Oxfordshire · England
Fire Rated Sealant in Clifton Hampden
Fire rated sealant for Clifton Hampden and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Gaps around pipes and cables through fire-resisting walls
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps around fire door frames
Fire rated sealant in Clifton Hampden
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. If you have door frames with gaps between frame and wall and gaps around pipes and cables through fire-resisting walls, we can help, on linear gaps, door frames and flats & HMOs alike.
Somewhere as small as Clifton Hampden, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
The work is covered for a year after we finish. If anything is not right with it, phone 0345 464 0079 or send us an email.
- Location
- Clifton Hampden (OX14)
- Wider area
- Oxfordshire
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlords, agents and businesses in Clifton Hampden
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Landlords and letting agents in Clifton Hampden can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
What we can’t put right
We’ll always be straight with you, so here’s what new sealant will not do:
- Certifying a building or signing off its fire safety
- Fire doors that need new seals, closers or hardware
- Large holes that need a different fire-stopping system
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer before you book.
Joints and surfaces we work on
- Plasterboard & masonry
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Linear gaps
- Service penetrations
DIY sealant or a professional job?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
What we’re called out for in Clifton Hampden
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
Any of these means the joints need attention:
- Unsealed gaps around fire door frames
- Holes left by a change of layout
- Ordinary sealant used where a fire-rated product was needed
- Linear gaps at the head of walls
If you look after a church, hall or community building such as Church of St Michael and All Angels, service openings in its walls need the right fire-rated sealant, as in any building.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- How long to leave it before use
- Which colour the sealant will be
- Are they insured?
Clifton Hampden: your questions answered
I let a flat near Culham station. Can you help?
Yes. We work for landlords and letting agents as well as householders. You can phone 0345 464 0079 or email us with the details for a clear quote.
Do you cover Clifton Hampden for fire rated sealant?
Yes, Clifton Hampden is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated to help seal the gap. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
How do I get a quote for fire rated sealant in Clifton Hampden?
Size, access and the old material all affect the cost. Ask us for a quote.
Can you give us a record of the work?
Yes. You get a list of where we worked and what we used for your files.
Do you take on fire stopping in schools and offices?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
Is standard sealant good enough for a fire gap?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. We cut it out and reseal with a fire-rated product.
Aftercare tips
After the cure time, these simple habits help:
- Make resealing part of every contractor’s brief
- Check risers, ceiling voids and cupboards during building checks
- Photograph sealed gaps before they’re covered up
- Report cracked or damaged seals as soon as you notice them
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
Surface by surface
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before any work starts so residents know what to expect.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the sealant bonds.
Places near Clifton Hampden
What else we do in Clifton Hampden
What we do, step by step
Before we leave, we go over the finished joints with you. The visit itself usually takes from a few hours to a few days, depending on the number of gaps and the access, depending on the amount of work. In a small place like Clifton Hampden, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Before we arrive
- Mention if the joints have been sealed before
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
How to get a quote
For a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Advice
Commercial buildings in Clifton Hampden
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For landlords with property near Culham station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Schools such as Clifton Hampden Church of England Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Clifton Hampden is about 3 miles south-east of Abingdon-on-Thames, in Oxfordshire. Whether you’re in the middle of Clifton Hampden or further out, we cover fire rated sealant for every kind of property. Clifton Hampden is one of 443 places in Oxfordshire where we work. You can also see our page for Oxford, about 7 miles away.
We cover every part of OX14 for fire rated sealant and the streets around it. If you need fire rated sealant at a property on High Street, Abingdon Road and Courtiers Green or anywhere close by, we can help. We also cover Long Wittenham (1 mile south), Appleford-on-Thames (2 miles south-west), Nuneham Courtenay (2 miles north), Culham (2 miles west) and Radley (3 miles north-west). Within a short drive, we also cover Oxford (7 miles north), Didcot (4 miles south-west), Abingdon-on-Thames (3 miles north-west), Witney (15 miles north-west), Thame (12 miles north-east) and Wantage (10 miles south-west).
Landmarks near Clifton Hampden
Around Clifton Hampden, our work takes us to homes and buildings near Nuneham Courtenay and the streets around them. For rail, the closest station is Culham station, roughly 1.1 miles west. A little further out are Pendon Museum (1.4 miles south) and FitzHarris Castle (3.3 miles west). Green spaces nearby include Wittenham Clumps and Mowbray Fields.