Oxfordshire · England
External & façade joints in Salford, Oxfordshire
Problem with your movement joints in Salford? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Water getting into walls through failed joints
- Joints where the bead has come unstuck
- Weeds or debris growing in open joints
How the job changes by surface
Brickwork movement joints
Clay brickwork grows slightly over its life and moves with the weather. That movement goes into the joint, so its sealant has to stay flexible.
Render joints
Render has movement joints and stop beads that need sealing. They’re resealed in a sealant that suits the render.
External mastic in Salford
For buildings in Salford, we reseal external joints of all kinds, from brick movement joints to cladding panels. Every joint gets the same careful preparation: clean joint faces and the right depth. Typical jobs include gaps where render, brick and frames meet and sealant pulling away from one side of the joint, across brickwork movement joints, concrete & block and copings & trims.
Older homes in small places like Salford may be stone, brick or timber-framed, often with later extensions. The joints where those materials meet are the weak points.
Whatever the size of the job, you get the same 12-month guarantee in Salford and across Oxfordshire.
- Place
- Salford (OX7)
- Region
- Oxfordshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
Before you book, it’s worth knowing the limits too:
- Cutting new joints into brickwork, which is building work rather than sealant work
- Render that’s blown, hollow or coming away
- Cracking across the wall rather than at a joint
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think before you book.
Surfaces we seal
- Brickwork movement joints
- Joints between brick and frames
- Render & cladding joints
- Façade panels
- Copings & trims
- Concrete & block
Common problems we fix in Salford
Using the wrong sealant is another common reason. A high-modulus or general-purpose sealant can be too rigid for a busy joint, so it pulls away from the edges.
Any of these means the joints need attention:
- Failed seals between different materials
- Failed sealant between panels on a façade
- Weeds or debris growing in open joints
- Joints with sealant missing in places
Letting a property close to Kingham station? Then failed wall and movement joints let damp in, so they’re worth checking between tenancies.
What to look for in a quote
- Which sealant they’ll use, and why
- How the surfaces are prepared before sealing
- How the colour is chosen
- Are they insured?
Landlord and commercial work in Salford
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
If you manage several properties in or around Salford, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
What affects the cost of external mastic
You’ll get a clear quote before work begins. It takes into account:
- How much old sealant there is and how hard it is to remove
- How easy the joints are to reach
- The size of the job
- How many areas need sealing
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Asking for a quote
You do not need to know the technical terms. It helps if you can tell us:
- The type of property
- The problem you’ve noticed
- A few pictures by email, if you can
- Any previous sealing or DIY work
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.
What external mastic looks like in Salford
With historic houses such as Chastleton House (about 2.6 miles west) nearby, there’s older building stock in the area around Salford as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Managing a site like Chipping Norton School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. In the older streets around Church of St Mary, an extension built onto an older house moves differently, and the joint between them takes the strain.
Salford is about 12 miles north of Witney, in Oxfordshire. Whether you are in the middle of Salford or further out, external mastic is available for homes and businesses alike. Across Oxfordshire, we cover 443 places, Salford among them. Oxford is on our list too, around 20 miles away.
We work across OX7 for external mastic and the streets around it. Streets in the area include Roses Lane, Orchard Close and Cooks Lane, and we cover them all. Neighbouring places we cover for external mastic include Over Norton (2 miles east), Chipping Norton (2 miles south-east), Churchill (3 miles south), Sarsden (3 miles south) and Great Rollright (3 miles north-east). Within a short drive, we also cover Banbury (13 miles north-east), Witney (12 miles south), Carterton (13 miles south), Kidlington (15 miles south-east), Neithrop (12 miles north-east) and Grimsbury (14 miles north-east).
Near you in Salford
In Salford, that means homes and buildings near The Black Horse pub and the streets around them. The nearest railway station is Kingham station, roughly 3.9 miles south-west. A little further out are Wheelbarrow Castle (2.4 miles north-west) and Chipping Norton Museum of Local History (1.6 miles east).
Keeping the joints in good condition
Looking after new joints is easy:
- Clear growth from the base of walls and joints
- Leave the joints unpainted unless we have said otherwise
- Tell anyone working on the walls about the movement joints
- Avoid pressure-washing directly into sealant joints
Don’t paint over the new sealant unless we’ve said the product is paintable. Many exterior sealants are not designed to be painted and spoil the finish.
If you can see gaps, plants or bare sections in a joint, have it checked. Early work is quicker and leaves a better finish.
How it works
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes a few hours to a few days, depending on the length of joint and the access, including the tidy-up. For a village or hamlet like Salford, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by walking round the building and agreeing the joints and the access.
- We cut out the old mastic and rake out anything in the joint.
- Joint faces are cleaned back and primed if the sealant needs it.
- We fit closed-cell backing rod to control the depth.
- We apply the sealant, tool it and check the whole run.
Getting ready for the visit
- Mention any tricky access
- Tell us about any water getting in
- Tell us if parking is tricky
Getting a quote
We do not publish a price list. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or drop us an email.
Read more
Places near Salford
What else we do in Salford
Common questions in Salford
Is Salford within the area you cover?
Yes, Salford is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do external mastic in Salford?
Yes. Our work covers London and the South East, and Salford is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we will give you a clear quote.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
What colours does the sealant come in?
The aim is a neat, even joint in a colour that suits the wall. Colour is agreed with you before we begin from the range available.
Do you have insurance?
Yes. We’re fully insured, and we can confirm the details when we quote.
Can a movement joint be filled with mortar?
No. A mortar-filled joint can’t move, so the movement cracks the wall elsewhere. Use a flexible sealant with backing rod.
Where are you based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.