Oxfordshire · England
External & façade joints in Ruscote, Oxfordshire
Problem with your movement joints in Ruscote? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Joints with sealant missing in places
- Sealant that has lost its bond to the brick or render
- Failed sealant between panels on a façade
About our external mastic in Ruscote
Many failed façade joints only get noticed once there’s a stain or a damp patch inside. We inspect them, agree which need doing and reseal with a weatherproof, flexible sealant in a matching colour. If you are dealing with sealant that has lost its bond to the brick or render and hard, crazed mastic that has stopped moving, we can help, on joints between brick and frames, brickwork movement joints and concrete & block alike.
In and around Ruscote, older properties sit alongside newer ones, each with its own outside joints. Older homes need their gutter and trim joints kept tight, newer ones their movement joints.
We stand behind the work with a 12-month guarantee.
- Place
- Ruscote (OX16, OX15)
- Wider area
- Oxfordshire
- Guarantee
- One year on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How the visit works
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a few hours to a few days, depending on the length of joint and the access. In a smaller place like Ruscote, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We look at every joint and agree a colour to suit the wall.
- We take out the old sealant until the faces are sound.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- We prime the faces where required.
- A low-modulus exterior sealant is gunned in and tooled to a neat finish.
How to prepare
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
Get a quote
To get a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Advice
When to call us in Ruscote
If plants are growing out of a joint, the sealant has generally failed or was never there. Dirt and roots then trap moisture in the joint.
It’s worth asking for a quote if you see:
- Rigid filler in a joint that should flex
- Water getting into walls through failed joints
- Gaps where render, brick and frames meet
- Joints where the bead has come unstuck
If you let a flat or house near Banbury station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.
What your quote should include
- What preparation is included
- The length of the guarantee
- Is the old sealant removed completely?
- What the cure time is
Different surfaces, different methods
Joints between dissimilar materials
Joints where frames, sills or panels meet the wall are common leak points. We cut out the old sealant and reseal with a product suited to both surfaces.
Brickwork movement joints
Brick movement joints are often mistaken for a missing mortar line. Where one has been mortared, we cut it out and reseal it with sealant.
Also in Ruscote
Ruscote buildings and the weather
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Broughton Castle (about 1.8 miles south-west) are a reminder that the area around Ruscote has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
Homes close to St Paul's Church Centre include some older properties, and old and new materials meet at the roofline and walls, which is where sealant earns its keep. Managing a site like St Joseph's Catholic Primary School? Then larger buildings have long runs of movement joint that eventually need resealing.
Ruscote is about 1 mile west of Banbury, in Oxfordshire. Whether you’re in the middle of Ruscote or further out, we cover external mastic for every kind of property. Ruscote is one of 443 places in Oxfordshire where we work for external mastic. We also work in Oxford, around 22 miles away.
Every address in OX16 and OX15 is covered for external mastic. You’ll find streets such as Abbey Road, Lunnun Road and Bailey Road. Nearby, we also carry out external mastic in Neithrop (1 mile north), Banbury (1 mile east), Drayton (1 mile north-west), North Newington (1 mile west) and Broughton (2 miles south-west). We also work in nearby towns such as Bicester (14 miles south-east), Bure Park (14 miles south-east), Chipping Norton (11 miles south-west), Woodstock (15 miles south), Bloxham (3 miles south) and Charlbury (14 miles south).
Local landmarks in Ruscote
Locally, jobs take us to homes and businesses close to North Oxfordshire Academy, Admiral Holland pub and Drayton School. The closest station to Ruscote is Banbury station, roughly 1.5 miles east. Nearby you’ll also find W. O. Bentley Memorial Foundation (2.4 miles north-west) and Castle Quay Shopping Centre (1.2 miles east). Not far away are Farthinghoe Nature Reserve and Crouch Hill.
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We work for landlords and agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
How to look after the new joints
Simple care keeps the joints in good condition. Our advice:
- Point out the joints to other trades
- Ask before painting over external sealant
- Keep high-pressure jets off the joints
- Never let anyone fill a movement joint with mortar
Keep the joints clear of soil, plants and climbing growth. Damp material against the sealant shortens its life.
If you can see gaps, plants or bare sections in a joint, have it checked. Early work is quicker and leaves a better finish.
Ruscote: your questions answered
I let a flat near Banbury station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
Is Ruscote within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How long does the job take?
That depends on the amount of work, but as a guide it takes a few hours to a few days, depending on the length of joint and the access. We’ll tell you when we quote.
Do the sealants smell?
Possibly a little. It fades as the sealant cures.
How often do external joints need resealing?
That varies with the weather the wall faces, how much it moves and the sealant used. Sealant is a maintenance item, so check the joints once a year and reseal when it splits.
How long before the joint can be used?
Cure times vary by product and the conditions. We tell you how long to leave it before we go.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or drop us an email.
Why is there a gap in my brick wall?
It’s a deliberate gap that lets the wall expand and contract without cracking. It’s sealed with a flexible sealant, not mortar.
Why deal with it now?
The longer a joint stays open, the more water the wall takes in. In cold weather, frost can damage wet brick and render around the joint, so the problem grows beyond the joint itself. In an older home around Ruscote, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
What you get with us
- We leave the area clean and tidy
- A 12-month guarantee on all work
- Domestic, commercial and hotel work
- We’re fully insured
Honest limits
We will not take on work that won’t last, so here’s what sealant can’t put right:
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
- Loose or hollow render, which needs re-rendering
- Adding movement joints to masonry that has none
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly before booking.
What we seal
- Joints between brick and frames
- Brickwork movement joints
- Copings & trims
- Render & cladding joints
- Concrete & block
- Façade panels