Kent · England

Commercial Sealant in Sellindge

Commercial sealant for Sellindge, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Split sealant where wet room floors meet walls
  • Large numbers of bathrooms needing the same work
  • Water marks on ceilings under bathrooms

Trusted commercial sealant in Sellindge

How we handle commercial sealant in Sellindge

In showers and washrooms we use anti-fungal sanitary silicone, with a food-safe sealant by kitchen sinks where needed. We use sealants from Arbo and Everbuild, chosen to suit each joint. If you have leaking joints in shower rooms and changing areas and black, stained silicone in guest bathrooms, we can put it right, whatever the surface.

For a small place like Sellindge, the journey and timings are agreed in advance, so it can be fitted around guests, customers or events where possible.

The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.

Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall
Where
Sellindge (TN25)
Region
Kent
Cover
A year, on every job
Price
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026

Commercial buildings in Sellindge

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Rented homes near Westenhanger station change hands often, and sealant work can be quoted for a single flat or a whole portfolio. If you look after a building such as Sellindge Primary School, busy washrooms and kitchens can be resealed in phases so they stay open. If you look after a church, hall or community building such as Church of St Mary, its kitchen and washroom sealant needs looking after like anywhere else.

Sellindge is about 4 miles north-west of Hythe, in Kent. Homes, rented property, offices and hotels in Sellindge is covered for commercial sealant. The work is guaranteed for a year. Across Kent, we cover 922 places, and Sellindge is one of them. We also work in Chelmsford, about 49 miles from Sellindge.

We cover every part of the TN25 postcode area for commercial sealant and the streets around it. You’ll find streets such as Downs Way, Woodlees Close and Swan Green. Close by, we work in Moorstock (1 mile north), Stanford (2 miles east), Postling (3 miles east), Stowting (3 miles north-east) and Skeete (3 miles north-east). We also work in nearby towns such as Ashford (6 miles north-west), Canterbury (13 miles north), Dover (13 miles east), Folkestone (7 miles east), Faversham (15 miles north) and Hythe (4 miles south-east).

Local landmarks in Sellindge

Sellindge’s nearest station is Westenhanger station, about 1.6 miles south-east. Nearby you’ll also find William Harvey Hospital (4.7 miles north-west) and Lympne Castle (2.4 miles south). For a walk, there’s Tolsford Hill and Hatch Park.

Map of Sellindge © OpenStreetMap contributors

How to look after the new joints

Good habits help new joints last longer. Our tips:

  • Note the date each area was done
  • Keep strong chemicals and scourers off the joints
  • Keep extractor fans working and serviced
  • Include the silicone on your room checklists

A squeegee in each shower is a simple help: walls and trays dry faster, and so does the sealant.

Rooms out of use cost a hotel or landlord money. Catching faults early means they can be put right in a short window, before they become leaks that take the room out of use.

What affects the cost of commercial sealant

There’s no set price list, because jobs vary so much. The quote depends on:

  • Whether there’s mould to deal with
  • How many areas need sealing
  • When we can work, for business premises
  • Access and height

We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or send us an email.

Helping us quote

To help us quote quickly, let us know:

  • What the problem is, such as mould, gaps, leaks or cracking
  • Any access issues, like height or stairs
  • Roughly how big the job is
  • The type of property

Need a quote? Please ring 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.

The process

When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes as long as the scope needs, from one welfare room to a full building. Somewhere as small as Sellindge, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. Tell us the rooms, hours and site rules, and we will plan the programme.
  2. We go through your site’s paperwork needs, such as RAMS, before work begins.
  3. In each room, the old bead comes out and the joint is cleaned and treated.
  4. Anti-fungal sanitary silicone goes into wet areas, with suitable sealant elsewhere.
  5. Each finished area is checked with you and given a cure time.

How to prepare

  • Clear the area around the work
  • Let us know about parking restrictions
  • Keep children and pets away from the work area

How to get a quote

To get a quote, ring 0345 464 0079 or send us an email with the location and a short description of the problem. We will give you a clear price before any work starts.

Ask for a quote

Related advice

Questions from Sellindge

Do you cover Sellindge for commercial sealant?

Yes, Sellindge is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.

Is Sellindge within the area you cover?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can I choose the sealant colour?

We help you choose a colour that suits. The choice depends on the product the joint needs.

Is it worth trying it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.

Can I add another job to the visit?

Yes, we can. More than one area can be quoted together.

Will there be a smell?

Sometimes, a little. Any smell clears as the sealant cures.

Do you work for landlords and agents?

Yes, we can. Send us the addresses and what needs doing, and we’ll quote for the lot.

Will you leave a mess?

Not at all. We work neatly, protect the area around the joints and tidy up afterwards.

Why deal with it now?

Guests and staff judge a building by its bathrooms. Black sealant makes a clean room look dirty, and scrubbing will not fix it. Replacing it does. Around Sellindge, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

The cost depends on how much there is to do, how much old material has to come out and access to the work. You will have a clear quote before any work starts.

Why book with us

  • An ARBOMaster approved applicator
  • Quality sealants from Arbo and Everbuild
  • We never seal over old sealant
  • Neat joints and a tidy finish

Take a look at our cost guide or customer reviews.

What the job involves on each surface

Rental portfolios

A sound seal protects the property as well as its appearance, especially where you rarely see the bathroom yourself.

Welfare facilities

Welfare facilities, shower rooms and changing areas need to stay usable. We can plan the work in sections so part of the facilities stays in use.

Work for landlords, hotels and businesses

Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.

If you manage several properties in or around Sellindge, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.

DIY versus a professional finish

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job