West Berkshire · England
External & façade joints in Hyde End, West Berkshire
Problem with your movement joints in Hyde End? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Rain getting behind render or cladding at a joint
- Plants rooting in failed movement joints
- Sealant that has lost its bond to the brick or render
External mastic for homes and businesses in Hyde End
We cut out failed sealant, set the joint depth with closed-cell backing rod and reseal with a low-modulus exterior sealant. The colour is chosen to suit the brick or render so the line blends in. We work on joints between brick and frames, brickwork movement joints and concrete & block, and common reasons people get in touch are failed sealant between panels on a façade and movement joints with cracked, split or missing sealant.
In a village or hamlet like Hyde End, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.
- Place
- Hyde End (RG7)
- Region
- West Berkshire
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Walls and rooflines in Hyde End
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Letting a property close to Midgham station? Then outside joints that have cracked can let damp into a rental, so check them between lets. For site and facilities teams at buildings such as Brimpton C.E. Primary School, larger buildings have long runs of movement joint that eventually need resealing.
Hyde End is about 3 miles south-east of Thatcham, in West Berkshire. Hyde End gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 155 places in West Berkshire are on our list, large and small. For nearby work, see our Reading page, about 11 miles away.
Our applicators cover all of RG7 for external mastic and the streets around it. We also cover Crookham (1 mile north-west), Goose Hill (1 mile south-west), Ashford Hill (1 mile south), Mill Green (2 miles west) and Fair Oak (2 miles south). Larger places within reach include Newbury (5 miles west), Thatcham (3 miles north-west), Burghfield Common (7 miles east), Speenhamland (6 miles north-west), Hungerford (14 miles west) and Spencers Wood (10 miles east).
Around Hyde End
We work in homes and buildings around The Hurst School and The Travellers Friend pub, among other places. Hyde End’s nearest station is Midgham station, about 2.1 miles north-east of the centre. Well-known places in the area include Old Chapel Textile Centre (3.1 miles west) and West Berkshire Community Hospital (4.3 miles north-west). Green spaces nearby include Thatcham Reed Beds.
Landlord and commercial work in Hyde End
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
How the visit works
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes anything from a few hours to several days, depending on the building. For a village or hamlet like Hyde End, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by checking each joint, agreeing the ones to redo and how we’ll reach them.
- Old sealant and any debris are cut and raked out.
- We clean both faces of the joint and prime them where the product calls for it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- We gun in a flexible exterior sealant in a colour that suits the wall and tool it neatly.
How to prepare
- Let us know about parking restrictions
- Move anything stored near the joints
- Mention if the joints have been sealed before
Get a quote
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll explain what’s involved and send you a clear quote.
Advice
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
FAQs for Hyde End
Do you cover Hyde End for external mastic?
Yes, Hyde End is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
Can you help a landlord with a rental near Midgham station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Will the new joint stand out?
The sealant colour is picked to suit the wall. There’s a wide choice of exterior colours.
Do you seal joints where cladding meets other materials?
Yes. We cut out the old sealant, prepare both faces and reseal with a flexible exterior product. We pick a colour that works with both materials.
Do you have insurance?
Yes. We’re fully insured, and we have been doing sealant work for more than 20 years.
Is the work guaranteed?
Yes, for a year. If there’s a problem with our work in that time, tell us and we’ll put it right.
Why do you put foam in the joint first?
Backing rod goes into deeper joints as a matter of course. It sets the sealant depth and prevents three-sided bonding.
Surface by surface
Copings and trims
A failed coping joint lets water into the top of the wall. Sealing them early saves the wall below.
Joints between dissimilar materials
Each side of the joint may need its own preparation. Both surfaces are cleaned and primed as the product requires.
Signs you need external mastic in Hyde End
Buildings move more than people expect. Brickwork grows a little over the years, blockwork and concrete shrink, and all of it moves with heat and moisture. The sealant in the movement joints takes that strain.
Most people get in touch after spotting something like this:
- Rigid filler in a joint that should flex
- Sealant that has lost its bond to the brick or render
- Weathered mastic that no longer stretches
- Failed seals between different materials
In the older streets around Church of St Peter, an extension built onto an older house moves differently, and the joint between them takes the strain.
What to look for in a quote
- Whether you can choose the colour
- Who turns up on the day
- How hidden problems are handled
- Are they insured?
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Deal with leaking gutters that soak the joints below
- Have failed joints looked at early
- Keep soil, plants and ivy away from the joints
- Tell anyone working on the walls about the movement joints
Keep the joints clear of soil, plants and climbing growth. Damp material against the sealant shortens its life.
Act while the splits are small. At that stage it’s a simple cut out and reseal.
When it is not the sealant
We will not take on work that won’t last, so these are the limits:
- Rising or penetrating damp from elsewhere in the wall
- Cracks in the bricks or render themselves, away from the joints
- Failed render or damaged cladding panels
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Concrete & block
- Façade panels
- Joints between brick and frames
- Render & cladding joints
- Copings & trims
- Brickwork movement joints