Essex · England
External & façade joints in Maylandsea, Essex
Sealing brickwork movement joints, render, cladding and façade joints for homeowners, landlords and businesses in Maylandsea. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Sealant pulling away from one side of the joint
- Weeds or debris growing in open joints
- Rigid filler in a joint that should flex
The process
The work is kept neat and contained to the area we are working on. Expect the work to take anything from a few hours to several days, depending on the building, and we tell you how long to leave it before we go. In a small place like Maylandsea, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking each joint, agreeing the ones to redo and how we will reach them.
- We cut out the failed sealant and rake out any dirt or growth.
- We clean both faces of the joint and prime them where the product calls for it.
- We push in closed-cell backing rod so the sealant is the right depth and bonds to the sides only.
- A flexible exterior sealant is applied and tooled in a colour to suit the wall.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Let us know about stairs, lifts or work at height
- Mention if the joints have been sealed before
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, ring 0345 464 0079 or drop us an email.
Related advice
How we handle external mastic in Maylandsea
Where two different materials meet, such as brick and render or blockwork and metal, they move at different rates. A flexible sealant bridges the two where mortar or filler would crack. If you are dealing with joints with sealant missing in places and sealant pulling away from one side of the joint, we can put it right.
Outside joints can only be sealed when they’re dry, so work in Maylandsea is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.
We stand behind the work with a 12-month guarantee.
- Where
- Maylandsea (CM3)
- Wider area
- Essex
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Leave it or put it right?
Resealing a run of joints in one go is usually better than patching one at a time. Joints of the same age tend to fail together, and access only has to be arranged once. Where a wall is exposed, as many are in small places like Maylandsea, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or send us an email and we will talk you through it.
What you get with us
- A sealant colour to suit the surroundings
- Over 20 years’ experience
- Trusted Arbo and Everbuild sealants
- Full insurance on every job
Take a look at what affects the cost and customer reviews.
More services for Maylandsea
When to call us in Maylandsea
Joints sealed without backing rod, or far too deep, rarely last. Sealant bonded to three sides has nowhere to go and tears as soon as the joint widens.
Common reasons people contact us include:
- Joints pointed up with cement by mistake
- Plants rooting in failed movement joints
- Movement joints with cracked, split or missing sealant
- Failed sealant between panels on a façade
If you look after a building such as Maylandsea Primary School, its movement joints, gutters and trims need looking after like any other building’s.
What to look for in a quote
- Who does the work, and how experienced they are
- What product goes in the joint
- Whether all the old sealant comes out first
- Are they insured?
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Maylandsea: your questions answered
Is external mastic in a coastal place like Maylandsea any different?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. The right product, a clean joint and the right depth all help it cope.
Do you work for landlords with property near Althorne station?
Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Will the new joint stand out?
There’s a good range of exterior colours, including greys, browns, whites and stone tones. We choose the closest to your brick or render so the joint does not draw the eye.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
Do you take out the old sealant first?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
How long should I leave it?
Different products cure at different speeds, so follow the cure time we give you.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
What external mastic looks like in Maylandsea
Maylandsea is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on movement joints and outside wall joints, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you let a flat or house near Althorne station, outside joints that have cracked can let damp into a rental, so check them between lets.
Maylandsea is about 4 miles south-east of Maldon, in Essex. Maylandsea gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Maylandsea is one of 644 towns and villages in Essex we cover for external mastic. Our Chelmsford page covers work nearby, about 12 miles away.
Every address in CM3 is within our area for external mastic, from the main roads to the quietest streets. External mastic is available to properties on Marine Parade, Imperial Avenue and The Esplanade and the roads around them. We also cover Mayland (1 mile south-east), Latchingdon (2 miles south-west), Mundon (2 miles west), Althorne (2 miles south) and Ostend (4 miles south-east). Further out, we also cover Colchester (15 miles north-east), Chelmsford (12 miles west), Basildon (15 miles south-west), Maldon (4 miles north-west), Canvey Island (14 miles south-west) and Billericay (15 miles west).
What’s near Maylandsea
The closest station to Maylandsea is Althorne station, roughly 2.8 miles south of the centre. For a walk, there’s Northey Island.
What affects the quote in Maylandsea
Some jobs are bigger than they look, and some smaller. The main factors:
- Working hours on commercial sites
- The number and length of the joints
- Whether there’s mould to deal with
- The number of rooms or windows
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- The address or postcode of the job
- Access, such as stairs, a lift or height
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
Getting a quote is simple: let us know what needs doing and where and its rough size. Photos by email help us understand the job, and we will take it from there.
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Clear growth from the base of walls and joints
- Point out the joints to other trades
- Keep high-pressure jets off the joints
- Act on the first splits you see
Give the sealant the cure time we tell you before anything rubs against it. The surface skins over quickly, but full cure takes longer.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.