Kent · England
Commercial Sealant in Old Tree
Problem with your washrooms, bathrooms and kitchens in Old Tree? We remove the old material, prepare the joints and seal them properly.
- Repeated reseals that do not last
- Tired sealant ahead of a health and safety audit
- Mouldy bathrooms flagged at a tenancy check
Commercial sealant for homes and businesses in Old Tree
Mouldy or split sealant in a commercial building causes more than a bad impression. It’s a cleaning problem, a leak risk and something guests and staff notice. We reseal bathrooms, washrooms, welfare areas and kitchens so they look cared for again. Common call-outs are for failed floor-level joints in accessible wet rooms and rental bathrooms that need resealing between tenants, on rental portfolios, office washrooms & kitchens and student & care accommodation.
In a village or hamlet like Old Tree, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Old Tree (CT3)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Workplaces and buildings in Old Tree
For seaside hotels, guest houses and holiday lets around Old Tree, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For site and facilities teams at buildings such as Hoath Primary School, sealant in washrooms, kitchens and changing areas can be renewed around term times or opening hours. If you look after a church, hall or community building such as Church of the Holy Cross, halls and community kitchens see heavy use, and their sealant shows it.
Old Tree is about 3 miles south-east of Herne Bay, in Kent. Whether you are in the middle of Old Tree or further out, we cover commercial sealant for every kind of property. Old Tree is one of 922 towns and villages in Kent where we work for commercial sealant. Our Chelmsford page covers work nearby, about 40 miles away.
Jobs for commercial sealant in CT3 works the same way as everywhere else we cover. If you’re just outside Old Tree, we cover Maypole (1 mile west), Hoath (1 mile south-west), Millbank (1 mile north-west), Knave's Ash (1 mile south-west) and Hollow Street (1 mile south-east). Larger places within reach include Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (10 miles east), Broadstairs (11 miles east) and Whitstable (6 miles west).
Around Old Tree
In Old Tree, that means homes and buildings near Curtis Wood and Spires Academy. The closest station to Old Tree is Herne Bay station, roughly 2.9 miles north-west. Well-known places in the area include St Martins Hospital (5.1 miles south-west). Green spaces nearby include West Blean and Thornden Woods.
Questions from Old Tree
I let a flat near Herne Bay station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Can you do commercial sealant in Old Tree?
Yes, Old Tree is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or email us and let us know what needs doing, and we will send you a clear quote.
Can you work around guests in a hotel?
Yes. The order and timing are agreed with your team, and you’ll know when each room can be used.
Do you take on large, multi-room jobs?
Yes. With more than 20 years’ experience and over 2,847 projects behind us, we plan big jobs so the building keeps running.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or drop us an email.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Places near Old Tree
More services for Old Tree
Common problems we fix in Old Tree
A rushed reseal between guests rarely lasts. New silicone over old, joints that weren’t dried, or an unsuitable product all lead to the same thing: another reseal before long.
The problems people generally mention when they call are:
- Worktop sealant that has shrunk and stained
- Tired sealant in let properties
- Shower leaks reaching the floor below
- Sealant failing again soon after quick repairs
If you let a flat or house near Herne Bay station, sealant work can be quoted for a single flat or a whole portfolio.
What your quote should include
- What insurance they hold
- Is the old sealant removed completely?
- How the joint is cleaned and prepared
- Whether you can choose the colour
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
What we do, step by step
Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a morning for a small washroom, and a planned programme for bigger sites. For a village or hamlet like Old Tree, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with a site walk to agree the rooms and the timing.
- Room by room, we protect the area and remove all the old sealant.
- We clean the joints, treat any mould and let them dry.
- We lay the right sealant for each area, with anti-fungal silicone in wet rooms.
- Rooms are checked and returned with a cure time so staff know when to use them.
How to prepare
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
- For business premises, tell us about site rules or sign-in
Getting a quote
We quote each job on its own. Simply phone 0345 464 0079 or drop us an email and describe the job.
Read more
What affects the quote in Old Tree
Jobs vary more than people expect. What affects the quote:
- Which sealant suits the joint
- Any working-time requirements on site
- The old material and how stubborn it is
- Mould in or behind the old joints
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
To make quoting easier, please include:
- Any previous sealing or DIY work
- Roughly how big the job is
- A few photos by email, if you can
- The problem you’ve noticed
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or send us an email.
Different surfaces, different methods
Welfare facilities
Failed sealant in welfare areas is a simple fix before an audit. Let us know when it needs to be done and we’ll plan the work and cure time around it.
Office washrooms & kitchens
Staff toilets, washrooms and kitchens get constant use, so we can work early or out of hours where that can be arranged. We reseal around basins, urinals, worktops and sinks.
What we cannot put right
It helps to know what we cannot do:
- Extraction that isn’t working, which needs an electrician or ventilation contractor
- Cracked trays or baths rather than failed joints
- Water damage behind the tiles that needs a tiler or builder
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
Surfaces we seal
- Welfare facilities
- Hotel bathrooms
- Retail & leisure sites
- Office washrooms & kitchens
- Rental portfolios
- Student & care accommodation
What happens if it’s left?
Room by room, the work is quick: it takes a few hours per area, with larger sites planned over several visits. Each area is then left to cure for the time we give you, so planning the order matters more than the hours on site. Where a wall is exposed, as many are in small places like Old Tree, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Why us?
- We never seal over old sealant
- We agree the colour with you first
- Full insurance on every job
- Anti-fungal sanitary silicone in wet areas
See our cost guide and our reviews.