Essex · England
Fire-rated sealant in Arkesden, Essex
Fire rated sealant for Arkesden, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Fire seals that have cracked with movement
- Unsealed gaps where pipes and cables go through a wall
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant around Arkesden
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as Church of St Mary the Virgin, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Audley End station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Arkesden is about 4 miles south-west of Saffron Walden, in Essex. Jobs in Arkesden get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our Essex coverage runs to 644 places, Arkesden among them. We also work in Chelmsford, about 22 miles from Arkesden.
We work across CB11 for fire rated sealant. Whether your property is on Clatterbury Lane, Wicken Road and Hampit Road or anywhere close by, our applicators can take on the job. We also cover the places around Arkesden: Hill Green (1 mile south), Wicken Bonhunt (1 mile south-east), Clavering (2 miles south-west), Starling's Green (2 miles south-west) and Langley (2 miles west). Within a short drive, we also cover Harlow (15 miles south), Saffron Walden (4 miles north-east), Great Dunmow (12 miles south-east), Stansted Mountfitchet (6 miles south), Newhall (15 miles south) and Elsenham (6 miles south-east).
What’s near Arkesden
Typical jobs here are in homes near Axe And Compasses Inn and the streets around them. The nearest railway station is Audley End station, about 2.3 miles north-east of the centre. Nearby you’ll also find Saffron Walden Community Hospital (4.9 miles north-east) and The Warren (4 miles west).
Fire rated sealant in Arkesden, done properly
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That is the part we focus on, one gap at a time. If you have cracked or shrunken fire-rated sealant and open joints along the top of partitions, we can help, on linear gaps, pipe & cable gaps and door frames alike.
For holiday lets, converted business premises or a community building near Arkesden, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, you get the same one-year guarantee.
- Place
- Arkesden (CB11)
- Wider area
- Essex
- Cover
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Work for landlords, hotels and businesses
Landlords and letting agents in Arkesden can book us as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
The process
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Arkesden, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Let us know if you’ve seen damp or leaks
- Mention any tricky access
How to get a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or email us.
Advice
When to call us in Arkesden
Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole round the new service is not always sealed again.
It’s worth asking for a quote if you see:
- Open gaps behind door architraves
- Seals cut through by electricians, plumbers or data installers
- Gaps filled with a product that is not fire-rated
- Unsealed gaps where pipes and cables go through a wall
Managing a site like Joyce Frankland Academy? Then fire-stopping around service openings should be restored whenever new services go in.
Questions to ask before booking
- What guarantee comes with the work
- Is the old sealant removed completely?
- Is VAT in the price?
- How the joint is cleaned and prepared
Keeping the joints in good condition
After the cure time, these simple habits help:
- Check risers, ceiling voids and cupboards during building checks
- Check whether a sealant can be painted before decorating over it
- Do not fill fire-stopping gaps with ordinary foam or silicone
- File the fire-stopping record where your assessor can find it
Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the list grows.
Common questions in Arkesden
Do you work for landlords with property near Audley End station?
Yes. We work for landlords and agents as well as homeowners. Just phone 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear quote.
Is Arkesden within the area you cover?
Yes, Arkesden is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is the work guaranteed?
Yes. Each job is guaranteed for twelve months, large or small.
What information do you need?
A short description and the location. We will ask anything else we need to know.
Do you do fire sealant around door frames?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame, and we will mention anything we notice about the door.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent ones swell in heat, and they’re one option among several. The specification and the tested detail decide which is used.
Will you assess my building’s fire safety?
No. That is for a fire risk assessor, designer or building control. Our job is applying the sealant to their specification.
How long will you be here?
A typical job takes anything from a few hours to several days, depending on how many gaps there are, including preparation and clearing up. Your quote will say how long we expect yours to take.
What the job involves on each surface
Door frames
Behind most architraves is a gap between frame and wall. We seal any open gap to the product’s tested details so the architrave can be refitted.
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in over any backing the detail calls for.
What we cannot put right
To be straight with you, there are a few things sealant won’t fix:
- Sign-off of the building, which sits with building control or your assessor
- Large holes that need a different fire-stopping system
- Assessing a building’s fire safety
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Pipe & cable gaps
- Door frames
- Linear gaps
- Plasterboard & masonry
- Flats & HMOs
- Service penetrations
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.