Essex · England
Ramsey Island Fire Rated Sealant
Fire-stopping gaps in Ramsey Island need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Open holes round services passing through fire walls
- Gaps filled with a product that is not fire-rated
- Open joints along the top of partitions
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
If you manage several properties in or around Ramsey Island, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Fire rated sealant in Ramsey Island, done properly
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. If you are dealing with linear gaps at the head of walls and fire seals that have cracked with movement, we can put it right, whatever the surface.
For a small place like Ramsey Island, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
A 12-month guarantee comes as standard.
- Where
- Ramsey Island (CM0)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Aftercare tips
A little care helps the new joints last. We recommend:
- Keep photos of seals that will be hidden
- Plan fire stopping into any work that goes through walls or floors
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Ask every contractor to reseal any fire stopping they disturb
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole.
What affects the quote in Ramsey Island
Call for a quick quote. What matters most is:
- Any mould that needs treating
- The product the joint needs
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Asking for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- How we’d reach the joints
- Where the job is, and your postcode
- If someone has resealed it before
- The problem you’ve noticed
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, phone 0345 464 0079 or email us.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Workplaces and buildings in Ramsey Island
If you run a hotel, guest house or holiday let in a coastal place like Ramsey Island, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
For landlords with property near Southminster station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Ramsey Island is about 6 miles east of Maldon, in Essex. Whether you’re in the middle of Ramsey Island or further out, we cover fire rated sealant for every kind of property. Across Essex, we cover 644 places, Ramsey Island among them. We also work in Chelmsford, about 15 miles from Ramsey Island.
We work across the CM0 postcode area for fire rated sealant. Fire rated sealant is available to properties on Sunny Way, Seaway and Beachy Drive and the roads around them. If you are just outside Ramsey Island, we cover St Lawrence Bay (1 mile north-west), Bradwell Wick (2 miles east), Mill End (2 miles east), Tollesbury (3 miles north) and Bradwell Waterside (3 miles east). We also work in nearby towns such as Colchester (12 miles north), Chelmsford (15 miles west), Clacton-on-Sea (15 miles north-east), Maldon (6 miles west), Rayleigh (13 miles south-west) and Witham (10 miles north-west).
Near you in Ramsey Island
The closest station to Ramsey Island is Southminster station, roughly 3.9 miles south. Other landmarks nearby include Maldon & District Agricultural & Domestic Museum (3.6 miles north-west). Open spaces near Ramsey Island include Tollesbury Wick.
Ramsey Island questions
Can you help a landlord with a rental near Southminster station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.
Can you do fire rated sealant in Ramsey Island?
Yes, Ramsey Island is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Can you tell me which gaps need fire stopping?
No, we don’t assess buildings. When your assessor or designer has set out what’s needed, we’ll quote for the sealant work on it.
What fire rating will the seal have?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Is standard sealant good enough for a fire gap?
No. A gap that needs fire stopping needs a tested fire-rated product.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do you need fire rated sealant in Ramsey Island?
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Knocks, maintenance and building work damage it further.
The most common problems we see are:
- Ordinary sealant used where a fire-rated product was needed
- Gaps flagged on a fire risk assessment
- Open holes round services passing through fire walls
- New service routes left unsealed after building work
Community buildings like St Lawrence Church Centre are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- What the quote includes, VAT included or not
- When the joint can take water or movement
- Are they insured?
- Whether you can choose the colour
What we do, step by step
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Ramsey Island needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your records.
Getting ready for the visit
- Tell us about any water getting in
- Tell us about any previous sealing or DIY attempts
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
Want a quote for fire rated sealant? Please ring 0345 464 0079 or drop us an email with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Related advice
How the job changes by surface
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before work begins.
Linear gaps
Long, narrow gaps appear where walls meet slabs and ceilings. They’re sealed with a fire-rated sealant over backing where the detail calls for it.