Essex · England
Bradwell on Sea Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Bradwell on Sea. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
- Standard silicone or caulk in a fire-stopping gap
About our fire rated sealant in Bradwell on Sea
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. Anything unsuitable comes out first and the gap is resealed with a product tested for that use. We work on pipe & cable gaps, plasterboard & masonry and door frames, and common reasons people get in touch are open joints along the top of partitions and fire stopping disturbed by later work.
In a village or hamlet like Bradwell on Sea, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Our work is backed for twelve months.

- Place
- Bradwell on Sea (CM0)
- Wider area
- Essex
- Guarantee
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Why act early in Bradwell on Sea
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. Where a wall is exposed, as many are in small places like Bradwell on Sea, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Why Bradwell on Sea customers choose us
- Quality sealants from Arbo and Everbuild
- Fully insured
- Experience in homes, commercial sites and hotels
- Tidy, careful work
See our cost guide or customer reviews.
Landlord and commercial work in Bradwell on Sea
For anyone letting property in or around Bradwell on Sea, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.
What affects the quote in Bradwell on Sea
Call for a quick quote. The main things that affect it are:
- Whether the work is at height
- Any mould that needs treating
- The type of sealant required
- How many areas need sealing
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What we need to know
When you contact us, it’s useful to know:
- What the problem is, such as mould, gaps, leaks or cracking
- Access, such as stairs, a lift or height
- Where the property is
- If it’s domestic, commercial or a hotel
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or send us an email and describe the job.
Surface by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We seal them along their full length leaving no stretch unsealed.
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We seal the gaps your assessor has identified, flat by flat if needed.
What we’re called out for in Bradwell on Sea
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
Common reasons people contact us are:
- Unsealed gaps where pipes and cables go through a wall
- Gaps where walls meet ceilings or slabs
- Fire seals that have cracked with movement
- New service routes left unsealed after building work
Schools such as St Cedd's Church of England Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
What to look for in a quote
- How the surfaces are prepared before sealing
- Whether VAT is included
- Whether all the old sealant comes out first
- Which sealant they’ll use, and why
What fire rated sealant looks like in Bradwell on Sea
If you run a hotel, guest house or holiday let in a coastal place like Bradwell on Sea, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Church of St Thomas, older buildings that have had new heating or wiring often have service gaps worth checking.
Bradwell on Sea is about 9 miles east of Maldon, in Essex. We provide fire rated sealant to householders, landlords and businesses in Bradwell on Sea and nearby. 644 places in Essex are on our list, from the larger towns to small villages. For nearby work, see our Chelmsford page (18 miles or so).
Every address in CM0 is within our area for fire rated sealant. If you need fire rated sealant at a property on High Street, East End Road and South Street or anywhere close by, our applicators can take on the job. Close by, we work in Bradwell Waterside (1 mile north-west), Mill End (1 mile south-west), Bradwell Wick (2 miles south-west), Tillingham (2 miles south) and Ramsey Island (3 miles west). Larger places within reach include Colchester (11 miles north), Clacton-on-Sea (12 miles north-east), Maldon (9 miles west), Witham (13 miles north-west), Rochford (13 miles south-west) and Camulodunum (11 miles north).
What’s near Bradwell on Sea
Locally, jobs take us to homes and businesses close to The Kings Head pub. Not far away are Bradwell Shell Bank.
Places near Bradwell on Sea
More services for Bradwell on Sea
Common questions in Bradwell on Sea
Do you cover Bradwell on Sea for fire rated sealant?
Yes. We work across London and the South East, and Bradwell on Sea is part of that. You can ring 0345 464 0079 or email us and let us know what needs doing.
Is Bradwell on Sea within the area you cover?
Yes, Bradwell on Sea is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Will you assess my building’s fire safety?
No, assessment isn’t something we do. When your assessor or designer has set out what’s needed, we can quote for the fire-rated sealant items.
Do you do fire sealant around door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant. The door leaf and its hardware need a door specialist.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Is there a guarantee?
Yes: twelve months. If anything is not right with the work within the year, let us know and we’ll sort it.
Do you take out the old sealant first?
Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
What happens on the day
We bring everything the job needs with us, so you don’t need to buy or prepare anything. After a quick look at the joints together, the area is protected and the work begins. It normally takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Bradwell on Sea, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
How to prepare
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
- Mention any tricky access
Getting a quote
For fire rated sealant in Bradwell on Sea, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.
