Essex · England
Fire-rated sealant in Burnt Heath, Essex
Fire rated sealant across Burnt Heath and nearby, with old sealant always removed completely and a 12-month guarantee.
- Ordinary sealant used where a fire-rated product was needed
- Fire stopping disturbed by later work
- Open holes round services passing through fire walls
How it works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes from a few hours to a few days, depending on the number of gaps and the access from start to finish. Somewhere like Burnt Heath needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Preparing for the visit
- Let us know about parking restrictions
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.
Read more
Fire rated sealant in Burnt Heath, done properly
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. We are often asked to deal with unsealed gaps where pipes and cables go through a wall and joints picked up in a fire-stopping survey, on flats & HMOs, door frames and linear gaps.
In a village or hamlet like Burnt Heath, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Where
- Burnt Heath (CO7)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
If you manage several properties in or around Burnt Heath, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Also near Burnt Heath
What else we do in Burnt Heath
Surface by surface
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist, and we’ll say if we spot a problem with them.
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. The sealant has to be one tested in plasterboard.
Commercial buildings in Burnt Heath
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Letting a property close to Manningtree station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Burnt Heath is about 5 miles east of Colchester, in Essex. Our applicators cover fire rated sealant for homes and businesses in Burnt Heath and the surrounding area, as part of our work across Essex. Burnt Heath is one of 644 places in Essex we cover for fire rated sealant. We also work in Chelmsford, about 25 miles from Burnt Heath.
Our applicators cover all of the CO7 postcode area for fire rated sealant. If you need fire rated sealant at a property on Waterhouse Lane, Back Road and Frating Road or anywhere close by, our applicators can take on the job. Close by, we work in Bromley Cross (1 mile south), Foxash Estate (1 mile north), Little Bromley (2 miles east), Lawford (3 miles north-east) and Manningtree (3 miles north-east). We also work in nearby towns such as Colchester (5 miles west), Clacton-on-Sea (10 miles south-east), Harwich (11 miles east), Camulodunum (6 miles west), Greenstead (3 miles south-west) and Tiptree (13 miles south-west).
Landmarks near Burnt Heath
Typical jobs here are in homes near The Cross Inn and Ardleigh Park and the streets around them. The nearest railway station is Manningtree station, roughly 3.1 miles north-east of the centre. Nearby you’ll also find Colchester Castle (4.5 miles west) and The Munnings Museum (2.6 miles north). Green spaces nearby include Cattawade Marshes.
How to look after the new joints
Simple care keeps the joints in good condition. Our advice:
- Ask every contractor to reseal any fire stopping they disturb
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Photograph sealed gaps before they’re covered up
- Look in service cupboards and ceiling voids from time to time
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is generally a straightforward job.
Common questions in Burnt Heath
Do you work for landlords with property near Manningtree station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.
Do you cover smaller places like Burnt Heath?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do the sealants smell?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Can I use normal mastic around a pipe through a fire wall?
No. Standard sealants aren’t made or tested to stop fire. If it’s been used, we remove it and use the right product.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
What information do you need?
A short description and the location. If we need more, we will ask.
What we are called out for in Burnt Heath
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it’s easy to leave unsealed when doors are changed.
The problems people usually mention when they call include:
- Open holes round services passing through fire walls
- Old fire sealant that has split or come away
- Sealant items on a fire risk assessment action list
- Standard silicone or caulk in a fire-stopping gap
For buildings such as Church of St Mary, service openings in its walls need the right fire-rated sealant, as in any building.
Before you book anyone
- Which colour the sealant will be
- The length of the guarantee
- Whether they seal over old material or remove it
- Who does the work, and how experienced they are
How we quote for fire rated sealant
Call for a quick quote. The main things that affect it are:
- The number of rooms or windows
- How easy the joints are to reach
- Any mould that needs treating
- The product the joint needs
The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
What to tell us for a quote
When you contact us, it’s useful to know:
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- A few photos by email, if you can
- Any access issues, like height or stairs
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work.
Should I try it myself first?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.