East Dunbartonshire · Scotland
Fire-rated sealant in Balmore, East Dunbartonshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Balmore and across East Dunbartonshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Fire stopping disturbed by later work
- Unsealed gaps around fire door frames
- Old fire sealant that has split or come away
Fire rated sealant in Balmore, done properly
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap, and we can record what went where. We are often asked to deal with joints picked up in a fire-stopping survey and unsealed gaps where pipes and cables go through a wall, across pipe & cable gaps, flats & HMOs and door frames.
In a smaller place like Balmore, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. All of them have washrooms, kitchens and fire-rated joints that need looking after.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Balmore (G64)
- Wider area
- East Dunbartonshire
- Guarantee
- One year on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes from a few hours to a few days, depending on the number of gaps and the access from start to finish. For a place like Balmore, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Clear the area around the work
- Mention if the joints have been sealed before
- Mention any sign-in or site rules at work premises
Getting a quote
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, send an email to info@mrmastic.co.uk.
Related advice
Balmore: your questions answered
Can you help a landlord with a rental near Bishopbriggs station?
Yes, we work for landlords and agents. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before we start.
Will you come out to Balmore?
Yes. Balmore is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
What does fire rated sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, email us at info@mrmastic.co.uk with a short description of the job.
Do you have insurance?
Yes, we are fully insured for domestic and commercial work.
Can you tell me how many minutes the seal will last?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can I add another job to the visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Will you assess my building’s fire safety?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
What fire rated sealant looks like in Balmore
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
If you look after a church, hall or community building such as Cadder Parish Church, gaps around pipes and cables are worth checking after any building work there. If you let a flat or house near Bishopbriggs station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For site and facilities teams at buildings such as Bishopbriggs Academy, service openings in fire-resisting walls need checking after any refurbishment.
Balmore is about 2 miles north-west of Bishopbriggs, in East Dunbartonshire. Whether you are in the middle of Balmore or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Our East Dunbartonshire coverage runs to 23 places, Balmore among them. Our Glasgow page covers work nearby (6 miles or so).
Jobs for fire rated sealant in G64 is quoted and booked the same way as anywhere else. We cover properties on Paterson's Laun, Old Balmore Road and Old Balmore Brae. Nearby, we also carry out fire rated sealant in Torrance (1 mile east), Bardowie (1 mile west), Cadder (1 mile south-east), Baldernock (2 miles north-west) and Bishopbriggs (2 miles south-east). We also work in nearby towns such as Kirkintilloch (4 miles east), Bearsden (4 miles west), Lenzie (3 miles east), Milngavie (3 miles west), Lennoxtown (3 miles north-east) and Milton of Campsie (3 miles north-east).
Landmarks near Balmore
Balmore’s nearest station is Bishopbriggs station, about 2.2 miles south. Well-known places in the area include Stobhill Hospital (2.9 miles south) and Barony Chambers Museum (3 miles east). For a walk, there’s Lenzie Moss and Bardowie Loch.
Towns and villages near Balmore
More services for Balmore
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Make resealing part of every contractor’s brief
- Ask which product was used before you paint
- Check risers, ceiling voids and cupboards during building checks
- Report cracked or damaged seals as soon as you notice them
Do not add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. Ask us if you’re not sure which product was used.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Get it sealed and recorded.
What we cannot put right
To be straight with you, there are a few things sealant will not fix:
- Walls or floors that weren’t built to resist fire
- Certifying a building or signing off its fire safety
- Fire risk assessments, which need a qualified assessor
If you are not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
Surfaces we seal
- Linear gaps
- Door frames
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
Why it’s worth doing now in Balmore
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own and needn’t wait for anything else. In a place like Balmore, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why us?
- Every job guaranteed for a year
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
- Quality sealants from Arbo and Everbuild
See how sealant jobs are priced and our reviews.
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
How the job changes by surface
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product and the locations noted.
Door frames
Behind most architraves is a gap between frame and wall. We seal any open gap to the product’s tested details.