Oxfordshire · England

Ascott d'Oyley Fire Rated Sealant

Intumescent and fire-rated sealant around gaps, frames and service penetrations for Ascott d'Oyley, backed by a one-year guarantee. Ask us for a quote.

  • Unsealed gaps around fire door frames
  • Holes left by a change of layout
  • Gaps where walls meet ceilings or slabs

Fire rated sealant in Ascott d'Oyley

Fire rated sealant in Ascott d'Oyley

We do not assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on plasterboard & masonry, flats & HMOs and pipe & cable gaps, and common reasons people get in touch are open gaps behind door architraves and linear gaps at the head of walls.

Somewhere as small as Ascott d'Oyley, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.

The work is covered for a year after we finish. If anything isn’t right with it, call 0345 464 0079 or send us an email.

Location
Ascott d'Oyley (OX7)
Wider area
Oxfordshire
Guarantee
12 months on all our work
Price
A clear price before we start
Telephone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

Why deal with it now?

If an assessor has flagged gaps, it makes sense to close them before the next review. Having them sealed and recorded now means you can show the action was taken. Older cottages and farmhouses around Ascott d'Oyley can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.

Why book with us

  • Full insurance on every job
  • Homes, businesses and hotels
  • More than 20 years in sealant work
  • A 12-month guarantee on all work

Take a look at our cost guide and customer reviews.

Questions from Ascott d'Oyley

Is Ascott d'Oyley in your area for fire rated sealant?

Yes. Our work covers London and the South East, and Ascott d'Oyley is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear price.

Can you help a landlord with a rental near Ascott-Under-Wychwood station?

Yes, rental work is part of what we do. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.

Do I need to be at home?

Access is agreed with you when the job is booked. Indoors, that usually means someone at home.

Can I choose the sealant colour?

We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.

What does fire rated sealant cost?

Size, access and the old material all affect the cost. Ask us for a quote.

Will we have a record of what was sealed?

Yes. We note each location and the product that went in so it’s there for the next inspection.

Can you tell me which gaps need fire stopping?

No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we will quote for the sealant work on it.

Will you leave a mess?

No. The area is protected while we work and cleaned up afterwards.

When to call us in Ascott d'Oyley

In some buildings the gap was filled with the wrong thing in the first place: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it isn’t a fire-rated seal.

It’s worth asking for a quote if you see:

  • Gaps where walls meet ceilings or slabs
  • Ordinary sealant used where a fire-rated product was needed
  • Fire seals that have cracked with movement
  • Gaps around pipes and cables through fire-resisting walls

If you look after a church, hall or community building such as Church of the Holy Trinity, older buildings that have had new heating or wiring often have service gaps worth checking.

Comparing quotes

  • How long the guarantee is
  • What happens if they find a problem under the old sealant
  • Whether they seal over old material or remove it
  • When the joint can take water or movement

Our hiring checklist

The process

We bring everything the job needs with us. Once we’ve agreed what’s being done, the area is protected and the work begins. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Ascott d'Oyley, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We go through the gaps on your list or survey and check each one’s size and substrate.
  2. Anything that is not fit for the job comes out, and the gap is cleaned.
  3. Where the tested detail needs backing or fill, we fit it.
  4. Fire-rated or intumescent sealant is applied to the right depth and tooled.
  5. Finally, we list where we worked and what we used, for your records.

Getting ready for the visit

  • Tell us about any previous sealing or DIY attempts
  • On commercial sites, let us know about site rules
  • Clear the area around the work

Getting a quote

To get a quote, call 0345 464 0079 or email us with the location and a short description of the problem. You’ll have a clear quote before work begins.

Get a quick quote

Read more

How the job changes by surface

Masonry and concrete

For masonry and concrete, we use a product tested in that substrate. We clean out dust and debris before sealing so the sealant bonds.

Flats and HMOs

Working in occupied flats needs some planning. Access to flats and common areas is agreed in advance to keep disruption down.

Should I try it myself first?

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.

Commercial buildings in Ascott d'Oyley

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.

If you let a flat or house near Ascott-Under-Wychwood station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.

Ascott d'Oyley is about 6 miles north-west of Witney, in Oxfordshire. For fire rated sealant in and around Ascott d'Oyley, please phone 0345 464 0079 or email us for a quick quote. We’re based in Crawley and cover Oxfordshire. Across Oxfordshire, we cover 443 places, Ascott d'Oyley among them. Oxford is on our list too, around 16 miles away.

All of OX7 is within our area for fire rated sealant, from the main roads to the quietest streets. If you need fire rated sealant at a property on London Lane, Heritage Lane and Maple Way or a nearby road, our applicators can take on the job. Close by, we work in Ascott-under-Wychwood (1 mile north-west), Ascott Earl (1 mile north-west), Chilson (1 mile north-east), Shipton-under-Wychwood (2 miles west) and Leafield (2 miles south-east). Within a short drive, we also cover Witney (6 miles south-east), Carterton (7 miles south), Faringdon (14 miles south), Kidlington (12 miles east), Chipping Norton (6 miles north) and St John Street area (15 miles south-east).

Near you in Ascott d'Oyley

For rail, the closest station is Ascott-Under-Wychwood station, roughly 0.5 miles north. The countryside around Ascott d'Oyley includes Blenheim Farm.

Map of Ascott d'Oyley © OpenStreetMap contributors

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • Store the list of sealed gaps with your building paperwork
  • Plan fire stopping into any work that goes through walls or floors
  • Report cracked or damaged seals as soon as you notice them
  • Take photos of fire stopping before ceilings or boxing go back

Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.

Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.

What affects the cost of fire rated sealant

We don’t publish a price list, because jobs vary so much. What we look at:

  • When we can work, for business premises
  • Any mould that needs treating
  • The number and length of the joints
  • Whether old sealant or filler has to be cut out

We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.

Helping us quote

Before you ask for a quote, have a think about:

  • The rough size of the job
  • A few pictures by email, if you can
  • Where the property is
  • How we’d reach the joints

There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or drop us an email.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job