Kent · England
St Mary's Bay Commercial Sealant
Problem with your washrooms, bathrooms and kitchens in St Mary's Bay? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Mouldy washroom sealant that staff and guests notice
- Tired sealant ahead of a health and safety audit
- Split sealant around staff kitchen worktops and sinks
About our commercial sealant in St Mary's Bay
Bigger commercial jobs in St Mary's Bay begin with a site walk to agree the scope, the order and the working hours. After that, you get one clear quote. For commercial sealant in St Mary's Bay, just call 0345 464 0079 or email us. We are often asked to deal with joints that need doing before an inspection or audit and washroom sealant that looks dirty however often it’s cleaned, across office washrooms & kitchens, rental portfolios and welfare facilities.
For a pub, café, guest house or shop in or near St Mary's Bay, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.

- Where
- St Mary's Bay (TN29)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
When it is not the sealant
We’d rather tell you now than do work that will not last, so these are the limits:
- Water coming from plumbing rather than sealant
- Certifying fire stopping or building compliance
- Cracked trays or baths rather than failed joints
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before you book.
What we seal
- Hotel bathrooms
- Welfare facilities
- Office washrooms & kitchens
- Rental portfolios
- Retail & leisure sites
- Student & care accommodation
Leave it or put it right?
A quick bead over the old sealant might get a room back in use today, but it will not bond, and it lifts again soon. Doing it properly once is less disruptive than doing it badly twice. Around St Mary's Bay, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why book with us
- More than 20 years in sealant work
- You choose the colour before work begins
- Arbo and Everbuild products
- Domestic, commercial and hotel work
Read our cost guide or customer reviews.
Commercial sealant around St Mary's Bay
If you run a hotel, guest house or holiday let in a coastal place like St Mary's Bay, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Managing a site like The Marsh Academy? Then busy washrooms and kitchens can be resealed in phases so they stay open.
St Mary's Bay is about 6 miles south-west of Hythe, in Kent. St Mary's Bay gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Our area takes in 922 places across Kent, large and small. You can also see our page for Brighton, about 50 miles away.
Our applicators cover all of TN29 for commercial sealant. We cover properties on Maple Drive, Oak Drive and Beechwood Close. If you are just outside St Mary's Bay, we cover St Mary in the Marsh (1 mile west), Burmarsh (3 miles north), Newchurch (3 miles north-west), Postling Green (5 miles north) and Bonnington (6 miles north). Within a short drive, we also cover Ashford (10 miles north-west), Folkestone (10 miles north-east), Hythe (6 miles north-east), Hawkinge (11 miles north-east), Tenterden (13 miles west) and Cheriton (9 miles north-east).
Near you in St Mary's Bay
Around St Mary's Bay, our work takes us to homes and buildings near Romney Warren Country Park and the streets around them. Well-known places in the area include Romney 'castle' (3.6 miles west).
Also near St Mary's Bay
Also in St Mary's Bay
Common problems we fix in St Mary's Bay
In an accessible wet room, water spreads across the floor every use, so floor-to-wall joints take standing water. Any split there can let water through quickly.
Signs it’s time to call us include:
- Leaks from showers into rooms or ceilings below
- Joints that need doing before an inspection or audit
- Black, stained silicone in guest bathrooms
- Split sealant where wet room floors meet walls
For buildings such as All Saints, halls and community kitchens see heavy use, and their sealant shows it.
Questions to ask before you book
- Whether all the old sealant comes out first
- How hidden problems are handled
- Which sealant they’ll use, and why
- What the cure time is
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
FAQs for St Mary's Bay
Is there a guarantee on commercial sealant in St Mary's Bay?
All our work, in St Mary's Bay and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Is St Mary's Bay within the area you cover?
Yes, St Mary's Bay is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you provide RAMS?
Tell us what your site asks contractors for. We’ll confirm what we can provide alongside the quote.
Can you reseal every bathroom in a hotel?
Yes. We’ll walk the site, agree the scope and the order, and you get one clear quote.
How long does commercial sealant take?
That depends on the amount of work, but most jobs take a few hours for a single washroom, longer for a whole building. We will tell you when we quote.
Can you match the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
How soon can a room be used after resealing?
Follow the cure time we give you, which is generally around 24 hours. A room-by-room programme keeps only a few rooms out at once.
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured for the work.
What the job involves on each surface
Student & care accommodation
In care settings, we agree the order and timings with staff, and staff are told when each bathroom can be used.
Retail & leisure sites
Customer washrooms are part of the impression a business makes, and fresh sealant makes them look well kept.
What we do, step by step
At the end, we look at the finished work together and explain the cure time. The work normally takes as long as the scope needs, from one welfare room to a full building, depending on the amount of work. A visit to St Mary's Bay is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We agree a programme with you: which rooms, in what order, at what times.
- We go through your site’s paperwork needs, such as RAMS, before work begins.
- Old sealant is cut out room by room and joints cleaned and treated.
- We reseal with the right product for each joint.
- Each finished area is checked with you and given a cure time.
How to prepare
- On commercial sites, let us know about site rules
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
Get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you are ready, phone 0345 464 0079 or send us an email.
