East Sussex · England
Fire-rated sealant in Berwick, East Sussex
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Berwick. Fully insured, ARBOMaster approved and guaranteed for a year.
- Open holes round services passing through fire walls
- Gaps where walls meet ceilings or slabs
- Unsealed gaps around fire door frames
Fire rated sealant in Berwick
Intumescent sealant looks much like any other sealant until it gets hot; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it, so we follow the tested detail for each one. If you’re dealing with door frames with gaps between frame and wall and open holes round services passing through fire walls, we can help, on service penetrations, plasterboard & masonry and pipe & cable gaps alike.
For holiday lets, converted business premises or a community building near Berwick, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Place
- Berwick (BN26)
- Wider area
- East Sussex
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Why it’s worth doing now in Berwick
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing once someone inspects it. Older cottages and farmhouses around Berwick can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, ring 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Why us?
- An ARBOMaster approved applicator
- Fully insured
- Tidy, careful work
- Sanitary silicone with an anti-fungal additive in wet areas
How the visit works
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Berwick, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
- Let us know if you’ve seen damp or leaks
Ask for a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you’re ready, ring 0345 464 0079 or email us.
Advice
For landlords and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Housing providers, facilities teams and property managers book us too in Berwick and across East Sussex. Several sites can be quoted together, and we’re fully insured for the work.
Signs you need fire rated sealant in Berwick
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. We see plenty of fire stopping that was hurried, especially where it was squeezed in at the end of a project.
Common reasons people contact us are:
- New service routes left unsealed after building work
- Standard silicone or caulk in a fire-stopping gap
- Sealant items on a fire risk assessment action list
- Open joints along the top of partitions
Community buildings like The Parish Church of St Mary are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Questions to ask before you book
- Whether they seal over old material or remove it
- What product goes in the joint
- How the joint is cleaned and prepared
- How much experience the applicator has
What fire rated sealant looks like in Berwick
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Letting a property close to Berwick (Sussex) station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Berwick is about 4 miles south-west of Hailsham, in East Sussex. Berwick gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 289 places across East Sussex, large and small. You can also see our page for Brighton, about 13 miles away.
Every address in BN26 is covered for fire rated sealant, from the main roads to the quietest streets. We cover properties on Station Road, Cornford Crescent and The Village. Other places close to Berwick include Selmeston (1 mile west), Alciston (1 mile south-west), Arlington (1 mile east), Wickstreet (2 miles north-east) and Milton Street (2 miles south). Within a short drive, we also cover Eastbourne (6 miles south-east), Bexhill-on-Sea (13 miles east), Seaford (5 miles south-west), Lewes (7 miles west), Hailsham (4 miles north-east) and Crowborough (15 miles north).
Local landmarks in Berwick
Around Berwick, our work takes us to homes and buildings near The Berwick Inn. There’s a railway station in Berwick itself: Berwick (Sussex) station. Nearby you’ll also find Hellingly Hospital Railway (5.4 miles north-east) and Drusillas Museum (1.2 miles south). The countryside around Berwick includes Firle Beacon.
When it is not the sealant
It helps to know what we cannot do:
- Walls or floors that weren’t built to resist fire
- Problems with the door itself rather than the gap around the frame
- Fire risk assessments, which need a qualified assessor
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before booking.
Where we work in Berwick
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Door frames
- Linear gaps
- Flats & HMOs
Aftercare tips
After the cure time, these simple habits help:
- File the fire-stopping record where your assessor can find it
- Tell trades working in the building that fire seals must be put back
- Ask which product was used before you paint
- Include fire stopping when you schedule refits
Leave the sealant to cure fully before painting near it. Some fire-rated sealants can be painted and some cannot.
An open gap is not only a fire issue: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
Berwick questions
Can you help a landlord with a rental near Berwick (Sussex) station?
Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.
Do you cover smaller places like Berwick?
Yes. Berwick is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you do fire sealant around door frames?
Yes, where the gap suits a sealant detail. We seal the frame-to-wall gap, not the door itself and we will tell you if we spot problems with the door.
How long does fire rated sealant take?
It depends on the size of the job, but most jobs take from a few hours to a few days, depending on the number of gaps and the access. We’ll give you a better idea when we quote.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Can you seal over the old sealant?
No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Can I use normal mastic around a pipe through a fire wall?
No. It might close the gap, but it isn’t a fire-rated seal. Use a product tested for that gap and service.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Places near Berwick
More services for Berwick
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- The amount of work
- The old material and how stubborn it is
- Any working-time requirements on site
- Whether there’s mould to deal with
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will go through it with you.
Helping us quote
When you call or email, it’s useful to know:
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
- The address or postcode of the job
- Whether it has been sealed before
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will talk you through the work.