Kent · England
Commercial & hotel sealant in Ditton, Kent
Professional commercial sealant in and around Ditton, with old sealant always removed completely and a one-year guarantee.
- Failed floor-level joints in accessible wet rooms
- Large numbers of bathrooms needing the same work
- Mouldy bathrooms flagged at a tenancy check
Commercial sealant for homes and businesses in Ditton
Mouldy or split sealant in a commercial building causes more than a bad impression. Cleaners struggle with it, water gets through it and people notice it. We reseal bathrooms, washrooms, welfare areas and kitchens so they look cared for again. If you’re dealing with silicone laid over old silicone by a previous contractor and large numbers of bathrooms needing the same work, we can help, whatever the surface.
For a pub, café, guest house or shop in or near Ditton, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
Big or small, it’s backed by our one-year guarantee in Ditton and across Kent.
- Location
- Ditton (ME20)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Commercial buildings in Ditton
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Ditton Infant School are buildings too, and sealant in washrooms, kitchens and changing areas can be renewed around term times or opening hours. Community buildings like St Peter's Church are part of the picture too: halls and community kitchens see heavy use, and their sealant shows it. For landlords with property near Aylesford station, we can quote for one property or a whole portfolio of rentals.
Ditton is about 4 miles north-west of Maidstone, in Kent. Our applicators cover commercial sealant for householders, landlords and businesses in Ditton. We cover 922 towns and villages across Kent, from the larger towns to small villages. There’s also a page for London, roughly 28 miles from Ditton.
Our applicators cover all of ME20 for commercial sealant. Whether your property is on London Road, Station Road and Scott Close or a nearby road, we can help. Other places close to Ditton include Aylesford (1 mile east), East Malling (1 mile west), Well Street (1 mile south-west), Allington (2 miles east) and West Malling (2 miles west). Further out, we also cover Maidstone (4 miles south-east), Sittingbourne (13 miles east), Dartford (14 miles north-west), Sevenoaks (12 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (10 miles north).
Local landmarks in Ditton
We work in homes and buildings around Aylesford School, The Malling School and Kentish Quarryman pub, among other places. For rail, the closest station is Aylesford station, roughly 0.6 miles north-east of the centre. Well-known places in the area include Leybourne Castle (1.6 miles north-west) and Fremlin Walk (3.1 miles south-east). Not far away are Burham Down and Blue Bell Hill.
What happens on the day
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours per room, so whole buildings are phased. In a smaller place like Ditton, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We walk the site with you and agree the rooms, the order and the hours.
- Room by room, we protect the area and remove all the old sealant.
- We clean the joints, treat any mould and let them dry.
- We lay the right sealant for each area, with anti-fungal silicone in wet rooms.
- We check every room and give its cure time for housekeeping.
Getting ready for the visit
- Keep children and pets away from the work area
- Try not to wet indoor joints just before the visit
- Mention any tricky access
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Advice
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Housing providers, facilities teams and property managers book us too in Ditton and across Kent. Several sites can be quoted together, and we are fully insured.
How we quote for commercial sealant
Your quote is based on your job. We look at:
- Whether there’s mould to deal with
- Which sealant suits the joint
- Access and height
- Working hours on commercial sites
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Call for a quick quote and we will explain what it covers.
Asking for a quote
To make quoting easier, please include:
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- Roughly how big the job is
- The address or postcode of the job
Want a quote for commercial sealant? Please phone 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and give you a clear quote before we start.
How the job changes by surface
Welfare facilities
Staff welfare areas are needed every shift. Work can be split into sections so part of the facilities stays in use.
Office washrooms & kitchens
Staff toilets, washrooms and kitchens get constant use, so the work can be arranged for quieter times. Basins, urinals, worktops and sinks are all resealed.
Leave it or put it right?
Guests and staff judge a building by its bathrooms. Black sealant makes a clean room look dirty, and scrubbing won’t fix it. New sealant does. Homes in smaller places like Ditton can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why choose Mr Mastic in Ditton
- Quality sealants from Arbo and Everbuild
- Fully insured
- Anti-fungal silicone where joints get wet
- Approved under the ARBOMaster scheme
See what affects the cost and our reviews.
Also in Ditton
Questions from Ditton
Can you do commercial sealant in Ditton?
Yes, Ditton is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or drop us an email and let us know what needs doing, and we will give you a clear price.
Will you come out to Ditton?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Do you work for letting agents and landlords?
Yes. For several properties, we can plan the work as one programme, fitting around access to each property.
Does commercial work come with a guarantee?
Yes. We give a 12-month guarantee on every job and are fully insured.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
What does commercial sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or email us with a short description of the job.
How to look after the new joints
Looking after new joints is easy:
- Include the silicone on your room checklists
- Keep extractor fans working and serviced
- Note the date each area was done
- Put a squeegee in each shower
Squeegees in guest and staff showers help: less water sits on the joints between uses.
In a commercial building, a leak can quickly spread beyond one room: into ceilings below, walls next door and service voids. Dealing with the joint early stops that spread.