Oxfordshire · England
Bletchingdon Fire Rated Sealant
Fire rated sealant for Bletchingdon and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Open joints along the top of partitions
- Standard silicone or caulk in a fire-stopping gap
- New service routes left unsealed after building work
What fire rated sealant looks like in Bletchingdon
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as Church of St Giles, older buildings that have had new heating or wiring often have service gaps worth checking. For site and facilities teams at buildings such as Bletchingdon Parochial Church of England Primary School, fire-stopping around service openings should be restored whenever new services go in. Letting a property close to Tackley station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Bletchingdon is about 6 miles south-west of Bicester, in Oxfordshire. Jobs in Bletchingdon get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Bletchingdon is one of 443 towns and villages in Oxfordshire where we work for fire rated sealant. Our Oxford page covers work nearby, about 7 miles away.
Work in OX5 is quoted and booked the same way as anywhere else. You’ll find streets such as Station Road, St Giles and Annesley Close, all of which we cover. Neighbouring places we cover for fire rated sealant include Enslow (1 mile west), Kirtlington (1 mile north), Hampton Poyle (1 mile south), Weston-on-the-Green (2 miles east) and Kidlington (2 miles south). We also work in nearby towns such as Oxford (7 miles south), Banbury (15 miles north), Bicester (6 miles north-east), Abingdon-on-Thames (12 miles south), Witney (10 miles south-west) and Carterton (15 miles south-west).
Around Bletchingdon
We work in homes and buildings around The Blacks Head Public House. The closest station to Bletchingdon is Tackley station, roughly 2.1 miles north-west of the centre. Nearby you will also find Bicester Community Hospital (5.7 miles north-east) and Soldiers of Oxfordshire Museum (3.6 miles west). Green spaces nearby include Woodsides Meadow.
Fire rated sealant in Bletchingdon
Deciding which gaps need fire stopping is not our role; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Common call-outs are for holes left by a change of layout and fire stopping disturbed by later work, on door frames, flats & HMOs and service penetrations.
In a village or hamlet like Bletchingdon, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
A 12-month guarantee comes as standard, so you are not left on your own once the job is done.
- Location
- Bletchingdon (OX5)
- Region
- Oxfordshire
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Landlords, agents and businesses in Bletchingdon
Letting agents and landlords in Bletchingdon can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Nearby places to Bletchingdon
What else we do in Bletchingdon
What happens if it’s left?
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. Older cottages and farmhouses around Bletchingdon can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.
Why us?
- Approved under the ARBOMaster scheme
- Rated 4.9 stars on Google
- Experience in homes, commercial sites and hotels
- Quality sealants from Arbo and Everbuild
Honest limits
New sealant cannot fix everything, and we’ll tell you before work begins. Sealant will not put right:
- A wall that is not a fire-resisting element to begin with
- Problems with the door itself rather than the gap around the frame
- Issuing a fire rating or certificate for a building
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly.
What we seal
- Plasterboard & masonry
- Flats & HMOs
- Door frames
- Service penetrations
- Linear gaps
- Pipe & cable gaps
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
How to look after the new joints
So the new joints stay in good condition:
- Keep the record of products and locations with your fire safety documents
- Check risers, ceiling voids and cupboards during building checks
- Include fire stopping when you schedule refits
- Check whether a sealant can be painted before decorating over it
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and have them put right.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
Bletchingdon: your questions answered
Will you come out to Bletchingdon?
Yes. Bletchingdon is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Tackley station?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear price.
Will there be a smell?
Possibly a little. It fades as the sealant cures.
Can ordinary silicone be used in a fire-stopping gap?
No. It might close the gap, but it isn’t a fire-rated seal. A tested fire-rated product is needed.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you do fire sealant around door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant. The door leaf and its hardware need a door specialist.
Do you certify the fire stopping?
That is not something we state or certify. Your specification sets the requirement, and we apply a product tested for it with a record of each location.
How much does fire rated sealant cost in Bletchingdon?
Every job is different, so each one gets its own quote. For a quick quote, ring 0345 464 0079 or email us and tell us what needs doing and where.
Quotes for fire rated sealant in Bletchingdon
The quote reflects the job in front of us. We look at:
- The type of sealant required
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- How much there is to do
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re unsure, call 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What we need to know
Photos by email are helpful but not essential. Please mention:
- Any access issues, like height or stairs
- Where the job is, and your postcode
- Whether it’s a home or a business
- Photos by email, if that is easy
For fire rated sealant in Bletchingdon, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
What we do, step by step
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It normally takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Bletchingdon needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products for your files.
Before we arrive
- Let us know about stairs, lifts or work at height
- Let us know about parking restrictions
- Mention any sign-in or site rules at work premises
Get a quote
Every job is quoted individually. Just ring 0345 464 0079 or drop us an email with the details, and pictures are welcome.