Kent · England
External & façade joints in Bridge, Kent
Our applicators work in Bridge on sealing brickwork movement joints, render, cladding and façade joints. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Brick movement joints where the sealant has split
- Panel joints letting water in
- Sealant pulling away from one side of the joint
External mastic in Bridge, done properly
We cut out failed sealant, set the joint depth with closed-cell backing rod and reseal with a low-modulus exterior sealant. The colour is chosen to suit the brick or render so the joint doesn’t stand out. We work on copings & trims, joints between brick and frames and brickwork movement joints, and the jobs we see most are cracked joints where brick meets render or frames and hard, crazed mastic that has stopped moving.
In a village or hamlet like Bridge, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.
- Place
- Bridge (CT4)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Quotes for external mastic in Bridge
For a quick quote, just ask. The main things that affect it are:
- Whether old sealant or filler has to be cut out
- Any mould that needs treating
- Any working-time requirements on site
- How many areas need sealing
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, call 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
What we need to know
When you contact us, these details help:
- Whether it has been sealed before
- Any access issues, like height or stairs
- The rough size of the job
- Pictures of the joints, sent by email
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Common problems we fix in Bridge
Joints sealed without backing rod, or far too deep, rarely last. Sealant bonded to three sides has nowhere to go and tears as soon as the joint widens.
Most people get in touch when they notice something like this:
- Cracked joints where brick meets render or frames
- Water getting into walls through failed joints
- Panel joints letting water in
- Weeds or debris growing in open joints
For site and facilities teams at buildings such as Bridge and Patrixbourne Church of England Primary School, larger buildings have long runs of movement joint that eventually need resealing.
Comparing quotes
- Whether all the old sealant comes out first
- Which sealant they’ll use, and why
- What guarantee comes with the work
- What preparation is included
Outside joints around Bridge
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. With historic houses such as Goodnestone Park (about 4.4 miles east) nearby, there’s older building stock in the area around Bridge as well as newer homes. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
Letting a property close to Bekesbourne station? Then split movement joints are easy to miss on a rental until damp shows inside. For an older house near a landmark such as Church of St Peter, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Bridge is about 3 miles south-east of Canterbury, in Kent. Every kind of property in Bridge is covered for external mastic. Every job comes with our one-year guarantee. Our area takes in 922 places across Kent, from the larger towns to small villages. Our Chelmsford page covers work nearby (44 miles or so).
We cover every part of CT4 for external mastic. Whether your property is on High Street, Station Road and Western Avenue or a nearby road, we can help. Other places close to Bridge include Patrixbourne (1 mile north-east), Bishopsbourne (1 mile south), Bekesbourne Hill (1 mile north-east), Bekesbourne (1 mile north-east) and Kingston (2 miles south-east). Within a short drive, we also cover Ashford (13 miles south-west), Canterbury (3 miles north-west), Margate (15 miles north-east), Dover (11 miles south-east), Folkestone (11 miles south) and Ramsgate (14 miles north-east).
What’s near Bridge
We work in homes and buildings around The Bridge Arms and St. Anselm's Catholic School. For rail, the closest station is Bekesbourne station, roughly 1.2 miles north-east of the centre. Well-known places in the area include Canterbury Roman Museum (2.9 miles north-west) and Kent and Canterbury Hospital (2.1 miles north-west). For a walk, there’s Blean Woods RSPB Reserve.
What happens on the day
On the day, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before we start. Most jobs take a few hours to a few days, depending on the length of joint and the access. In a small place like Bridge, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Each joint is checked and the colour of the new sealant agreed.
- We take out the old sealant until the faces are sound.
- Backing rod goes in so the sealant can stretch between the two faces.
- Primer is applied wherever the sealant needs it.
- We gun in low-modulus sealant and tool it neatly.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Tell us about any previous sealing or DIY attempts
- Clear the area around the work
Getting a quote
We do not publish a price list. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or drop us an email.
Related advice
What we can’t put right
To be straight with you, some problems need a different trade:
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
- Cracked brickwork or render that needs a builder or plasterer
- Structural movement, which needs a surveyor or engineer
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Surfaces we seal
- Brickwork movement joints
- Façade panels
- Copings & trims
- Render & cladding joints
- Concrete & block
- Joints between brick and frames
Different surfaces, different methods
Cladding and façade panels
Where a cladding system has its own specified sealant, we follow it or an approved alternative. Tell us what the building has when you get in touch.
Joints between dissimilar materials
Joints where frames, sills or panels meet the wall are common leak points. We cut out the old sealant and reseal with a product suited to both surfaces.
Towns and villages near Bridge
What else we do in Bridge
Leave it or put it right?
Resealing a run of joints in one go is usually better than patching one at a time. Joints of the same age tend to fail together, and access only has to be arranged once. Older cottages and farmhouses around Bridge can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why choose Mr Mastic in Bridge
- 180+ five-star Google reviews
- Over 20 years’ experience
- Full insurance on every job
- Colour agreed with you before work begins
See our cost guide and what customers say.
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly.
FAQs for Bridge
Will you come out to Bridge?
Yes. Bridge is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is Bridge in your area for external mastic?
Yes, Bridge is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll send you a clear quote.
Why do you put foam in the joint first?
The foam is closed-cell backing rod. It keeps the sealant at the right depth and bonded to the sides only, which would stop it stretching.
What should I tell you?
Tell us what needs doing and where, plus pictures if you have them. If we need more, we will ask.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints.
Are you insured?
Yes, we’re fully insured for domestic and commercial work.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.