Oxfordshire · England
Fire Rated Sealant in Catslip
Professional fire rated sealant in and around Catslip, with every bit of old sealant taken out first.
- Open joints along the top of partitions
- Standard silicone or caulk in a fire-stopping gap
- Door frames with gaps between frame and wall
How the visit works
There’s no need to move everything out, just the space around the work. We protect the rest, and the work takes anything from a few hours to several days, depending on how many gaps there are for a typical job. Somewhere like Catslip needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Try not to wet indoor joints just before the visit
- Plan for the work area to be out of bounds to pets and children
Getting a quote
Asking for a quote is easy: tell us what needs doing and where. Photos by email help us understand the job.
Advice
Fire rated sealant for homes and businesses in Catslip
Until it’s heated, intumescent sealant behaves like an ordinary sealant; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it, so we work to the manufacturer’s details. If you’re dealing with gaps where walls meet ceilings or slabs and unsealed gaps where pipes and cables go through a wall, we can put it right.
For a small place like Catslip, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
Our work is backed for twelve months, in Catslip and everywhere else we cover.
- Place
- Catslip (RG9)
- Region
- Oxfordshire
- Cover
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Letting agents and landlords in Catslip can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for.
Fire rated sealant in Catslip: local notes
There are hotels and other places to stay in and around Catslip. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
For buildings such as Church of St Bartholomew, service openings in its walls need the right fire-rated sealant, as in any building. Managing a site like Nettlebed Community School? Then gaps opened by contractors for new cabling are a common finding in schools and offices. For landlords with property near Henley-On-Thames station, any gap left by new services in shared walls should be closed with a fire-rated product.
Catslip is about 7 miles north of Caversham, in Oxfordshire. We provide fire rated sealant to homes and businesses in Catslip. We cover 443 towns and villages across Oxfordshire, large and small. You can also see our page for Reading, roughly 9 miles from Catslip.
Every address in RG9 is covered for fire rated sealant, from the main roads to the quietest streets. Neighbouring places we cover for fire rated sealant include Nettlebed (1 mile north-west), Highmoor (1 mile south-west), Highmoor Cross (1 mile south), Bix (2 miles south-east) and Middle Assendon (2 miles east). Larger places within reach include Didcot (12 miles west), Abingdon-on-Thames (15 miles north-west), Thame (12 miles north), Henley-on-Thames (4 miles south-east), Benson (6 miles north-west) and Chinnor (9 miles north).
Landmarks near Catslip
Around Catslip, our work takes us to homes and buildings near The Sun Inn Public House, among other places. Catslip’s nearest station is Henley-On-Thames station, about 4.4 miles south-east of the centre. Open spaces near Catslip include Warburg Nature Reserve.
Different surfaces, different methods
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Flats and HMOs
Conversions generally leave a mix of old and new service holes. We seal the ones on your specification with a tested product.
Why act early in Catslip
Paying for fire stopping that has to be redone is a false economy. If the details weren’t followed, the seal may need redoing when the building is next checked. In a small place like Catslip, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- Any old sealant cut out fully, not covered over
- Fully insured
- Anti-fungal sanitary silicone in wet areas
- 4.9 on Google from 180+ five-star reviews
When something else is needed
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- Walls or floors that weren’t built to resist fire
- Openings too large for sealant, which need batts, boards or another system
- Issuing a fire rating or certificate for a building
If in doubt, phone 0345 464 0079 or email us and we will say what we think.
Joints and surfaces we work on
- Plasterboard & masonry
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
- Door frames
Places near Catslip
Also in Catslip
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Plan fire stopping into any work that goes through walls or floors
- Check risers, ceiling voids and cupboards during building checks
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Ask which product was used before you paint
Avoid covering a sealed gap with anything that isn’t part of the tested detail. Repairs should use a matching fire-rated product. Ask us if you’re not sure which product was used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is normally a straightforward job.
How we quote for fire rated sealant
The quote reflects the job in front of us. We take into account:
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- Working hours on commercial sites
- The product the joint needs
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The address or postcode of the job
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
- What’s wrong with the joints now
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, call 0345 464 0079 or send us an email.
FAQs for Catslip
Do you work in hotels near Catslip?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you cover smaller places like Catslip?
Yes. Catslip is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
How long does fire rated sealant take?
That depends on how much there is to do, but most jobs take a few hours for a handful of gaps, and longer for a whole building. We will give you a better idea when we quote.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
What information do you need?
Tell us what needs doing and where. We will ask anything else we need to know.
What fire rating will the seal have?
Ratings and certificates aren’t something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Do you remove the old sealant?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.