 miles west), Didcot (15 miles west), Thame (5 miles north-west), Henley-on-Thames (10 miles south), Benson (10 miles south-west) and Headington Quarry (14 miles north-west).

Near you in Crowell Hill

In Crowell Hill, that means homes and buildings near Sir Charles Napier Inn and the streets around them. The nearest railway station is Saunderton station, roughly 3.4 miles east. Other landmarks nearby include Thame Community Hospital (5.2 miles north-west). Green spaces nearby include Oakley Hill nature reserve and Bald Hill.

Map of Crowell Hill © OpenStreetMap contributors

When something else is needed

A few problems are outside what sealant work can do:

  • Construction that does not provide fire resistance on its own
  • Big openings where sealant alone isn’t the tested solution
  • Sign-off of the building, which sits with building control or your assessor

If in doubt, ring 0345 464 0079 or email us and we will say what we think.

Surfaces we seal

  • Service penetrations
  • Pipe & cable gaps
  • Door frames
  • Plasterboard & masonry
  • Flats & HMOs
  • Linear gaps

Landlords, agents and businesses in Crowell Hill

Housing providers, facilities teams and property managers book us too in Crowell Hill and across Oxfordshire. We can quote a run of properties together, and we are fully insured for the work.

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.

How to look after the new joints

A little care helps the new joints last. We recommend:

  • Get damaged fire seals looked at promptly
  • File the fire-stopping record where your assessor can find it
  • Allow for resealing whenever new services are run
  • Keep general-purpose foam and caulk away from fire-stopping gaps

Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.

It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the list grows.

Why it’s worth doing now in Crowell Hill

Paying for fire stopping that has to be redone is a false economy. Work that does not follow the tested detail may have to come out again when the building is next checked. Around Crowell Hill, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.

What you get with us

  • Domestic, commercial and hotel work
  • Sanitary silicone with an anti-fungal additive in wet areas
  • Every job guaranteed for a year
  • Full insurance on every job

Take a look at our cost guide or customer reviews.

How the visit works

Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and clear up. It normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Crowell Hill, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We start with the survey or action list, checking the size and surfaces of every gap.
  2. We remove any old or unsuitable filler and clean the gap.
  3. We put in whatever backing or fill the product detail specifies.
  4. Fire-rated or intumescent sealant is applied to the right depth and tooled.
  5. We record the locations and products used for your records.

How to prepare

  • Try not to wet indoor joints just before the visit
  • Let us know about stairs, lifts or work at height
  • Clear items away from the joints we’re working on

How to get a quote

Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work and give you a clear quote.

Get a price

Read more

What affects the cost of fire rated sealant

Some jobs are bigger than they look, and some smaller. What affects the quote:

  • The type of sealant required
  • Access and height
  • How many rooms, windows or areas are involved
  • Mould in or behind the old joints

What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.

Asking for a quote

A few details help us give you an accurate quote. When you get in contact, it helps to mention:

  • Where the property is
  • Whether it’s a home or a business
  • Any access issues, like height or stairs
  • Any previous sealing or DIY work

We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or drop us an email.

FAQs for Crowell Hill

Do you cover smaller places like Crowell Hill?

Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Can you do fire rated sealant in Crowell Hill?

Yes. Our work covers London and the South East, and Crowell Hill is part of that. You can phone 0345 464 0079 or email us and let us know what needs doing.

Are you an approved applicator?

Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.

Is it OK to seal over old sealant?

No, it will not last. It may look fine at first, but the new layer lifts away from the old one. The old sealant has to come out completely.

Can you give us a record of the work?

Yes. We note each location and the product that went in.

What do you put in the joint?

Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.

Can you quote for more than one area?

Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

Do you have insurance?

Yes, we are fully insured for every job we do.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job