Kent · England

Broad Ford Commercial Sealant

Sealant work for offices, hotels, washrooms and commercial buildings for homeowners, landlords and businesses in Broad Ford. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Leaking joints in shower rooms and changing areas
  • Silicone laid over old silicone by a previous contractor
  • Washrooms that need sorting before an inspection

Commercial sealant in Broad Ford

How we handle commercial sealant in Broad Ford

Mouldy or split sealant in a commercial building causes more than a bad impression. It’s a cleaning problem, a leak risk and something guests and staff notice. We reseal bathrooms, washrooms, welfare areas and kitchens so they look cared for again. Typical jobs include joints that need doing before an inspection or audit and large numbers of bathrooms needing the same work, across student & care accommodation, retail & leisure sites and welfare facilities.

For holiday lets, converted business premises or a community building near Broad Ford, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

We stand behind the work with a one-year guarantee, so you’re not left on your own once the job is done.

Location
Broad Ford (TN12)
Wider area
Kent
Cover
A year, on every job
Quote
A clear quote up front
Phone
0345 464 0079
Last updated
26 October 2026
Applicator in a navy top running a bead of silicone up a shower screen wall profile

Different surfaces, different methods

Office washrooms & kitchens

Long vanity tops have joints that hold water and grime. It’s cut out, cleaned and resealed in one neat line.

Rental portfolios

For a portfolio, we can quote several addresses together, with each one done when access suits.

Signs you need commercial sealant in Broad Ford

Internal washrooms and en suites without a window rely entirely on extraction, and where extraction is poor, damp hangs around. Mould then takes hold in the silicone.

The problems people normally mention when they call are:

  • Tired sealant ahead of a health and safety audit
  • Repeated reseals that do not last
  • Too many rooms to reseal without closing the building
  • Tired sealant in let properties

Community buildings like Church of St Margaret are part of the picture too: halls and community kitchens see heavy use, and their sealant shows it.

Before booking anyone

  • How the joint is cleaned and prepared
  • How long the guarantee is
  • What happens if the job turns out different
  • What insurance they hold

10 questions to ask before you book

Workplaces and buildings in Broad Ford

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.

Managing a site like Horsmonden Primary School? Then washroom and kitchen sealant can be programmed around term times or opening hours. Letting a property close to Marden station? Then several rental properties can be resealed on one programme.

Broad Ford is about 8 miles east of Royal Tunbridge Wells, in Kent. Whether you’re in the middle of Broad Ford or further out, we cover commercial sealant for every kind of property. We cover 922 towns and villages across Kent, from the larger towns to small villages. We also work in Crawley, about 28 miles from Broad Ford.

Every address in TN12 is within our area for commercial sealant, from the main roads to the quietest streets. If you’re just outside Broad Ford, we cover Capel Cross (1 mile north), Brandfold (1 mile east), Smallbridge (1 mile south-west), Horsmonden (1 mile north-west) and Hazel Street (1 mile west). Within a short drive, we also cover Maidstone (10 miles north), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (8 miles west), Tonbridge (9 miles north-west), Kings Hill (10 miles north) and Foley Park (11 miles north).

Around Broad Ford

Typical jobs here are in homes near The Gun And Spitroast Public House And Rear Courtyard and The Gill. The nearest railway station is Marden station, about 3.6 miles north-east of the centre. Other landmarks nearby include Old Scotney Castle (3.1 miles south-west) and Finchcocks Musical Museum (2.1 miles south-west). For a walk, there’s Bewl Water.

Map of Broad Ford © OpenStreetMap contributors

Work for landlords, hotels and businesses

We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Quotes for commercial sealant in Broad Ford

Every job gets its own quote. This is what makes a difference:

  • How many rooms, windows or areas are involved
  • Whether there’s mould to deal with
  • The size of the job
  • Any working-time requirements on site

The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.

Helping us quote

A few details help us give you an accurate quote. When you get in contact, it helps to mention:

  • Whether it’s a home or a business
  • Where the job is, and your postcode
  • What the problem is, such as mould, gaps, leaks or cracking
  • How we’d reach the joints

Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.

FAQs for Broad Ford

I let a flat near Marden station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.

Is Broad Ford in your area for commercial sealant?

Yes. We work across London and the South East, and Broad Ford is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.

Is out-of-hours working possible?

In many cases. Tell us your opening hours and quiet times, and we’ll plan the work around them.

How long will you be here?

As a guide, most jobs take as long as the scope needs, from one welfare room to a full building. Bigger jobs take longer, and we’ll tell you how long to expect.

What do you put in the joint?

We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.

Can I do it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Do I need to be at home?

For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.

Is it OK to seal over old sealant?

No, it will not last. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.

What we can’t put right

Honest advice matters more to us than a booking, so here’s what sealant can’t fix:

  • Tiles coming off the wall
  • Leaking pipework, valves or wastes (a plumber’s job)
  • Assessing what fire stopping a building needs

If you’re not sure, just ring 0345 464 0079 or email us and we will give you a straight answer before booking.

Joints and surfaces we work on

  • Retail & leisure sites
  • Rental portfolios
  • Student & care accommodation
  • Hotel bathrooms
  • Office washrooms & kitchens
  • Welfare facilities

What we do, step by step

We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours for a single washroom, longer for a whole building. In a small place like Broad Ford, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We agree a programme with you: which rooms, in what order, at what times.
  2. Tell us what paperwork your site needs, and we confirm what we can supply before any work starts.
  3. Old sealant is cut out room by room and joints cleaned and treated.
  4. Anti-fungal sanitary silicone goes into wet areas, with suitable sealant elsewhere.
  5. Rooms are handed back in order, each with its cure time.

Getting ready for the visit

  • Try not to wet indoor joints just before the visit
  • Let us know about earlier repairs to the joints
  • Let us know about stairs, lifts or work at height

Getting a quote

To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.

Get a price

Related advice

Should I try it myself first?

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job