Na h-Eileanan Siar · Scotland
West Side Commercial Sealant
Our applicators work in West Side on sealant work for offices, hotels, washrooms and commercial buildings. Old sealant removed completely, joints prepared properly.
- Failed joints in office kitchens and tea points
- Large numbers of bathrooms needing the same work
- Tired sealant ahead of a health and safety audit
What commercial sealant looks like in West Side
For seaside hotels, guest houses and holiday lets around West Side, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Work on the islands has to be planned around ferry crossings and the weather, so the more notice, the better.
In and around West Side, as anywhere, good commercial sealant starts with a clean, dry, properly prepared joint.
West Side is about 11 miles north-west of Stornoway, in Na h-Eileanan Siar. We provide commercial sealant to householders, landlords and businesses in West Side. Across Na h-Eileanan Siar, we cover 87 places, West Side among them.
Work in HS2 is quoted and booked the same way as anywhere else. Whether your property is on Gleann Mor, Heatherhill and Sraid na Loch or anywhere close by, our applicators can take on the job. If you are just outside West Side, we cover Barabhas (1 mile north-west), Bragar (4 miles west), Shader (4 miles north-east), Borgh (6 miles north-east) and Shawbost (7 miles west). For island and remote addresses, a little more planning is needed, so let us know when you get in touch.
Local landmarks in West Side
Green spaces nearby include Loch Mòr Bharabhais and Roishal More.
How we handle commercial sealant in West Side
Mr Mastic brings more than 20 years’ experience to commercial sites, and we’re fully insured and ARBOMaster approved. Tell us what paperwork your site needs, such as RAMS or insurance details, and we’ll confirm what we can provide. If you have split sealant where wet room floors meet walls and failed joints in office kitchens and tea points, we can help, whatever the surface.
In a smaller place like West Side, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
All of our work is guaranteed for twelve months.
- Location
- West Side (HS2)
- Wider area
- Na h-Eileanan Siar
- Cover
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we are called out for in West Side
Internal washrooms and en suites without a window rely entirely on extraction, so if the fan is weak, steam lingers and the sealant stays damp. That is when black mould sets into the bead.
Signs it’s time to call us include:
- Repeated reseals that do not last
- Tired sealant ahead of a health and safety audit
- Mouldy washroom sealant that staff and guests notice
- Failed joints in office kitchens and tea points
For jobs in and around West Side, choosing the right material for each joint is as important as a tidy finish.
Questions to ask before booking
- Whether they’re fully insured
- How long to leave it before use
- Whether you can choose the colour
- Who does the work, and how experienced they are
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Certifying fire stopping or building compliance
- A broken extractor fan behind the mould problem
- A shower tray, bath or basin that’s cracked or broken
If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before you book.
Surfaces we seal
- Hotel bathrooms
- Retail & leisure sites
- Office washrooms & kitchens
- Welfare facilities
- Student & care accommodation
- Rental portfolios
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
How the visit works
When we arrive, we look over the joints with you first, so you know exactly what we’re doing. We protect the surfaces around the joints before we start. Most jobs take a few hours per room, so whole buildings are phased. Outdoor work around West Side depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- Tell us the rooms, hours and site rules, and we’ll plan the programme.
- Tell us what paperwork your site needs, and we confirm what we can supply before any work starts.
- In each room, the old bead comes out and the joint is cleaned and treated.
- Anti-fungal sanitary silicone goes into wet areas, with suitable sealant elsewhere.
- Rooms are handed back in order, each with its cure time.
Getting ready for the visit
- Mention any parking rules near the property
- Clear the area around the work
- Let us know about stairs, lifts or work at height
How to get a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Read more
How we quote for commercial sealant
Call for a quick quote. What matters most is:
- The old material and how stubborn it is
- Whether there’s mould to deal with
- How many areas need sealing
- Access and height
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
What we need to know
To make quoting easier, please include:
- Whether it’s a home or a business
- A few photos by email, if you can
- How many joints, rooms or windows are involved
- If someone has resealed it before
Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Other services in West Side
Keeping the joints in good condition
So the new joints stay in good condition:
- Book larger programmes for quieter times of year
- Ask cleaners to go gently on the silicone
- Put a squeegee in each shower
- Get split or lifting joints looked at early
Extract fans need to work. Where a room has no window, the fan is what dries it out, and that’s what keeps mould away.
Signs to look for: mould, splits, peeling corners or water marks downstairs. Any of these means the joints need attention.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
FAQs for West Side
Is there a guarantee on commercial sealant in West Side?
All our work, in West Side and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Is West Side within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Just mention lanes, gates or anything else about the route when you book.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
Where do you work from?
We are based in Crawley, and we cover South East England, London and all of Scotland.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Can you take on a whole building?
Yes. Larger jobs are planned as a room-by-room or floor-by-floor programme, keeping most of it in use.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
How soon can a room be used after resealing?
Normally after around 24 hours. Each room is handed back with the cure time for the product used.