Essex · England
Bradfield Heath Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Bradfield Heath and across Essex. Fully insured, ARBOMaster approved and guaranteed for a year.
- Standard silicone or caulk in a fire-stopping gap
- Open gaps behind door architraves
- Gaps flagged on a fire risk assessment
Common problems we fix in Bradfield Heath
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
These are the problems we are asked about most:
- Open joints along the top of partitions
- Gaps around pipes and cables through fire-resisting walls
- Gaps flagged on a fire risk assessment
- Fire stopping disturbed by later work
For buildings such as Church of St Lawrence, service openings in its walls need the right fire-rated sealant, as in any building.
Before you book anyone
- How the joint is cleaned and prepared
- What guarantee comes with the work
- How hidden problems are handled
- When the joint can take water or movement
Fire rated sealant in Bradfield Heath
Intumescent sealant looks much like any other sealant until it gets hot; then it swells to help close the gap. The right product depends on the gap size, the substrate and what passes through, so we follow the tested detail for each one. If you have gaps filled with a product that isn’t fire-rated and holes left by a change of layout, we can put it right, whatever the surface.
For a small place like Bradfield Heath, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
We stand behind the work with a one-year guarantee, so you’re covered after we’ve gone.
- Location
- Bradfield Heath (CO11)
- Region
- Essex
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What fire rated sealant looks like in Bradfield Heath
For seaside hotels, guest houses and holiday lets around Bradfield Heath, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Letting a property close to Mistley station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Schools such as Bradfield Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Bradfield Heath is about 7 miles west of Harwich, in Essex. We provide fire rated sealant to homeowners, landlords and businesses in Bradfield Heath. Across Essex, we cover 644 places, Bradfield Heath among them. For nearby work, see our Chelmsford page, about 30 miles away.
We cover every part of CO11 for fire rated sealant. Local streets include Heath Road, Winney Close and King Street, and we cover them all. Neighbouring places we cover for fire rated sealant include Bradfield (1 mile north-east), Wix (2 miles south-east), Wix Green (2 miles south-east) and Wrabness (3 miles east). We also work in nearby towns such as Colchester (9 miles west), Clacton-on-Sea (9 miles south), Harwich (7 miles east), Camulodunum (10 miles west), Greenstead (8 miles west) and Wivenhoe (8 miles south-west).
Around Bradfield Heath
Around Bradfield Heath, our work takes us to homes and buildings near The Village Maid pub and Manningtree High School. For rail, the closest station is Mistley station, roughly 1.6 miles north-west of the centre. Open spaces near Bradfield Heath include Alton Water and Wrabness Nature Reserve.
Why deal with it now?
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, and we work to the product details every time. Older cottages and farmhouses around Bradfield Heath can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
What you get with us
- Over 20 years’ experience
- Tidy, careful work
- Fully insured
- We never seal over old sealant
Read what affects the cost or customer reviews.
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Ask which product was used before you paint
- Never patch a fire seal with standard sealant
- Store the list of sealed gaps with your building paperwork
- Keep pictures of seals that will be hidden
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
When something else is needed
New sealant can’t fix everything, and we’d rather say so up front. It will not solve:
- Fire risk assessments, which need a qualified assessor
- Doors that are not fire doors in the first place
- Walls or floors that weren’t built to resist fire
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Flats & HMOs
- Door frames
- Pipe & cable gaps
- Service penetrations
- Plasterboard & masonry
- Linear gaps
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Also in Bradfield Heath
Landlord and commercial work in Bradfield Heath
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
FAQs for Bradfield Heath
Will you come out to Bradfield Heath?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Mistley station?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Will you assess my building’s fire safety?
No. That’s for a fire risk assessor, designer or building control. We apply fire-rated sealant to the requirements they set.
Is standard sealant good enough for a fire gap?
No. A gap that needs fire stopping needs a tested fire-rated product, installed to its details.
Is there a guarantee?
Yes. Every job comes with a 12-month guarantee.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.
Where do you work from?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
The process
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Bradfield Heath needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about earlier repairs to the joints
How to get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work and give you a clear price.