Kent · England
External Mastic in Pipsden
We cover Pipsden for sealing brickwork movement joints, render, cladding and façade joints. Old sealant removed completely, joints prepared properly.
- Weathered mastic that no longer stretches
- Moss and dirt in joints with no sealant left
- Cracked joints where brick meets render or frames
External mastic in Pipsden
On houses, flats and commercial buildings across Pipsden, we reseal joints in brickwork, render, cladding and façade panels. The preparation is the same whatever the wall: clean, sound faces and a controlled depth. Common call-outs are for cracked joints where brick meets render or frames and damp patches traced to an open external joint, across brickwork movement joints, joints between brick and frames and render & cladding joints.
Outside joints can only be sealed when they’re dry, so work in Pipsden is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Pipsden (TN18)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Why deal with it now?
An open joint keeps letting water into the wall with every downpour. In cold weather, frost can damage wet brick and render, so the problem grows beyond the joint itself. Around Pipsden, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or email us for an honest opinion and a quote.
Why Pipsden customers choose us
- Homes, businesses and hotels
- Anti-fungal sanitary silicone in wet areas
- A sealant colour to suit the surroundings
- 20+ years of sealant experience
Read what affects the cost or what customers say.
Quotes for external mastic in Pipsden
Every job gets its own quote. This is what makes a difference:
- The product the joint needs
- The amount of work
- The old material and how stubborn it is
- Access and height
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- Access, such as stairs, a lift or height
- The rough size of the job
- The type of property
- Where the job is, and your postcode
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you are ready, phone 0345 464 0079 or email us.
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll quote.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Keep movement joints as flexible joints, not mortar
- Check the sealant is paintable before painting near it
- Keep water from gutters off the wall
- Have failed joints looked at early
Give the sealant the cure time we tell you before anything rubs against it. Most exterior sealants skin fast but take longer to cure right through.
If you can see gaps, plants or bare sections in a joint, have it checked. Earlier resealing means a smaller job and a better result.
Towns and villages near Pipsden
Other services in Pipsden
Surface by surface
Joints between dissimilar materials
Brick against render, concrete against metal, stone against timber: every change of material is a joint. A flexible sealant bridges the two so the movement is taken up.
Copings and trims
A failed coping joint lets water into the top of the wall. Sealing them early saves the wall below.
What external mastic looks like in Pipsden
Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Great Dixter (about 4.3 miles south-east) nearby, there’s older building stock in the area around Pipsden as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
Schools such as Hawkhurst Church of England Primary School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. Rented homes near Etchingham station change hands often, and outside joints that have cracked can let damp into a rental, so check them between lets. Homes close to Church of All Saints include some older properties, and an extension built onto an older house moves differently, and the joint between them takes the strain.
Pipsden is about 12 miles north of Hastings, in Kent. Pipsden gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Across Kent, we cover 922 places, and Pipsden is one of them. There’s also a page for Crawley, roughly 31 miles from Pipsden.
Work in TN18 works the same way as everywhere else we cover. Whether your property is on Rye Road and Water Lane or a nearby road, we can help. Other places close to Pipsden include Four Throws (1 mile south-east), Little Conghurst (1 mile south), Hawkhurst (1 mile west), The Moor (1 mile south-west) and Beal's Green (1 mile north-west). We also work in nearby towns such as Maidstone (15 miles north), Royal Tunbridge Wells (13 miles north-west), Tonbridge (15 miles north-west), Paddock Wood (11 miles north-west), Tenterden (7 miles east) and Southborough (14 miles north-west).
What’s near Pipsden
Locally, jobs take us to homes and businesses close to Collingwood Nature Reserve, Oak And Ivy Public House and Marlborough House School, among other places. The nearest railway station is Etchingham station, about 4.4 miles south-west of the centre. Well-known places in the area include Benenden Hospital (4.9 miles north-east).
The process
All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take anything from a few hours to several days, depending on the building. For a village or hamlet like Pipsden, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Each joint is checked and the colour of the new sealant agreed.
- We take out the old sealant until the faces are sound.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- We prime the faces where required.
- We gun in low-modulus sealant and tool it neatly.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Mention any sign-in or site rules at work premises
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
If you’re in Pipsden and need external mastic, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before work begins.
Advice
Pipsden questions
I let a flat near Etchingham station. Can you help?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.
Is Pipsden in your area for external mastic?
Yes, Pipsden is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear price.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we are using.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Do you have insurance?
Yes. We are fully insured, and we’ve been doing sealant work for more than 20 years.
Can you seal joints between two different materials?
Yes. Joints between dissimilar materials are a big part of external work. We use a flexible sealant suited to both surfaces with primer where required.
Can a movement joint be filled with mortar?
No. A mortar-filled joint can’t move, so the movement cracks the wall elsewhere. It needs a flexible sealant over backing rod.
What information do you need?
Let us know what needs doing and where, with photos by email if possible. If we need more, we’ll ask.