Buckinghamshire · England
Shreding Green External Mastic
Our applicators work in Shreding Green on sealing brickwork movement joints, render, cladding and façade joints. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Movement joints filled with mortar instead of sealant
- Joints with sealant missing in places
- Failed seals between different materials
External mastic in Shreding Green
Failed sealant is cut out, the depth set with closed-cell backing rod, and the joint resealed with a low-modulus sealant made for outside. The colour is chosen to suit the brick or render. We work on façade panels, copings & trims and concrete & block, and the jobs we see most are movement joints with cracked, split or missing sealant and water getting into walls through failed joints.
External sealant needs dry, clean surfaces, so work around Shreding Green is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
All our work is covered by a 12-month guarantee, wherever you are in Buckinghamshire.
- Where
- Shreding Green (SL0)
- Wider area
- Buckinghamshire
- Cover
- A year, on every job
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
External mastic in Shreding Green: local notes
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. With historic houses such as Windsor Castle (about 4 miles south-west) nearby, there’s older building stock in the area around Shreding Green as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
If you let a flat or house near Langley station, failed wall and movement joints let damp in, so they’re worth checking between tenancies. Schools such as The Iver Village Junior School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Shreding Green is about 3 miles east of Slough, in Buckinghamshire. We carry out external mastic for householders, landlords and businesses in Shreding Green and the surrounding area. Shreding Green is one of 263 towns and villages in Buckinghamshire where we work. There’s also a page for London, roughly 19 miles from Shreding Green.
We work across SL0 for external mastic. If you need external mastic at a property on Langley Park Road, Iverdale Close and Mansion Lane or a nearby road, our applicators can take on the job. Close by, we work in Iver (1 mile east), Richings Park (1 mile south-east), George Green (1 mile west), Middlegreen (1 mile south-west) and Langley (1 mile south-west). Further out, we also cover High Wycombe (12 miles north-west), Chesham (14 miles north), Marlow (11 miles west), Amersham (11 miles north), Beaconsfield (8 miles north-west) and Chalfont St Peter (6 miles north).
Near you in Shreding Green
We work in homes and buildings around The Red Lion pub and Langley Academy, among other places. The nearest railway station is Langley station, roughly 0.9 miles south-west of the centre. Well-known places in the area include British Airways Heritage Collection (2.2 miles north-east) and Wexham Park Hospital (2.3 miles north-west). Green spaces nearby include Uxbridge Moor.
Why deal with it now?
Water gets in through a failed movement joint. Dealing with it early keeps the repair to the joint, instead of the wall and finishes around it. Where a wall is exposed, as many are in small places like Shreding Green, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Leaving a failed joint usually makes the job bigger, not smaller. If you’re unsure, ring 0345 464 0079 or drop us an email for an honest opinion and a quote.
Why us?
- White, clear, grey or another colour, product permitting
- 180+ five-star Google reviews
- Anti-fungal sanitary silicone in wet areas
- We leave the area clean and tidy
Take a look at our cost guide and our reviews.
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Places near Shreding Green
Also in Shreding Green
How to look after the new joints
After the cure time, these simple habits help:
- Make sure movement joints aren’t pointed over
- Clear growth from the base of walls and joints
- Check external joints each spring
- Avoid pressure-washing directly into sealant joints
Avoid pressure-washing straight into the joints. A strong jet can damage the edges of the bead and let water in behind.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.
For landlords and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Common problems we fix in Shreding Green
UV, rain and frost all age exterior sealant. In time it goes hard, crazes on the surface and stops stretching, so the joint eventually tears or comes away from one side.
People normally contact us when they notice something like this:
- Joints pointed up with cement by mistake
- Gaps where render, brick and frames meet
- Weathered mastic that no longer stretches
- Joints with sealant missing in places
If you live in an older home near Church of St Peter, older walls, gutters and the joints where extensions meet them need a flexible sealant.
What to look for in a quote
- How long to leave it before use
- What happens if they find a problem under the old sealant
- How the surfaces are prepared before sealing
- Who does the work, and how experienced they are
How the job changes by surface
Concrete and blockwork
Wide joints in concrete need the depth controlling carefully. Backing rod sized to the joint sets it and keep the sealant to the right depth.
Brickwork movement joints
Clay brickwork grows slightly over its life and moves with the weather. That movement goes into the joint, so its sealant has to stay flexible.
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes anything from a few hours to several days, depending on the building, including the tidy-up. For a village or hamlet like Shreding Green, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Each joint is checked and the colour of the new sealant agreed.
- Failed sealant is removed back to clean, sound faces.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- Primer is applied wherever the sealant needs it.
- We gun in low-modulus sealant and tool it neatly.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
- Mention any parking rules near the property
Ask for a quote
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or drop us an email.
Read more
FAQs for Shreding Green
Is Shreding Green in your area for external mastic?
Yes. We work across London and the South East, and Shreding Green is part of that. Just call 0345 464 0079 or email us with a few details of the job.
Will you come out to Shreding Green?
Yes, Shreding Green is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we are fully insured.
Is it OK to fill a movement joint with cement?
No, not where the gap is a movement joint. Pointing it stops it working. A flexible sealant is the right fill.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Are you fully insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
Do you work at height?
It depends on the building. Send us pictures and a rough idea of the height and we’ll confirm how they can be reached safely.