Kent · England
External & façade joints in Scragged Oak, Kent
Sealing brickwork movement joints, render, cladding and façade joints in Scragged Oak, with a one-year guarantee on every job. Ask us for a quote.
- Cracked joints where brick meets render or frames
- Water getting into walls through failed joints
- Brick movement joints where the sealant has split
Different surfaces, different methods
Render joints
Render is weaker at the surface than brick, so a low-modulus sealant is kinder to the joint edges. We prime where the product needs it.
Joints between dissimilar materials
Where a frame or panel meets masonry, water often finds a way in. We cut out the old sealant and reseal with a product suited to both surfaces.
How we handle external mastic in Scragged Oak
Short cuts in external joints show up within a season or two. New sealant over old, joints packed with mortar and beads with no backing rarely last long. We strip the joint back and start again. If you have movement joints with cracked, split or missing sealant and weathered mastic that no longer stretches, we can put it right.
In a village or hamlet like Scragged Oak, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
All our work is covered by our 12-month guarantee.
- Where
- Scragged Oak (ME14)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlords, agents and businesses in Scragged Oak
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
How we quote for external mastic
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- The type of sealant required
- How much there is to do
Leaving a failed joint normally makes the job bigger, not smaller. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.
Asking for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- If it’s domestic, commercial or a hotel
- How we’d reach the joints
- Any previous sealing or DIY work
- Where the job is, and your postcode
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Scragged Oak questions
Can you help a landlord with a rental near Bearsted station?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Do you cover smaller places like Scragged Oak?
Yes, Scragged Oak is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
What colours does the sealant come in?
The aim is a neat, even joint in a colour that suits the wall. We will talk through colour options before we start.
Do you work at height?
Each building is different. Send us pictures and a rough idea of the height.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we’re using and why.
What is backing rod for?
The foam is closed-cell backing rod. It keeps the sealant at the right depth and bonded to the sides only.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us.
Can new sealant go over the old?
No. New silicone won’t bond to old silicone, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
Places near Scragged Oak
More services for Scragged Oak
The process
We keep the work tidy and contained to the joints we’re treating. Expect the work to take a few hours to a few days, depending on the length of joint and the access, and we tell you how long to leave it before we go. For a village or hamlet like Scragged Oak, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking each joint, agreeing the ones to redo and how we’ll reach them.
- We cut out the failed sealant and rake out any dirt or growth.
- We clean both faces of the joint and prime them where the product calls for it.
- We push in closed-cell backing rod so the sealant is the right depth and bonds to the sides only.
- A flexible exterior sealant is applied and tooled in a colour to suit the wall.
Getting ready for the visit
- Keep children and pets away from the work area
- Tell us about any previous sealing or DIY attempts
- Move anything stored near the joints
Getting a quote
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or email us.
Read more
Walls and rooflines in Scragged Oak
With historic houses such as Stoneacre (about 4.8 miles south) nearby, there’s older building stock in the area around Scragged Oak as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Homes close to Church of St Peter include some older properties, and an extension built onto an older house moves differently, and the joint between them takes the strain.
Scragged Oak is about 3 miles south-east of Chatham, in Kent. Homes, rented property, offices and hotels in Scragged Oak is covered for external mastic, old or new, large or small. Every job comes with our one-year guarantee. We cover 922 towns and villages across Kent, from the larger towns to small villages. There’s also a page for Chelmsford, roughly 29 miles from Scragged Oak.
Postcode districts we cover here for external mastic: ME14. Neighbouring places we cover for external mastic include Lower Cox Street (1 mile south-east), Kemsley Street (1 mile north), Bredhurst (1 mile north-west), Dunn Street (1 mile north-west) and Lidsing (1 mile north-west). Larger places within reach include Maidstone (5 miles south-west), Sittingbourne (6 miles east), Gravesend (12 miles north-west), Faversham (13 miles east), Northfleet (13 miles north-west) and Minster (11 miles north-east).
Landmarks near Scragged Oak
Around Scragged Oak, our work takes us to homes and buildings near Levan Strice, among other places. The closest station to Scragged Oak is Bearsted station, about 3.2 miles south. A little further out are Allington Castle (3.8 miles south-west) and KIMS hospital (2.8 miles south-west). For a walk, there’s Detling Hill and Burham Down.
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Clear growth from the base of walls and joints
- Have failed joints looked at early
- Tell anyone working on the walls about the movement joints
- Deal with leaking gutters that soak the joints below
Keep pressure washers away from the sealant. A strong jet can damage the edges of the bead and let water in behind.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.
Common problems we fix in Scragged Oak
A lot of failed joints come down to preparation: dusty or wet faces, no primer where one was needed, or old sealant left in. The new sealant then lets go long before it should.
The problems people generally mention when they call include:
- Moss and dirt in joints with no sealant left
- Sealant that has lost its bond to the brick or render
- Failed seals between different materials
- Rigid filler in a joint that should flex
Letting a property close to Bearsted station? Then failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Comparing quotes
- What insurance they hold
- Who turns up on the day
- What guarantee comes with the work
- What the quote includes, VAT included or not
What sealant work cannot fix
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- Subsidence or other structural problems
- Adding movement joints to masonry that has none
- Cracked brickwork or render that needs a builder or plasterer
If you are not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Surfaces we seal
- Brickwork movement joints
- Copings & trims
- Concrete & block
- Render & cladding joints
- Joints between brick and frames
- Façade panels