Kent · England
External & façade joints in Goose Green, Kent
Our applicators work in Goose Green on sealing brickwork movement joints, render, cladding and façade joints. Old material cut out, joints cleaned and sealed neatly.
- Joints pointed up with cement by mistake
- Leaking joints around cladding and façade panels
- Cracked joints where brick meets render or frames
External mastic in Goose Green
Short cuts in external joints show up within a season or two. New sealant over old, joints packed with mortar and beads with no backing rarely last long. We take the old material out and do it properly. If you’re dealing with sealant pulling away from one side of the joint and cracked joints where brick meets render or frames, we can help, whatever the surface.
Outside joints can only be sealed when they’re dry, so work in Goose Green is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.
Every job is covered by our 12-month guarantee, wherever you are in Kent.

- Place
- Goose Green (TN11)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Copings and trims
Metal and stone copings both move with temperature, so a flexible sealant suits them best.
Render joints
Render has movement joints and stop beads that need sealing. We reseal them with a flexible exterior sealant that suits the render colour.
Landlords, agents and businesses in Goose Green
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
Letting agents and landlords in Goose Green can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Why act early in Goose Green
An open joint keeps letting water into the wall with every downpour. Wet masonry is more easily damaged by frost, so the problem grows beyond the joint itself. Where a wall is exposed, as many are in small places like Goose Green, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, phone 0345 464 0079 or send us an email for an honest opinion and a quote.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- 180+ five-star Google reviews
- We never seal over old sealant
- Fully insured
See our cost guide or customer reviews.
Places near Goose Green
Other services in Goose Green
Common problems we fix in Goose Green
Sometimes a movement joint was filled with mortar or a rigid filler, often by someone who didn’t know what it was for. With the joint locked solid, the movement turns into cracks elsewhere in the wall.
Most people get in touch after spotting something like this:
- Weathered mastic that no longer stretches
- Panel joints letting water in
- Moss and dirt in joints with no sealant left
- Joints pointed up with cement by mistake
Letting a property close to Yalding station? Then split movement joints are easy to miss on a rental until damp shows inside.
Before you book anyone
- How hidden problems are handled
- Is the old sealant removed completely?
- Whether VAT is included
- The length of the guarantee
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Goose Green buildings and the weather
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. With historic houses such as Old Soar Manor (about 2.5 miles north-west) nearby, there’s older building stock in the area around Goose Green as well as newer homes. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material.
In the older streets around Church of St Dunstan, old and new materials meet at the roofline and walls, which is where sealant earns its keep. For site and facilities teams at buildings such as Hadlow Primary School, its movement joints, gutters and trims need looking after like any other building’s.
Goose Green is about 4 miles north-east of Tonbridge, in Kent. For external mastic in and around Goose Green, please phone 0345 464 0079 or email us for a quick quote. We are based in Crawley and cover Kent, Goose Green included. Our Kent coverage runs to 922 places, and Goose Green is one of them. For nearby work, see our Crawley page, about 25 miles away.
Jobs for external mastic in TN11 is quoted and booked the same way as anywhere else. Nearby, we also carry out external mastic in Hadlow (1 mile south-west), West Peckham (1 mile north), Peckham Bush (1 mile south-east), Swanton (2 miles north) and Golden Green (2 miles south). Within a short drive, we also cover Maidstone (8 miles east), Sevenoaks (8 miles north-west), Royal Tunbridge Wells (8 miles south-west), Gravesend (14 miles north), Tonbridge (4 miles south-west) and Northfleet (14 miles north).
Landmarks near Goose Green
Typical jobs here are in homes near The Harrow pub, Hadlow Rural Community School and Hadlow College and the streets around them. The closest station to Goose Green is Yalding station, roughly 2.5 miles east. Well-known places in the area include Tonbridge Castle (4.4 miles south-west) and Tonbridge Cottage Hospital (5.3 miles south-west).
What sealant work can’t fix
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- Rising or penetrating damp from elsewhere in the wall
- Walls that need new movement joints cut into them
- Cracking across the wall rather than at a joint
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
What we seal
- Façade panels
- Brickwork movement joints
- Render & cladding joints
- Concrete & block
- Joints between brick and frames
- Copings & trims
Goose Green: your questions answered
Do you cover Goose Green for external mastic?
Yes, Goose Green is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and let us know what needs doing.
Will you come out to Goose Green?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is the work guaranteed?
Yes, always. There’s a 12-month guarantee on every job.
When is the sealant fully cured?
That depends on the sealant used, so please follow the time we give you when we finish.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before resealing.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we are using and why.
What we do, step by step
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a few hours to a few days, depending on the length of joint and the access. Somewhere as small as Goose Green, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We inspect the joints and agree which need resealing and how they’ll be reached.
- Old sealant and any debris are cut and raked out.
- The joint faces are cleaned and primed where the sealant needs it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- The new sealant, chosen to suit the brick or render, is applied and tooled to a neat finish.
How to prepare
- Clear items away from the joints we are working on
- Mention any tricky access
- Tell us about any water getting in
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
