Windsor and Maidenhead · England

Fire Rated Sealant in Cookham Dean

Fire-stopping gaps in Cookham Dean need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.

  • Gaps flagged on a fire risk assessment
  • New service routes left unsealed after building work
  • Unsealed gaps where pipes and cables go through a wall

Trusted fire rated sealant in Cookham Dean

Fire rated sealant for homes and businesses in Cookham Dean

Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. Anything unsuitable comes out first and reseal with a fire-rated product tested for that kind of gap. Common call-outs are for unsealed gaps around fire door frames and linear gaps at the head of walls, across service penetrations, pipe & cable gaps and door frames.

If you have holiday lets, a converted barn used for business or a community building near Cookham Dean, the washrooms, kitchens and any fire-rated joints need the same care as a big site.

Every job is covered by our 12-month guarantee, wherever you are in Windsor and Maidenhead.

Place
Cookham Dean (SL6)
Wider area
Windsor and Maidenhead
Cover
12 months on all our work
Price
A clear price before we start
Telephone
0345 464 0079
Page updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

When to call us in Cookham Dean

Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk in a place that needed a tested fire seal. It looks sealed, but it isn’t fire-rated.

Signs it’s time to call us include:

  • Gaps around pipes and cables through fire-resisting walls
  • Joints picked up in a fire-stopping survey
  • Gaps left after a refit or conversion
  • Cracked or shrunken fire-rated sealant

Managing a site like Cookham Dean CofE Primary School? Then fire-stopping around service openings should be restored whenever new services go in.

Before you book anyone

  • How the joint is cleaned and prepared
  • Whether the sealant suits the joint
  • How long to leave it before use
  • Whether they’re fully insured

How to choose a mastic man

How the job changes by surface

Service penetrations

Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. We seal it with a product tested for that service and gap size.

Plasterboard walls

Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail.

Common questions in Cookham Dean

Do you work for landlords with property near Cookham station?

Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.

Will you come out to Cookham Dean?

Yes. Cookham Dean is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can you tell me which gaps need fire stopping?

No. We work from the specification you give us, and apply each product to its tested details.

What does intumescent mean?

An intumescent sealant expands when it gets hot. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.

Where is Mr Mastic based?

We are a Crawley-based firm. We work across South East England, London and Scotland.

Will you leave a mess?

Tidy work is part of the job. Nearby surfaces are protected.

Is there any odour?

Possibly a little. Any smell clears as the sealant cures, and ventilation helps.

Can you do several jobs on one visit?

Yes. Just list everything you need and you’ll get one quote.

Fire rated sealant around Cookham Dean

In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details. There are hotels and other places to stay in and around Cookham Dean. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.

Letting a property close to Cookham station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as Church of St John the Baptist, older buildings that have had new heating or wiring often have service gaps worth checking.

Cookham Dean is about 2 miles south-east of Marlow, in Windsor and Maidenhead. Anywhere in SL6, we can carry out fire rated sealant at your property. Across Windsor and Maidenhead, we cover 57 places, and Cookham Dean is one of them. There’s also a page for Reading, roughly 12 miles from Cookham Dean.

Every address in SL6 is covered for fire rated sealant. We cover properties on Kings Lane, Popes Lane and Hills Lane and the roads around them. Neighbouring places we cover for fire rated sealant include Cookham (1 mile east), Bisham (1 mile west), Furze Platt (2 miles south), Marlow (2 miles north-west) and Temple (2 miles west). Within a short drive, we also cover Maidenhead (3 miles south), Windsor (7 miles south-east), Boyn Hill (3 miles south), North Ascot (10 miles south), Dedworth (7 miles south-east) and Broomhall (12 miles south-east).

Near you in Cookham Dean

In Cookham Dean, that means homes and buildings near Jolly Farmer pub and Furze Platt Senior School and the streets around them. For rail, the closest station is Cookham station, roughly 1 mile east of the centre. Well-known places in the area include Marlow Community Hospital (1.6 miles north-west) and Marlow Museum (1.5 miles north-west). Not far away are Taplow Lake and Carpenter's Wood.

Map of Cookham Dean © OpenStreetMap contributors

When something else is needed

New sealant cannot fix everything, and we will tell you before work begins. It won’t solve:

  • Fire risk assessments, which need a qualified assessor
  • Construction that doesn’t provide fire resistance on its own
  • Large holes that need a different fire-stopping system

If in doubt, call 0345 464 0079 or email us and we’ll say what we think.

Joints and surfaces we work on

  • Service penetrations
  • Plasterboard & masonry
  • Pipe & cable gaps
  • Linear gaps
  • Flats & HMOs
  • Door frames

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. We suggest:

  • Photograph sealed gaps before they’re covered up
  • Flag any open gap you spot round a pipe or cable
  • Tell trades working in the building that fire seals must be put back
  • Include fire stopping when you schedule refits

Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.

An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Sealing them early helps on every front.

DIY sealant or a professional job?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

The process

A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It usually takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Cookham Dean, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
  2. We measure every gap and note what it’s in and what passes through.
  3. Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
  4. The specified fire-rated sealant goes in over any backing its detail requires.
  5. We hand over a list of locations and products.

Preparing for the visit

  • Plan for the work area to be out of bounds to pets and children
  • Where the joints are inside, avoid wetting them before we arrive
  • Clear the area around the work

How to get a quote

For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work.

Ask for a quote

Advice

For landlords and businesses

From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job