East Sussex · England
Broyle Side Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Broyle Side, with a 12-month guarantee on every job. Call for a quick quote.
- Gaps around pipes and cables through fire-resisting walls
- Gaps flagged on a fire risk assessment
- Open joints along the top of partitions
Landlord and commercial work in Broyle Side
Landlords and letting agents in Broyle Side can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
Housing providers, facilities teams and property managers book us too in Broyle Side and across East Sussex. We can quote a run of properties together, and we’re fully insured for the work.
About our fire rated sealant in Broyle Side
We can work through a building room by room or floor by floor, noting the locations and products as we go. That record is useful for your files and for whoever looks at the building next. We work on service penetrations, door frames and pipe & cable gaps, and the jobs we see most are open gaps behind door architraves and gaps where walls meet ceilings or slabs.
For a small place like Broyle Side, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
All of our work is guaranteed for twelve months, in Broyle Side and everywhere else we cover.
- Location
- Broyle Side (BN8)
- Wider area
- East Sussex
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Also near Broyle Side
What else we do in Broyle Side
Your questions about fire rated sealant in Broyle Side
Is Broyle Side within the area you cover?
Yes, Broyle Side is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you cover Broyle Side for fire rated sealant?
Yes. We work across London and the South East, and Broyle Side is part of that. Just phone 0345 464 0079 or email us with a few details of the job.
Can ordinary silicone be used in a fire-stopping gap?
No. It might close the gap, but it is not a fire-rated seal. A tested fire-rated product is needed, or ask us to do it.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Do you seal gaps around fire door frames?
Yes, where the gap suits a sealant detail. Our work is the gap around the frame, and we’ll mention anything we notice about the door.
Are you fully insured?
Yes. We are fully insured, and we can confirm the details when we quote.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Report cracked or damaged seals as soon as you notice them
- Photograph sealed gaps before they’re covered up
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Tell trades working in the building that fire seals must be put back
Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
DIY versus a professional finish
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Leave it or put it right?
If an assessor has flagged gaps, it makes sense to close them before the next review. Having them sealed and recorded now gives you evidence that the item was dealt with. Around Broyle Side, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Why book with us
- We’re fully insured
- Rated 4.9 stars on Google
- Any old sealant cut out fully, not covered over
- We leave the area clean and tidy
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. It won’t solve:
- Problems with the door itself rather than the gap around the frame
- Big openings where sealant alone isn’t the tested solution
- Issuing a fire rating or certificate for a building
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer.
Surfaces we seal
- Door frames
- Linear gaps
- Service penetrations
- Plasterboard & masonry
- Pipe & cable gaps
- Flats & HMOs
Commercial buildings in Broyle Side
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For landlords with property near Glynde station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Ringmer Community College and Sixth Form, fire-stopping around service openings should be restored whenever new services go in. For buildings such as The Parish Church of St Mary the Virgin, service openings in its walls need the right fire-rated sealant, as in any building.
Broyle Side is about 3 miles north-east of Lewes, in East Sussex. We provide fire rated sealant to householders, landlords and businesses in Broyle Side and nearby. Broyle Side is one of 289 towns and villages in East Sussex we cover. Brighton is on our list too, about 10 miles from Broyle Side.
Here we cover the BN8 postcode area for fire rated sealant. Whether your property is on Broyle Paddock, Ballard Drive and Turnpike Close or anywhere close by, we can help. We also cover the places around Broyle Side: Norlington (1 mile west), Upper Wellingham (2 miles west), Rose Hill (2 miles north), Barcombe Mills (2 miles north-west) and Isfield (3 miles north). Within a short drive, we also cover Eastbourne (12 miles south-east), Seaford (9 miles south), Lewes (3 miles south-west), Hailsham (8 miles east), Crowborough (11 miles north) and Uckfield (5 miles north).
Landmarks near Broyle Side
In Broyle Side, that means homes and buildings near Ringmer Primary and Nursery School and The Green Man pub. Broyle Side’s nearest station is Glynde station, about 2.9 miles south. Other landmarks nearby include Museum of Agricultural Bygones (0.8 miles south-east) and Lewes Castle (3.6 miles south-west). Green spaces nearby include Malling Down and Cliffe Hill.
What the job involves on each surface
Masonry and concrete
Holes through concrete and block are rarely neat. We check the gap size around the service against the product’s tested range.
Flats and HMOs
In occupied buildings, we plan the order of work with you. Access to flats and common areas is agreed in advance.
What happens on the day
We keep the work tidy and contained to the joints we are treating, so you can carry on as normal. Expect the work to take from a few hours to a few days, depending on the number of gaps and the access, and we tell you how long to leave it before we go. For a village or hamlet like Broyle Side, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
How to prepare
- Keep children and pets away from the work area
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
How to get a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will take it from there.