Hampshire · England
Fire-rated sealant in Buriton, Hampshire
Professional fire rated sealant in and around Buriton, with every bit of old sealant taken out first and a one-year guarantee.
- Unsealed gaps where pipes and cables go through a wall
- Door frames with gaps between frame and wall
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant in Buriton
Deciding which gaps need fire stopping is not our role; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. We work on service penetrations, linear gaps and plasterboard & masonry, and the jobs we see most are new service routes left unsealed after building work and fire seals that have cracked with movement.
In a village or hamlet like Buriton, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or drop us an email.
- Place
- Buriton (GU31)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026

Different surfaces, different methods
Linear gaps
Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement, following the tested detail.
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service to make sure it suits the product.
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How it works
Every visit runs the same way: we check the joints, protect the area around them, carry out the job and clear up. Most jobs take a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Buriton, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products for your records.
Getting ready for the visit
- Move anything stored near the joints
- Let us know about earlier repairs to the joints
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.
Read more
Fire rated sealant around Buriton
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Managing a site like Buriton Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices. If you let a flat or house near Petersfield station, any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a church, hall or community building such as Church of St Mary, older buildings that have had new heating or wiring often have service gaps worth checking.
Buriton is about 2 miles south of Petersfield, in Hampshire. Buriton gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 683 places across Hampshire. You can also see our page for Portsmouth, roughly 13 miles from Buriton.
Postcode districts we cover here for fire rated sealant: GU31. Fire rated sealant is available to properties on High Street, Heatherfield and Petersfield Road and the roads around them. If you’re just outside Buriton, we cover Weston (1 mile north-west), Nursted (2 miles east), Ramsdean (2 miles north-west), Chalton (3 miles south) and Blendworth (4 miles south). Larger places within reach include Gosport (15 miles south-west), Havant (8 miles south), Fareham (14 miles south-west), Horndean (5 miles south-west), Alton (12 miles north) and Waterlooville (7 miles south-west).
Local landmarks in Buriton
In Buriton, that means homes and buildings near The Nest pub, The Petersfield School and Ditcham Park, among other places. For rail, the closest station is Petersfield station, about 2.1 miles north of the centre. Nearby you’ll also find Bear Museum (1.8 miles north) and Petersfield Community Hospital (1.9 miles north). Open spaces near Buriton include Head Down.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Report cracked or damaged seals as soon as you notice them
- Photograph sealed gaps before they’re covered up
- Make resealing part of every contractor’s brief
- Keep the record of products and locations with your fire safety documents
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and get them seen to.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Get it sealed and recorded.
What sealant work cannot fix
To be straight with you, there are a few things sealant will not fix:
- Construction that doesn’t provide fire resistance on its own
- Sign-off of the building, which sits with building control or your assessor
- Big openings where sealant alone is not the tested solution
If you are not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.
What we seal
- Door frames
- Linear gaps
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
- Pipe & cable gaps
Nearby places to Buriton
Also in Buriton
What happens if it’s left?
Doing it once, properly, beats doing it twice. Work that doesn’t follow the tested detail may have to come out again once someone inspects it. Older cottages and farmhouses around Buriton can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
The cost reflects the work involved, not guesswork. That is why we ask about the job first.
Why us?
- Experience in homes, commercial sites and hotels
- 180+ five-star Google reviews
- We leave the area clean and tidy
- An ARBOMaster approved applicator
See how sealant jobs are priced and our reviews.
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Buriton: your questions answered
Can you do fire rated sealant in Buriton?
Yes. Our work covers London and the South East, and Buriton is part of that. You can phone 0345 464 0079 or send us an email and let us know what needs doing, and we will send you a clear quote.
Do you work for landlords with property near Petersfield station?
Yes, we work for landlords and agents. Just call 0345 464 0079 or email us and tell us about the property, and we will send you a clear quote.
How much does fire rated sealant cost in Buriton?
Size, access and the old material all affect the cost. Ask us for a quote and we’ll talk you through it.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before resealing.
Are you insured?
Yes, we are fully insured for domestic and commercial work.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Can I use normal mastic around a pipe through a fire wall?
No. It might close the gap, but it isn’t a fire-rated seal. A tested fire-rated product is needed and we can apply it for you.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
