Kent · England

Nettlestead Green External Mastic

Sealing brickwork movement joints, render, cladding and façade joints in Nettlestead Green, with a one-year guarantee on every job. Call for a quick quote.

  • Panel joints letting water in
  • Plants rooting in failed movement joints
  • Sealant that has lost its bond to the brick or render

External mastic in Nettlestead Green

External mastic in Nettlestead Green, done properly

For buildings in Nettlestead Green, we reseal external joints of all kinds, from brick movement joints to cladding panels. The preparation is the same whatever the wall: clean, sound faces and a controlled depth. Common call-outs are for brick movement joints where the sealant has split and damp patches traced to an open external joint, across copings & trims, façade panels and render & cladding joints.

In a village or hamlet like Nettlestead Green, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.

A 12-month guarantee comes as standard, so you are covered after we’ve gone.

Where
Nettlestead Green (ME18)
Wider area
Kent
Guarantee
12 months on all our work
Quote
Quoted before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

DIY versus a professional finish

The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.

Landlord and commercial work in Nettlestead Green

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.

What the job involves on each surface

Brickwork movement joints

People sometimes point up a brick movement joint by mistake. If that is happened, we rake it out and reseal it properly.

Joints between dissimilar materials

Brick against render, concrete against metal, stone against timber: every change of material is a joint. We seal the joint with a flexible exterior sealant so the movement is taken up.

How the visit works

We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours to a few days, depending on the length of joint and the access. Somewhere as small as Nettlestead Green, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We start by walking round the building and agreeing the joints and the access.
  2. We cut out the old mastic and rake out anything in the joint.
  3. The faces are brushed clean and primed where the product requires it.
  4. We fit closed-cell backing rod to control the depth.
  5. We apply the sealant, tool it and check the whole run.

Getting ready for the visit

  • For indoor joints, keep the area dry beforehand if you can
  • For business premises, tell us about site rules or sign-in
  • Let us know if you’ve seen damp or leaks

Get a quote

There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or drop us an email.

Get a quick quote

Related advice

When something else is needed

We’ll always be straight with you, so here’s what sealant cannot fix:

  • Rising or penetrating damp from elsewhere in the wall
  • Cracking across the wall rather than at a joint
  • Subsidence or other structural problems

If you’re not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.

Surfaces we seal

  • Joints between brick and frames
  • Render & cladding joints
  • Brickwork movement joints
  • Concrete & block
  • Façade panels
  • Copings & trims

External mastic in Nettlestead Green: local notes

The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like Old Soar Manor (about 4.3 miles north-west) are a reminder that the area around Nettlestead Green has older buildings as well as new. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material.

Rented homes near Yalding station change hands often, and split movement joints are easy to miss on a rental until damp shows inside. For an older house near a landmark such as St Mary's Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.

Nettlestead Green is about 6 miles south-west of Maidstone, in Kent. Wherever you are in the ME18 postcode area, we cover external mastic for homes and businesses. Nettlestead Green is one of 922 places in Kent we cover. For nearby work, see our Crawley page (27 miles or so).

Jobs for external mastic in ME18 works the same way as everywhere else we cover. Streets in the area include Station Road, Maidstone Road and Hampstead Lane, all of which we cover. Nearby, we also carry out external mastic in Nettlestead (1 mile north), Yalding (1 mile south-east), Congelow (1 mile south-east), Wateringbury (2 miles north-east) and Benover (2 miles south-east). We also work in nearby towns such as Maidstone (6 miles north-east), Sevenoaks (10 miles west), Royal Tunbridge Wells (9 miles south-west), Gravesend (14 miles north), Tonbridge (6 miles south-west) and Northfleet (14 miles north).

What’s near Nettlestead Green

The nearest railway station is Yalding station, roughly 0.5 miles south-east of the centre. Other landmarks nearby include Leybourne Castle (5 miles north) and Teapot Island (0.9 miles south-east).

Map of Nettlestead Green © OpenStreetMap contributors

Looking after it afterwards

Aftercare is simple:

  • Avoid pressure-washing directly into sealant joints
  • Point out the joints to other trades
  • Have failed joints looked at early
  • Check the sealant is paintable before painting near it

Do not let soil, plants or ivy build up against the new joints. Damp material against the sealant shortens its life.

Act while the splits are small. At that stage it’s a simple cut out and reseal with no damage behind it to deal with.

Nettlestead Green questions

Do you work for landlords with property near Yalding station?

Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear price.

Is Nettlestead Green within the area you cover?

Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Can you work on commercial sites?

Yes. Hotels, offices and other businesses use us and we are fully insured.

Can you seal over the old sealant?

No, because it fails. The old sealant always comes out first.

How do you reach high-level joints?

That depends on how high the joints are and the ground below. Ground-floor joints are simple; for higher work, tell us about the building and we will confirm what’s needed.

What do you put in the joint?

We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.

Is it OK to fill a movement joint with cement?

No. Rigid materials can’t move with the wall, so the joint stops doing its job. Where a joint has been mortared, it can often be raked out and sealed properly.

Can you seal joints between two different materials?

Yes. The old joint is removed, both surfaces cleaned and primed where needed, and a flexible sealant applied. We pick a colour that works with both materials.

What affects the cost of external mastic

The price is agreed before any work begins. It takes into account:

  • Access and height
  • Whether old sealant or filler has to be cut out
  • Working hours on commercial sites
  • How many areas need sealing

Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.

What to tell us for a quote

Photos help, but a description is a good start. Try to tell us:

  • How we’d reach the joints
  • If it’s domestic, commercial or a hotel
  • The address or postcode of the job
  • If someone has resealed it before

If you are in Nettlestead Green and need external mastic, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job