Kent · England
Commercial & hotel sealant in Aylesham, Kent
Sealant work for offices, hotels, washrooms and commercial buildings in Aylesham, with a one-year guarantee on every job. Call for a quick quote.
- Joints that need doing before an inspection or audit
- Tired sealant in let properties
- Failed joints in office kitchens and tea points
Why it’s worth doing now in Aylesham
Sealant is easy to forget until an audit or inspection is due. Planning the work ahead means rooms are finished and cured in time, without a last-minute rush. In a smaller place like Aylesham, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will go through it with you.
What you get with us
- A sealant colour to suit the surroundings
- Experience in homes, commercial sites and hotels
- Fully insured
- Old sealant always removed completely
Read how sealant jobs are priced and our reviews.
Commercial sealant for homes and businesses in Aylesham
In a hotel, office or washroom, failed sealant is more than an eyesore. It’s a cleaning problem, a leak risk and something guests and staff notice. Our applicators renew sealant across washrooms, welfare areas, kitchens and guest bathrooms. We are often asked to deal with worktop sealant that has shrunk and stained and repeated reseals that don’t last, on office washrooms & kitchens, welfare facilities and hotel bathrooms.
If you run a pub, café, guest house or shop in or near Aylesham, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Place
- Aylesham (CT3)
- Wider area
- Kent
- Cover
- One year on every job
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
Aftercare is simple:
- Put a squeegee in each shower
- Tell cleaning staff when each room can be used
- Log resealing so you know what’s due
- Add sealant to your planned maintenance checks
Add sealant checks to your planned maintenance. A quick look at each bathroom when rooms are checked spots problems early.
Mould in shared washrooms gets noticed and talked about. Left long enough, it spreads through the bead, so the fix is replacement.
The process
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes as long as the scope needs, from one welfare room to a full building. In a smaller place like Aylesham, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We start by looking at the rooms and agreeing what’s needed.
- We agree when we’ll work, with early or out-of-hours slots where they can be arranged.
- Areas are protected and the failed sealant removed.
- Joints are dried, then resealed and tooled neatly.
- Housekeeping or site staff are told when each area can be used.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
Advice
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
If you manage several properties in or around Aylesham, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Aylesham questions
Is Aylesham within the area you cover?
Yes, Aylesham is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do commercial sealant in Aylesham?
Yes, Aylesham is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear price.
Is out-of-hours working possible?
In many cases. Tell us your opening hours and quiet times, and we’ll plan the work around them.
Do I have to be there?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
How long does the job take?
Most jobs take a morning for a small washroom, and a planned programme for bigger sites, including preparation and clearing up. We will confirm how long when we quote.
Is it worth trying it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.
What does commercial sealant cost?
Size, access and the old material all affect the cost. Call for a quick quote and we’ll talk you through it.
Will there be a smell?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
Workplaces and buildings in Aylesham
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Schools such as Aylesham Primary School are buildings too, and busy washrooms and kitchens can be resealed in phases so they stay open. If you let a flat or house near Aylesham station, we can quote for one property or a whole portfolio of rentals.
Aylesham is about 6 miles south-east of Canterbury, in Kent. We provide commercial sealant to homes and businesses in Aylesham and the surrounding area, as part of our work across Kent. Aylesham is one of 922 towns and villages in Kent where we work. You can also see our page for Chelmsford, roughly 47 miles from Aylesham.
Postcode districts we cover here for commercial sealant: CT3. Local streets include Market Place, Mexborough Square and Derwent Way, and we cover them all. Nearby, we also carry out commercial sealant in Bloodden (1 mile north), Adisham (1 mile north), Womenswold (1 mile south-west), Woolage Green (2 miles south) and Out Elmstead (2 miles south-west). We also work in nearby towns such as Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (10 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).
Local landmarks in Aylesham
There’s a railway station in Aylesham itself: Aylesham station. A little further out are St Martins Hospital (5.2 miles north-west).
Honest limits
We will always be straight with you, so here’s what new sealant will not do:
- Faulty shower valves and leaking traps
- Poor ventilation that keeps bringing mould back
- Cracked trays or baths rather than failed joints
If in doubt, call 0345 464 0079 or email us and we will say what we think before booking.
Surfaces we seal
- Office washrooms & kitchens
- Student & care accommodation
- Rental portfolios
- Hotel bathrooms
- Welfare facilities
- Retail & leisure sites
What we are called out for in Aylesham
Wet rooms and accessible showers are designed for the whole floor to get wet, so the joints at floor level are under water often. Any split there can let water through quickly.
Any of these means the joints need attention:
- Repeated reseals that do not last
- Leaks from showers into rooms or ceilings below
- Black, stained silicone in guest bathrooms
- Too many rooms to reseal without closing the building
For buildings such as St Peter, halls and community kitchens see heavy use, and their sealant shows it.
Questions to ask before booking
- Whether you can choose the colour
- Are they insured?
- What happens if they find a problem under the old sealant
- Whether VAT is included
Towns and villages near Aylesham
Other services in Aylesham
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.